• Length [mm]: 102
• Manufacturer: JP GROUP
• Lisainfo: Sensor, brake lining wear, front
• Additional information: Sensor, brake lining wear, front

• Fitting Position: Rear Axle
• Brake System: ATE
• Weight [kg]: 0.02

Lisainfo: Sensor, brake lining wear, front

• Fitting Position: Front Axle
• Required quantity: 1
• Brake Type: Disc Brake
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle, Front Axle
• Brake Type: Disc Brake
• Warning Contact Length [mm]: 92
• Weight [kg]: 0.005
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Brake System: Brembo, TRW
• Length [mm]: 97
• Supplementary Article/Supplementary Info: Axle Kit
• Manufacturer: QUICK BRAKE

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 95
• Weight [kg]: 0.03
• Number of wear indicators [per axle]: 1
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle, Front Axle
• Length [mm]: 94
• Brake Type: Disc Brake
• Weight [kg]: 0.004
• Name: SW 10 91 9186
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Brake System: ATE
• Weight [kg]: 0.02
• Manufacturer: A.B.S.

• Fitting Position: both sides
• Brake Type: Disc Brake
• Weight [kg]: 0.02
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV560
• Manufacturer: ESEN SKV

• Fitting Position: Rear Axle, Front Axle
• paired article number: 23857
• Length [mm]: 94
• Brake Type: Disc Brake
• Weight [kg]: 0.004
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Rear Axle
• Block Separation:
• Length [mm]: 95
• Brake Type: Disc Brake
• Manufacturer: BOSCH
• Name: BS 1987473070

• Brake Type: Disc Brake
• Fitting Position: Rear Axle, Front Axle
• Alternatively:
• Warning Contact Length [mm]: 97
• Weight [kg]: 0.005
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle, Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 95
• Number of wear indicators [per axle]: 1
• Manufacturer: BREMBO
• Name: BR A 00 377

• Fitting Position: Rear Axle, Front Axle
• Required quantity: 1
• Block Separation:
• Brake Type: Disc Brake
• Length 1 [mm]: 55
• Warning Contact Length [mm]: 100
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Rear Axle
• Brake System: ATE
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-2688A

• Fitting Position: Front Axle, Rear Axle
• Brake Type: Disc Brake
• Warning Contact Length [mm]: 95
• Manufacturer: MEYLE

• Fitting Position: Front Axle
• Brake System: TRW

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Type: Disc Brake
• Length [mm]: 100
• Number of wear indicators [per axle]: 2
• Manufacturer: TRW
• Quality class: Q
• Name: Wear indicator

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Required quantity: 1
• Brake Type: Disc Brake
• Length [mm]: 97.5
• Manufacturer: ATE

• Fitting Position: Front Axle
• Brake System: BREMBO

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Type: Disc Brake
• Length [mm]: 102
• Length 2 [mm]: 110
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Type: Disc Brake
• Length [mm]: 95
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Right
• Quality: WP
• for brake disc diameter [mm]: 322
• Diameter 1/ Diameter 2 [mm]: 335/58

• Fitting Position: Front Axle Left
• Quality: WP
• for brake disc diameter [mm]: 322
• Diameter 1/ Diameter 2 [mm]: 335/58

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Length [mm]: 100
• Brake Type: Disc Brake
• Number of wear indicators [per axle]: 1
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Brake System: ATE
• Manufacturer: QUICK BRAKE
• Name: QB 109-1843

• Fitting Position: Front Axle
• Brake System: AKEBONO
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-2888A

• Fitting Position: Front Axle
• Brake System: Brembo, TRW
• Length 1 [mm]: 97
• Brake Type: Disc Brake
• Name: DE LZ0363
• Manufacturer: DELPHI

• Fitting Position: Front Axle
• Brake System: TRW
• Manufacturer: QUICK BRAKE

• Fitting Position: Front Axle
• Brake System: Brembo
• Manufacturer: QUICK BRAKE
• Name: QB 109-1786
• Additional information: QB109-1786
• Lisainfo: QB109-1786

• Fitting Position: Front Axle Left
• Material: Sheet Steel
• Surface: Zinc-coated
• Fabrication Number: HTO-ME-009
• paired article number: HTO-ME-010
• Manufacturer: NTY

• Fitting Position: Front Axle Right
• Material: Sheet Steel
• Surface: Zinc-coated
• Fabrication Number: HTO-ME-010
• paired article number: HTO-ME-009
• Manufacturer: NTY

• Fitting Position: Front Axle Right
• Inner Diameter [mm]: 58
• Outer Diameter [mm]: 335
• for brake disc diameter [mm]: 322
• paired article number: 131-07-185
• Colour: black
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Front Axle Left
• Inner Diameter [mm]: 58
• Outer Diameter [mm]: 335
• for brake disc diameter [mm]: 322
• paired article number: 131-07-186
• Colour: black
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Front Axle Right
• Diameter 1 [mm]: 335
• Material: Aluminium
• for brake disc diameter [mm]: 322
• for OE number: 2124201244
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Left
• Diameter 1 [mm]: 335
• Material: Aluminium
• for brake disc diameter [mm]: 322
• for OE number: 2124201144
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle
• Manufacturer Restriction: ATE
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle Left, Rear Axle Right
• Length [mm]: 724
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle Right
• Material: Sheet Steel
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle Left
• Material: Sheet Steel
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle Right
• Inner Diameter [mm]: 130
• Outer Diameter [mm]: 360
• paired article number: 131-07-665
• Colour: black
• Material: Sheet Steel
• Surface: Cathodic Painting
• Article number of recommended accessories: 231-04-052
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Rear Axle Left
• Inner Diameter [mm]: 130
• Outer Diameter [mm]: 360
• paired article number: 131-07-666
• Colour: black
• Material: Sheet Steel
• Surface: Cathodic Painting
• Article number of recommended accessories: 231-04-052
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Rear Axle
• Brake System: ATE
• Manufacturer: BOSCH

• Fitting Position: Rear Axle Right
• Fabrication Number: HTO-ME-026
• paired article number: HTO-ME-025
• Manufacturer: NTY

• Fitting Position: Rear Axle Left
• Fabrication Number: HTO-ME-025
• paired article number: HTO-ME-026
• Manufacturer: NTY

• for OE number: 212 420 0444
• Fitting Position: Rear Axle Right
• Manufacturer: TRUCKTEC

• Fitting Position: Rear Axle, Right
• Material: Sheet Steel
• Name: CFD 612326
• Manufacturer: DACO

• Fitting Position: Rear Axle, Left
• Material: Sheet Steel
• Name: CFD 612325
• Manufacturer: DACO

• Fitting Position: Rear Axle
• Required quantity: 2
• Cable Length [mm]: 680
• Sensor Type: Hall Sensor
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU358218091

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Front Axle Left
• Outer Diameter [mm]: 335
• Inner Diameter [mm]: 58
• for brake disc diameter [mm]: 322
• Manufacturer: JP GROUP
• Lisainfo: Splash Panel, brake disc
• Additional information: Splash Panel, brake disc

• Fitting Position: Front Axle Right
• Outer Diameter [mm]: 335
• Inner Diameter [mm]: 58
• for brake disc diameter [mm]: 322
• Manufacturer: JP GROUP
• Lisainfo: Splash Panel, brake disc
• Additional information: Splash Panel, brake disc

• Fitting Position: Left, Front Axle
• for brake disc diameter [mm]: 322
• Name: CFD 612323
• Manufacturer: DACO

• Fitting Position: Right, Front Axle
• for brake disc diameter [mm]: 322
• Name: CFD 612324
• Manufacturer: DACO

• paired article number: 174958
• Fitting Position: Front Axle Right
• Weight [kg]: 0.62
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Brake System: Brembo
• Manufacturer: BOSCH

• Fitting Position: Rear Axle Left
• Weight [kg]: 0.6
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 57SKV623

• Fitting Position: Rear Axle Right
• Weight [kg]: 0.61
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 57SKV624

• Fitting Position: Rear Axle Right
• Outer Diameter [mm]: 360
• Inner Diameter [mm]: 130
• Lisainfo: Splash Panel, brake disc
• Additional information: Splash Panel, brake disc

• Fitting Position: Rear Axle Left
• Outer Diameter [mm]: 360
• Inner Diameter [mm]: 130
• Manufacturer: JP GROUP
• Lisainfo: Splash Panel, brake disc
• Additional information: Splash Panel, brake disc

• paired article number: 174959
• Fitting Position: Front Axle Left
• Weight [kg]: 0.205
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Right
• Overall Length [mm]: 720
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 670
• paired article number: 32127
• Weight [kg]: 0.04
• Manufacturer: A.B.S.

• paired article number: 175123
• Fitting Position: Rear Axle Right
• Weight [kg]: 0.531
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Overall Length [mm]: 730
• Length [mm]: 31
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 660
• paired article number: 32114
• Weight [kg]: 0.08
• Manufacturer: A.B.S.

• paired article number: 175124
• Fitting Position: Rear Axle Left
• Weight [kg]: 0.531
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left
• Material: Sheet Steel
• paired article number: 11334
• Weight [kg]: 0.7
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle Right
• Material: Sheet Steel
• paired article number: 11333
• Weight [kg]: 0.7
• Manufacturer: A.B.S.

• for OE number: 212 420 2244
• Fitting Position: Rear Axle Right
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Fitting Position: Rear Axle Left
• Surface: Stoved Enamel, Zinc-coated
• Material: Sheet Steel
• paired article number: V30-3240
• Weight [kg]: 0.517
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle Left
• paired article number: 6115012
• Material: Sheet Steel
• Surface: Cathodic Painting
• Manufacturer: METZGER

• Fitting Position: Rear Axle Right
• paired article number: 6115011
• Material: Sheet Steel
• Surface: Cathodic Painting
• Manufacturer: METZGER

• Fitting Position: Rear Axle Left
• Material: Sheet Steel
• Surface: Cathodic Painting, Zinc-coated
• paired article number: 55102
• Diameter 1/ Diameter 2 [mm]: 130 / 360
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle Right
• Material: Sheet Steel
• Surface: Cathodic Painting, Zinc-coated
• paired article number: 55101
• Diameter 1/ Diameter 2 [mm]: 130 / 360
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle Right
• Number of pins: 2
• Cable Length [mm]: 670
• Overall Length [mm]: 740
• Sensor Type: Active sensor
• Fitting Depth [mm]: 36
• for OE number: A 212 905 03 00
• for article number: 90899
• Manufacturer: MEAT&DORIA

• Fitting Position: Rear Axle
• Required quantity: 2
• for SA code: 800/801/802/803
• Length [mm]: 722
• MAPP code available:
• Manufacturer: ATE

• Fitting Position: Front Axle Left
• Length [mm]: 722
• Sensor Type: Active sensor
• paired article number: GBS2691
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Right
• for SA code: 805, 806, 807, 808
• Length [mm]: 722
• Sensor Type: Active sensor
• paired article number: GBS2690
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Number of connectors: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Cable Length [mm]: 647
• Weight [kg]: 0.041
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• SA code from: 804
• paired article number: 170682
• Number of connectors: 2
• Fitting Position: Front Axle Left
• Cable Length [mm]: 676
• Weight [kg]: 0.044
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• SA code from: 804
• paired article number: 170693
• Number of connectors: 2
• Fitting Position: Front Axle Right
• Cable Length [mm]: 671
• Weight [kg]: 0.044
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• not for SA code: 800,801,802,803
• Manufacturer: METZGER

• Fitting Position: Rear Axle
• Required quantity: 2
• for SA code: 804/805/806/807/808
• Length [mm]: 724
• MAPP code available:
• Manufacturer: ATE

• Fitting Position: Rear Axle
• Lisainfo: 940181 NIS
• Additional information: 940181 NIS