Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Vehicle Equipment: for vehicles without AMG sports package
- Suspension: for vehicles without sports suspension
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom eye -
Shock Absorber System: Twin-
Tube - Shock Absorber Design: Suspension Strut
- Lisainfo: Shock Absorber
- Additional information: Shock Absorber
- Quantity per packing unit: 2
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom Yoke - Diameter [mm]: 58
- Length 1 [mm]: 515
- Length 2 [mm]: 359
- Piston Rod Diameter [mm]: 25
- Manufacturer: TRW AMORTYZATORY
- Additional information: TRWJGM1122T
- Lisainfo: TRWJGM1122T
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Height [mm]: 224
- Manufacturer: OPTIMAL ZAWIESZENIE
Braking/Driving Dynamics: for vehicles without electronic drive dynamics control
- Braking/Driving Dynamics: for vehicles without Airmatic DC
- Thickness [mm]: 224
- Inner Diameter [mm]: 68
- Fitting Position: Front Axle
- Inner Diameter 1 [mm]: 88
- Weight [kg]: 0.09
- Manufacturer: FEBI
- Additional information: FE40088
- Lisainfo: FE40088
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Braking/Driving Dynamics: for vehicles without Airmatic DC
- Quantity per packing unit: 2
- Fitting Position: Front Axle
- Length [mm]: 224
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Top pin,
Bottom eye - Manufacturer: GSP AMORTYZATOR
Suspension: for vehicles with standard suspension, for vehicles with bad road version, for vehicles with increased ground clearance, for vehicles without sports suspension Vehicle Equipment: for vehicles with level control, for vehicles without AMG sports package
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Bottom eye,
Top pin - Shock Absorber Design: Suspension Strut
- Name: CFD 562305
- Manufacturer: DACO
Vehicle Equipment: for vehicles without AMG sports package, for vehicles with level control Suspension: for vehicles with standard suspension, for vehicles with increased ground clearance, for vehicles without sports suspension, for vehicles with bad road version
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom eye -
Shock Absorber System: Twin-
Tube - Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
Vehicle Equipment: for vehicles with level control, for vehicles without AMG sports package Suspension: for vehicles with standard suspension, for vehicles with bad road version, for vehicles with increased ground clearance, for vehicles without sports suspension General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber Mounting Type: Top pin,
Bottom eye -
Shock Absorber System: Twin-
Tube - Manufacturer: DENCKERMANN AMORTYZATORY
Vehicle Equipment: for vehicles with level control, for vehicles without AMG sports package Suspension: for vehicles with standard suspension, for vehicles with bad road version, for vehicles with increased ground clearance, for vehicles without sports suspension
- Fitting Position: Rear Axle
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Telescopic Shock Absorber
-
Manufacturer: ASHIKA-
AMORTYZATORY
Vehicle Equipment: for vehicles with level control, for vehicles without AMG sports package Suspension: for vehicles with standard suspension, for vehicles with bad road version, for vehicles with increased ground clearance, for vehicles without sports suspension
- Fitting Position: Rear Axle
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Telescopic Shock Absorber
- Name: BM SA0772
- Manufacturer: BREMSI
- Fitting Position: Rear Axle
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Telescopic Shock Absorber
- Manufacturer: JAPKO
Vehicle Equipment: for vehicles with level control, for vehicles without AMG sports package Suspension: for vehicles with standard suspension, for vehicles with bad road version, for vehicles with increased ground clearance, for vehicles without sports suspension
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube -
Shock Absorber Mounting Type: Bottom eye,
Top pin - Manufacturer: KAVO PARTS
Suspension: for vehicles with standard suspension, for vehicles with bad road version, for vehicles with increased ground clearance, for vehicles without sports suspension Vehicle Equipment: for vehicles with level control, for vehicles without AMG sports package
- Quantity per packing unit: 2
- Fitting Position: Rear Axle
- Diameter [mm]: 45
- Standpipe Diameter [mm]: 12.5
- Length 1 [mm]: 440
- Length 2 [mm]: 292
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Telescopic Shock Absorber
-
Shock Absorber System: Twin-
Tube - Shock Absorber Mounting Type: Bottom eye
- Manufacturer: TRW AMORTYZATORY
- Additional information: TRWJGS1276T
- Lisainfo: TRWJGS1276T
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Rear Axle
-
Shock Absorber System: Twin-
Tube - Shock Absorber Type: Gas Pressure
-
Shock Absorber Mounting Type: Top pin,
Bottom eye - Shock Absorber Design: Telescopic Shock Absorber
- Manufacturer: KYB
- Name: KY 349138
Suspension: for vehicles with standard suspension, for vehicles with bad road version, for vehicles with increased ground clearance, for vehicles without sports suspension Vehicle Equipment: for vehicles with level control, for vehicles without AMG sports package
- Braking/Driving Dynamics: for vehicles without Airmatic DC
- Suspension: for vehicles with standard suspension
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Absorber does not carry a spring
-
Shock Absorber Mounting Type: Bottom eye,
Top pin - Shock Absorber System: Monotube
- Manufacturer: BILSTEIN
- Name: Gas shock absorber
- Quality class: Q
Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
- Braking/Driving Dynamics: for vehicles without Airmatic DC
- Suspension: for vehicles with standard suspension
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp -
Shock Absorber System: Twin-
Tube - Manufacturer: BILSTEIN
-
Name: BI 22-
197665 - Quality class: Q
Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
- Braking/Driving Dynamics: for vehicles without Airmatic DC
- Suspension: for vehicles with standard suspension
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
-
Shock Absorber Mounting Type: Top pin,
Bottom Clamp -
Shock Absorber System: Twin-
Tube -
Name: BI 22-
309822 - Manufacturer: BILSTEIN
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks