• Number of pins: 2
• Fitted Diameter [mm]: 9
• Supplementary Article/Info 2: with seal ring
• for OE number: K05175764AA
• Manufacturer: KAMOKA

Manufacturer: FAST

• Sensor Type: Passive sensor
• for OE number: 51271207038
• Manufacturer: KAMOKA

• Sensor Type: Passive sensor
• for OE number: 9118368
• Manufacturer: KAMOKA

• Sensor Type: NTC Sensor
• Number of pins: 2
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Thread Size: 9 mm
• Number of connectors: 2
• Manufacturer: VERNET

• Housing Colour: black
• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE TS10531

• Width [mm]: 30
• Thickness [mm]: 50
• Outer Diameter [mm]: 18, 9
• Number of connectors: 2
• Weight [kg]: 0.01
• for OE number: 000 905 61 02
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: M 276.952
• for article number: 1.880.776, 1.880.875
• Name: EP 1.830.343
• Manufacturer: EPS

• Width [mm]: 30
• Thickness [mm]: 50
• Outer Diameter [mm]: 18, 9
• Number of connectors: 2
• Weight [kg]: 0.01
• Supplementary Article/Info 2: with seal ring
• for OE number: 000 905 61 02
• Manufacturer: SWAG
• Name: SW 10 94 5443

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Mounting Type: Clamped
• Name: HE 6PT358058191
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• Supplementary Article/Info 2: with bracket
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Block Separation:
• Country Specific Design: USA, Canada
• Vehicle Equipment: for vehicles with start-stop function
• Number of pins: 2
• Operating Mode: Mechanical
• Assy./disassy. by qualified personnel required!:
• Name: HE 6DD010966431
• Manufacturer: HELLA

Transmission Type: not for 7-speed automatic transmission, not for 9-speed automatic transmission, not for 5-speed automatic transmission

• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Sensor Type: NTC Sensor
• Supplementary Article/Supplementary Info: with retaining spring
• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Manufacturer: MEYLE

• Fabrication Number: ECP-ME-008
• Manufacturer: NTY

• Fabrication Number: ECP-ME-006
• Number of pins: 3
• Manufacturer: NTY

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: not have
• Thread Size: not have
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Number of pins: 3
• Name: DE SS12020-12B1
• Manufacturer: DELPHI

• Number of pins: 3
• Fabrication Number: ECP-ME-010

• Connector Shape: rectangular
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU009168771
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Transmission Type: Manual Transmission
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: without cable
• Alternative Repair Kit: 550328
• Manufacturer: ERA

Transmission ID: .604-.608, .620-.624, .626-.628, .630, .631, .633-.638, .640, .641, .643, .644, .646-.649, .651-.655, .657-.658, .660, .662-.664, .667-.671, 716.601,.603

Manufacturer: FAST

• Transmission Type: Manual Transmission
• Length [mm]: 24
• Number of connectors: 3
• Weight [kg]: 0.029
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

Transmission ID: .604-.608, .620-.624, .626-.628, .630, .631, .633-.638, .640, .641, .643, .644, .646-.649, .651-.655, .657-.658, .660, .662-.664, .667-.671, 716.601,.603 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 3
• Weight [kg]: 0.018
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Resistor [Ohm]: 3.5
• Length [mm]: 301
• Conductor Number: 4
• Number of circuits: 4
• Cable Length [mm]: 301
• Lambda Sensor: Heated
• Name: MM OSM142
• Manufacturer: MAGNETI MARELLI

• Lambda Sensor: Diagnostic Probe
• Engine Code: M 276.952
• Voltage [V]: 12
• Length [mm]: 300
• Number of circuits: 4
• Weight [kg]: 0.99
• Operating Mode: Electric
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV064
• Manufacturer: ESEN SKV

• Engine Code: M 276.952
• for SA code: 920
• Fitting Position: Right Front, after catalytic converter
• Cable Length [mm]: 300
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.997.007
• Number of circuits: 4
• Name: EP 1.998.175
• Manufacturer: EPS

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Engine Code: M 276.952
• Fitting Position: Left
• for OE number: A 008 542 70 18
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 500
• Number of pins: 4
• Weight [g]: 94
• Gross Weight [g]: 124

Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Lambda Sensor

• Fitting Position: Left, Right, Front, after catalytic converter
• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• not for SA code: 920
• Cable Length [mm]: 650
• Name: DE ES21151-12B1
• Manufacturer: DELPHI

• Voltage [V]: 12
• Fabrication Number: EPP-ME-020
• Manufacturer: NTY

• Lambda Sensor: Broadband lambda sensor
• Number of pins: 5
• Cable Length [mm]: 570
• for OE number: 7 569 930
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Engine Code: M 276.952
• Fitting Position: Right
• for OE number: A 008 542 61 18
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 300
• Number of pins: 4
• Weight [g]: 87
• Gross Weight [g]: 117
• Manufacturer: DENSO

Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Lambda Sensor

• Lambda Sensor: Broadband lambda sensor
• Number of pins: 5
• Cable Length [mm]: 410
• for article number: 81577E
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Length [mm]: 500
• Number of pins: 6
• Manufacturer: FAE

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Colour: red
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Component Number: 920
• for OE number: 000 542 87 11
• Number of circuits: 5
• Overall Length [mm]: 350
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH

• Fitting Position: Left, Right, Front, before catalytic converter
• for model year: 2012
• Lambda Sensor: Regulating Probe, Broadband lambda sensor, Heated
• for SA code: 920
• not for SA code: K01
• Cable Length [mm]: 320
• Name: DE ES20551-12B1
• Manufacturer: DELPHI

• Engine Code: M 276.952
• for SA code: K01
• not for SA code: 920
• for model year: 2012
• Fitting Position: Left, Right, Front, before catalytic converter
• Cable Length [mm]: 570
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.472
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased

• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe, Heated
• Model Year to: 2016
• for SA code: 920
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 5
• Cable Length [mm]: 406
• Weight [kg]: 0.097
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Lambda Sensor
• Cable Length [mm]: 330
• Number of pins: 6
• Number of circuits: 5
• Manufacturer: ERA

• Fitting Position: Left, Right, Front, before catalytic converter
• for model year: 2012
• Lambda Sensor: Regulating Probe, Broadband lambda sensor
• for SA code: 920
• not for SA code: K01
• Cable Length [mm]: 400
• Number of pins: 6
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PA009166801
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: M 276.952
• for SA code: 920/K01
• Fitting Position: Left, Right, Front, before catalytic converter
• Cable Length [mm]: 350
• Conductor Number: 5
• Number of circuits: 5
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• not for Component Number: 920
• for OE number: 009 542 59 18
• Number of circuits: 5
• Overall Length [mm]: 520
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.15
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Manufacturer: ESEN SKV

• Fitting Position: Left, Right, Front, before catalytic converter
• for model year: 2012
• Lambda Sensor: Regulating Probe, Broadband lambda sensor, Heated
• for SA code: 920
• not for SA code: K01
• Cable Length [mm]: 541
• Name: DE ES20552-12B1
• Manufacturer: DELPHI

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Length [mm]: 400
• Number of pins: 6
• Manufacturer: FAE

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• not for Component Number: 920
• for OE number: 008 542 29 18
• Number of circuits: 5
• Overall Length [mm]: 532
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH

• Construction Year to: 02.2013
• Engine Code: 276.952
• Fitting Position: before catalytic converter
• Number of pins: 6
• Cable Length [mm]: 350
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Weight [kg]: 0.14
• Name: VA 368396
• Manufacturer: VALEO

Lambda Sensor: Planar probe, Broadband lambda sensor, Thread pre-greased, Heated

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Component Number: 920
• for OE number: 003 542 69 18
• Number of circuits: 5
• Overall Length [mm]: 350
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH
• Name: BS 0258017014

• Lambda Sensor: Broadband lambda sensor
• Number of pins: 5
• Cable Length [mm]: 410
• for article number: 81577
• for OE number: 13627791592
• Manufacturer: MEAT&DORIA

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: oval
• Number of pins: 2
• Socket colour: black
• for OE number: 5175764AA