• Siseläbimõõt [mm]: 81
• Välisläbimõõt [mm]: 84
• Materjal: Metall
• Hammastehulk ABS-rõngas: 96
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Kaal (kg): 0,024
• Manufacturer: FEBI BILSTEIN
• Lisainfo: 177539 FEBI
• Additional information: 177539 FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Laius (mm): 10
• Välisläbimõõt [mm]: 73
• Siseläbimõõt 1 [mm]: 71,4
• Siseläbimõõt 2 (mm): 52,2
• Installatsiooni pool: esisild mõlemapoolselt
• Hammastehulk ABS-rõngas: 96
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Siseläbimõõt [mm]: 71
• Laius (mm): 10
• Piirangutega toode/piirangu info 2: magnetiline
• Installatsiooni pool: esisild vasakul, esisild paremal
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Installatsiooni pool: esisild vasakul, esisild paremal
• Tootja piirang: ABS-Ring magnetisch
• Välisläbimõõt [mm]: 73
• Siseläbimõõt [mm]: 53
• Laius (mm): 10
• Manufacturer: METZGER

• Installatsiooni pool: esisild paremal
• Seerianumber: HCA-ME-047
• Manufacturer: NTY

• Installatsiooni pool: esisild vasakul
• Seerianumber: HCA-ME-046
• Anduritüüp: Aktiivne andur
• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info 2: koos kaabliga
• paaris tootenumbrid: HCA-ME-047
• Manufacturer: NTY

• Length [mm]: 730
• Fitting Position: Front Axle Left
• Manufacturer: KAMOKA

• Length [mm]: 730
• Fitting Position: Front Axle Right
• Manufacturer: KAMOKA

• Installatsiooni pool: esisild vasakul
• Pistikkontaktide arv: 2
• Anduritüüp: Aktiivne andur
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle Left
• Model Year to: 2012
• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info 2: koos kaabliga
• pikkus üle kõige (mm): 725
• temperatuurivahemik alates [°C]: −40
• Temperatuurivahemik kuni [°C]: 150
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: BOS

• Installatsiooni pool: Tagasild
• Seerianumber: HCA-ME-039
• Manufacturer: NTY

• Fitting Position: Front Axle Right
• Model Year to: 2012
• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info 2: koos kaabliga
• pikkus üle kõige (mm): 725
• temperatuurivahemik alates [°C]: −40
• Temperatuurivahemik kuni [°C]: 150
• Manufacturer: BOSCH
• Lisainfo: 0265008133 BOSCH
• Additional information: 0265008133 BOSCH

• Installatsiooni pool: Tagasild mõlemapoolselt
• Kaal (kg): 0,035
• pakendi pikkus [cm]: 8,4
• pakendi laius [cm]: 8,4
• pakendi kõrgus [cm]: 1
• Manufacturer: FEBEST

• for special equipment code: 804, 805, 806, 807, 808
• not for special equipment code: M005
• Sensor Type: Active sensor
• Cable Length [mm]: 703
• Number of pins: 2
• Fitting Position: Front Axle Left
• paired article number: 014 899 0075
• Name: Andur, rattap””rete arv
• Manufacturer: MEY

• Fitting Position: Front Axle Right
• Sensor Type: Active sensor
• Length [mm]: 680
• Socket colour: black

• Fitting Position: Front Axle Left
• Sensor Type: Active sensor
• Length [mm]: 680
• Socket colour: black

• Length [mm]: 724
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: KAMOKA

• Fitting Position: Front Axle both sides
• Siseläbimõõt [mm]: 51,7
• Laius (mm): 10,2
• Välisläbimõõt [mm]: 73,2
• Piirangutega toode/piirangu info 2: koos integreeritud magnetilise anduriga
• Pistikkontaktide arv: 96
• Name: ANDUR,ABS
• Manufacturer: TRI
• Lisainfo: MERCEDES
• Additional information: MERCEDES

• Fitting Position: Front Axle
• Siseläbimõõt [mm]: 46,5
• Laius (mm): 9,5
• Välisläbimõõt [mm]: 68,1
• Piirangutega toode/piirangu info 2: koos integreeritud magnetilise anduriga
• Pistikkontaktide arv: 96
• Name: ANDUR,ABS
• Manufacturer: TRI

• for special equipment code: 800, 801, 802, 803
• Fitting Position: Rear Axle Left, Rear Axle Right
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Length [mm]: 730
• Braking/Driving Dynamics: for vehicles with ABS
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Sensor Type: Active sensor
• Length [mm]: 720
• Socket colour: black
• Manufacturer: JP GROUP

• Fitting Position: Front Axle Right
• Model Year to: 2012
• Cable Length [mm]: 673
• Sensor Type: Active sensor
• Manufacturer: OPTIMAL ZAWIESZENIE

• Installatsiooni pool: Tagasild
• Kaablipikkus (mm): 725
• Pistikkontaktide arv: 2
• Anduritüüp: Aktiivne andur
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for special equipment code: 800/801, 802/803
• Fitting Position: Rear Axle
• Length [mm]: 724
• for OE number: 212 540 21 17
• Number of pins: 2
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

• Model Year to: 2012
• Fitting Position: Front Axle Left
• Cable Length [mm]: 673
• Sensor Type: Active sensor
• Manufacturer: OPTIMAL ZAWIESZENIE

• for OE number: 212 540 2117
• Fitting Position: Rear Axle both sides
• Manufacturer: TRUCKTEC

• Required quantity: 2
• for special equipment code: 804, 805, 806, 807, 808
• Vehicle type: E500
• Installatsiooni pool: Tagasild
• Kaablipikkus (mm): 680
• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 2
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: HELLA
• Name: HE 6PU358218091

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Front Axle Right
• Model Year to: 2012
• Kaablipikkus (mm): 673
• Anduritüüp: Aktiivne andur
• Installatsiooni sügavus (mm): 36
• Ühenduste arv: 2
• Manufacturer: ERA

• Fitting Position: Front Axle Left
• Model Year to: 2012
• Cable Length [mm]: 716
• Sensor Type: Hall Sensor
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Manufacturer: FAE ELEKTRYKA

• Required quantity: 2
• Fitting Position: Rear Axle
• Piirangutega toode/piirangu info 2: koos kaabliga
• Manufacturer: BREMI

• Installatsiooni pool: esisild vasakul
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Nominaalpinge (V): 12
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 645
• Name: Andur, rattap””rete arv
• Manufacturer: DLP

• Required quantity: 1
• Fitting Position: Front Axle Right
• Piirangutega toode/piirangu info 2: koos kaabliga
• Manufacturer: BREMI

• for special equipment code: 804, 805, 806, 807, 808
• Sensor Type: Active sensor
• Cable Length [mm]: 685
• Number of pins: 2
• Fitting Position: Rear Axle
• Name: CZUJNIK ABS T. DB E, CLS 09- LE/PR
• Manufacturer: MEY

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Kaablipikkus (mm): 685
• Anduritüüp: Aktiivne andur
• Pistikkontaktide arv: 2
• Manufacturer: ERA

• not for special equipment code: 800, 801, 802, 803
• Sensor Type: Active sensor
• Cable Length [mm]: 703
• Number of pins: 2
• Fitting Position: Front Axle Right
• Name: CZUJNIK ABS DB P. E, CLS 09- PR
• Manufacturer: MEY

• Required quantity: 2
• for special equipment code: 800, 801, 802, 803
• Vehicle type: E500
• Pinge [V]: 12
• Installatsiooni pool: Tagasild
• Kaablipikkus (mm): 655
• Pistikkontaktide arv: 2
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: HELLA
• Name: HE 6PU010039931

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• paired article number: 106263
• Length [mm]: 730
• Number of connectors: 2
• Fitting Position: Front Axle Right
• Weight [kg]: 0.044
• Name: Andur, rattap””rete arv
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left
• pikkus üle kõige (mm): 770
• Pikkus (mm): 36
• Anduritüüp: Aktiivne andur
• Pistiku värv: must
• Kaablipikkus (mm): 675
• paaris tootenumbrid: 31405
• Kaal (kg): 0,09
• Manufacturer: ABS

• paired article number: 10 10 6280
• Length [mm]: 730
• Number of connectors: 2
• Fitting Position: Front Axle Left
• Weight [kg]: 0.044
• Name: SW 10 10 6263
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 10 10 6263
• Length [mm]: 730
• Number of connectors: 2
• Fitting Position: Front Axle Right
• Weight [kg]: 0.044
• Name: SW 10 10 6280
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: esisild vasakul
• Pistikkontaktide arv: 2
• Kaablipikkus (mm): 670
• pikkus üle kõige (mm): 740
• Anduritüüp: Aktiivne andur
• Installatsiooni sügavus (mm): 36
• OE-numbri jaoks: A2129050200
• Manufacturer: MEAT&DORIA

• Installatsiooni pool: esisild paremal
• Pistikkontaktide arv: 2
• Kaablipikkus (mm): 670
• pikkus üle kõige (mm): 740
• Anduritüüp: Aktiivne andur
• Installatsiooni sügavus (mm): 36
• OE-numbri jaoks: A2129050300
• Manufacturer: MEAT&DORIA

• Fitting Position: Rear Axle
• Sensor Type: Active sensor
• Overall Length [mm]: 722
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Cable Length [mm]: 716
• Manufacturer: SNR

• Fitting Position: Rear Axle
• Cable Length [mm]: 645
• Sensor Type: Active sensor
• Manufacturer: OPTIMAL ZAWIESZENIE

• for special equipment code: 800/801, 802/803
• Length [mm]: 724
• Number of connectors: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.04
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left
• Required quantity: 1
• for special equipment code: 804, 805, 806, 807, 808
• Vehicle type: E500
• Kaablipikkus (mm): 722
• Anduritüüp: Aktiivne andur
• Pistikkontaktide arv: 2
• Installatsiooni pool: Esisild
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: HELLA ELEKTRYKA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Front Axle Left
• Construction Year from: 01.2013
• Length [mm]: 722
• Sensor Type: Active sensor
• Packaging length [cm]: 13
• Packaging width [cm]: 13
• Packaging height [cm]: 3.8
• Weight [kg]: 0.044
• Name: CZUJNIK ABS DB P. CLS (C218) LE 1,8-6,2 09-
• Manufacturer: TEX

• Fitting Position: Front Axle Left
• special equipment code from: 804
• Pikkus (mm): 722
• paaris tootenumbrid: 24.0710-2137.3
• MAPP-code olemas:
• Manufacturer: ATE

• Fitting Position: Front Axle Right
• special equipment code from: 804
• Pikkus (mm): 722
• paaris tootenumbrid: 24.0710-2136.3
• MAPP-code olemas:
• Manufacturer: ATE

• Fitting Position: Front Axle Right
• Construction Year from: 01.2013
• Length [mm]: 722
• Sensor Type: Active sensor
• Packaging length [cm]: 13
• Packaging width [cm]: 13
• Packaging height [cm]: 3.8
• Weight [kg]: 0.044
• Name: CZUJNIK ABS DB P. CLS (C218) PR 1,8-6,2 09-
• Manufacturer: TEX

• Fitting Position: Rear Axle
• Required quantity: 2
• for special equipment code: 802/803/804
• Pikkus (mm): 722
• MAPP-code olemas:
• Manufacturer: ATE

• Fitting Position: Rear Axle
• Model Year to: 2012
• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info 2: koos kaabliga
• pikkus üle kõige (mm): 673
• temperatuurivahemik alates [°C]: −40
• Temperatuurivahemik kuni [°C]: 150
• Name: Andur, rattap””rete arv
• Manufacturer: BOS

• Fitting Position: Front Axle Left
• Special equipment code up to: 803
• Pikkus (mm): 720
• paaris tootenumbrid: 24.0710-2090.3
• MAPP-code olemas:
• Manufacturer: ATE

• Fitting Position: Front Axle Right
• Special equipment code up to: 803
• Pikkus (mm): 720
• paaris tootenumbrid: 24.0710-2089.3
• MAPP-code olemas:
• Manufacturer: ATE

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Hammastehulk ABS-rõngas: 96
• Pistikukatte kuju: ovaalne
• Piirangutega toode/piirangu info 2: koos ABS-andurirõngaga
• Hulgaühik: Komplekt
• Pistikkontaktide arv: 2
• Pikkus (mm): 724
• Nominaalpinge (V): 12
• Anduritüüp: Induktiivandur
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• special equipment code from: 804
• paired article number: 170682
• Number of connectors: 2
• Fitting Position: Front Axle Left
• Cable Length [mm]: 676
• Weight [kg]: 0.044
• Name: Andur, rattap””rete arv
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• special equipment code from: 804
• paired article number: 170693
• Number of connectors: 2
• Fitting Position: Front Axle Right
• Cable Length [mm]: 671
• Weight [kg]: 0.044
• Name: Andur, rattap””rete arv
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Cable Length [mm]: 647
• Weight [kg]: 0.041
• Name: Andur, rattap””rete arv
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Right
• for special equipment code: 800, 801, 802, 803
• Length [mm]: 720
• Sensor Type: Active sensor
• paired article number: GBS2669
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left
• for special equipment code: 800, 801, 802, 803
• Length [mm]: 720
• Sensor Type: Active sensor
• paired article number: GBS2670
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Required quantity: 2
• for special equipment code: 804/805/806/807/808
• Pikkus (mm): 724
• MAPP-code olemas:
• Manufacturer: ATE
• Lisainfo: 24.0710-2138.3
• Additional information: 24.0710-2138.3

• Fitting Position: Rear Axle
• not for special equipment code: 800,801,802,803
• Manufacturer: METZGER