• Length [mm]: 102
• Manufacturer: JP GROUP
• Lisainfo: Sensor, brake lining wear, front
• Additional information: Sensor, brake lining wear, front

Lisainfo: Sensor, brake lining wear, front

• Fitting Position: Rear Axle
• Brake System: ATE

• Brake System: ATE
• Brake Type: Disc Brake
• Length [mm]: 97
• Fitting Position: Rear Axle
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MAX
• Lisainfo: 2115401717/MG
• Additional information: 2115401717/MG

• Required quantity: 1
• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 100
• Number of wear indicators [per axle]: 2
• Net weight [kg]: 0.01
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: NK

• Fitting Position: Rear Axle, Front Axle
• Brake Type: Disc Brake
• Warning Contact Length [mm]: 92
• Weight [kg]: 0.005
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Brake System: Brembo, TRW
• Length [mm]: 97
• Supplementary Article/Supplementary Info: Axle Kit
• Manufacturer: QUICK BRAKE

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 95
• Weight [kg]: 0.03
• Number of wear indicators [per axle]: 1
• Manufacturer: A.B.S.

• Brake Type: Disc Brake
• Fitting Position: Front Axle, Rear Axle
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: MAX
• Lisainfo: 20-0334
• Additional information: 20-0334

• Fitting Position: Rear Axle, Front Axle
• Length [mm]: 94
• Brake Type: Disc Brake
• Weight [kg]: 0.004
• Name: SW 10 91 9186
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Brake System: ATE
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: MAX

• Fitting Position: both sides
• Brake Type: Disc Brake
• Weight [kg]: 0.02
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV560
• Manufacturer: ESEN SKV

• Fitting Position: Rear Axle, Front Axle
• paired article number: 23857
• Length [mm]: 94
• Brake Type: Disc Brake
• Weight [kg]: 0.004
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Rear Axle
• Brake Type: Disc Brake
• Warning Contact Length [mm]: 95
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MEY

• Fitting Position: Front Axle, Rear Axle
• Block Separation:
• Length [mm]: 95
• Brake Type: Disc Brake
• Manufacturer: BOSCH

• Brake Type: Disc Brake
• Fitting Position: Rear Axle, Front Axle
• Alternatively:
• Warning Contact Length [mm]: 97
• Weight [kg]: 0.005
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle, Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 95
• Number of wear indicators [per axle]: 1
• Manufacturer: BREMBO
• Name: BR A 00 377

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 95
• Packaging length [cm]: 18.5
• Packaging width [cm]: 1
• Packaging height [cm]: 1.2
• Weight [kg]: 0.013
• Manufacturer: MINTEX

• Fitting Position: Rear Axle, Front Axle
• Required quantity: 1
• Block Separation:
• Brake Type: Disc Brake
• Length 1 [mm]: 55
• Warning Contact Length [mm]: 100
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Rear Axle
• Brake System: ATE
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-2688A

• Fitting Position: Front Axle
• Brake System: TRW

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Length [mm]: 12.5
• Thread Size: M8x1
• Material: Steel
• Surface: Chrome-(VI)- free passivation
• Bolt Head-/Nut Design: Female Torx
• Available as universal article as well, see article no.: TPM1000
• Weight [kg]: 0.003
• Name: Kruvi,piduriketas
• Manufacturer: TEX

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Type: Disc Brake
• Length [mm]: 100
• Number of wear indicators [per axle]: 2
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: TRW
• Quality class: Q

SVHC: No information available, please contact the manufacturer!

• Required quantity: 1
• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 97.5
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: ATE

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Brake System: Brembo, TRW
• Length [mm]: 97
• Supplementary Article/Supplementary Info: Axle Kit
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: TRI

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 95
• Packaging length [cm]: 20
• Packaging width [cm]: 12
• Packaging height [cm]: 1
• Weight [kg]: 0.004
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: TEX

• Fitting Position: Front Axle
• Brake System: BREMBO

• Fitting Position: Rear Axle
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Type: Disc Brake
• Length [mm]: 102
• Length 2 [mm]: 110
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Type: Disc Brake
• Length [mm]: 95
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Brake System: ATE
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Length [mm]: 100
• Brake Type: Disc Brake
• Number of wear indicators [per axle]: 1
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Brake System: AKEBONO
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-2888A

• Fitting Position: Rear Axle
• Brake System: TRW
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: QBK

• Fitting Position: Front Axle
• Brake System: Brembo, TRW
• Length 1 [mm]: 97
• Brake Type: Disc Brake
• Name: DE LZ0363
• Manufacturer: DELPHI

• Fitting Position: Front Axle
• Brake System: Brembo
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK
• Additional information: QB109-1786
• Lisainfo: QB109-1786

• Fitting Position: Front Axle Right
• Fabrication Number: HCA-ME-047

• Fitting Position: Rear Axle
• Fabrication Number: HCA-ME-039
• Manufacturer: NTY

• Fitting Position: Front Axle
• Brake System: TRW
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK

• Fitting Position: Rear Axle
• Sensor Type: Active sensor
• Number of pins: 2
• Cable Length [mm]: 725
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• for SA code: 802, 803, 804
• Sensor Type: Active sensor
• Cable Length [mm]: 703
• Number of pins: 2
• Fitting Position: Front Axle Left
• paired article number: 014 899 0075
• Name: Andur, rattap””rete arv
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Manufacturer Restriction: ATE
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Right
• Sensor Type: Active sensor
• Length [mm]: 680
• Socket colour: black

• Fitting Position: Front Axle Left
• Sensor Type: Active sensor
• Length [mm]: 680
• Socket colour: black

• Fitting Position: Rear Axle Left, Rear Axle Right
• Length [mm]: 724
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle Left, Rear Axle Right
• Sensor Type: Active sensor
• Length [mm]: 720
• Socket colour: black
• Manufacturer: JP GROUP

• Fitting Position: Rear Axle Left
• Material: Sheet Steel
• Manufacturer: KAMOKA

• for SA code: 802/803, 804
• Fitting Position: Rear Axle
• Length [mm]: 724
• for OE number: 212 540 21 17
• Number of pins: 2
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

• Fitting Position: Front Axle Left
• Length [mm]: 730
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Right
• Length [mm]: 730
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle
• Brake System: ATE
• Manufacturer: BOSCH

• Fitting Position: Rear Axle, Left
• Material: Sheet Steel
• Name: CFD 612325
• Manufacturer: DACO

• Fitting Position: Rear Axle, Right
• Material: Sheet Steel
• Name: CFD 612326
• Manufacturer: DACO

• Fitting Position: Rear Axle
• Required quantity: 2
• for SA code: 805, 806, 807
• Cable Length [mm]: 680
• Sensor Type: Hall Sensor
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU358218091

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Front Axle
• Brake System: Brembo
• Manufacturer: BOSCH

• Fitting Position: Rear Axle Left
• Weight [kg]: 0.6
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 57SKV623

• Fitting Position: Rear Axle Right
• Weight [kg]: 0.61
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 57SKV624

• for OE number: 212 540 2117
• Fitting Position: Rear Axle both sides
• Manufacturer: TRUCKTEC

• Fitting Position: Front Axle Right
• Overall Length [mm]: 720
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 670
• paired article number: 32127
• Weight [kg]: 0.04
• Manufacturer: A.B.S.

• paired article number: 175123
• Fitting Position: Rear Axle Right
• Weight [kg]: 0.531
• Name: Plekk,piduriketas
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for SA code: 802, 803, 804
• Required quantity: 2
• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Fitting Position: Rear Axle
• Overall Length [mm]: 730
• Length [mm]: 31
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 660
• paired article number: 32114
• Weight [kg]: 0.08
• Manufacturer: A.B.S.

• for SA code: 802, 803, 804
• Required quantity: 1
• Fitting Position: Front Axle Right
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Fitting Position: Rear Axle
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 645
• Name: Andur, rattap””rete arv
• Manufacturer: DLP

• Fitting Position: Front Axle Left
• Overall Length [mm]: 720
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 670
• paired article number: 32128
• Weight [kg]: 0.04
• Manufacturer: A.B.S.

• paired article number: 33 10 6595
• Fitting Position: Rear Axle Left
• Weight [kg]: 0.531
• Name: SW 33 10 6596
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 33 10 6596
• Fitting Position: Rear Axle Right
• Weight [kg]: 0.531
• Name: SW 33 10 6595
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Cable Length [mm]: 685
• Sensor Type: Active sensor
• Number of pins: 2
• Manufacturer: ERA

• Fitting Position: Rear Axle Left
• Material: Sheet Steel
• paired article number: 11334
• Weight [kg]: 0.7
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle Right
• Material: Sheet Steel
• paired article number: 11333
• Weight [kg]: 0.7
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle
• Overall Length [mm]: 710
• Length [mm]: 31
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 640
• paired article number: 31194
• Weight [kg]: 0.1
• Manufacturer: A.B.S.

• for OE number: 212 420 2244
• Fitting Position: Rear Axle Right
• Name: Plekk,piduriketas
• Manufacturer: TRU

• Fitting Position: Front Axle Right
• Cable Length [mm]: 673
• Sensor Type: Active sensor
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Front Axle Right
• Overall Length [mm]: 770
• Length [mm]: 36
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 675
• paired article number: 31471
• Weight [kg]: 0.08
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle Left
• Surface: Stoved Enamel, Zinc-coated
• Material: Sheet Steel
• paired article number: V30-3240
• Weight [kg]: 0.517
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle Left
• Cable Length [mm]: 673
• Sensor Type: Active sensor
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Rear Axle Left
• paired article number: 6115012
• Material: Sheet Steel
• Surface: Cathodic Painting
• Manufacturer: METZGER

• Fitting Position: Rear Axle Right
• paired article number: 6115011
• Material: Sheet Steel
• Surface: Cathodic Painting
• Manufacturer: METZGER

• Fitting Position: Front Axle Left
• Overall Length [mm]: 770
• Length [mm]: 36
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 675
• paired article number: 31405
• Weight [kg]: 0.09
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle Left
• Material: Sheet Steel
• Surface: Cathodic Painting, Zinc-coated
• paired article number: 55102
• Diameter 1/ Diameter 2 [mm]: 130 / 360
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle Right
• Material: Sheet Steel
• Surface: Cathodic Painting, Zinc-coated
• paired article number: 55101
• Diameter 1/ Diameter 2 [mm]: 130 / 360
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• paired article number: 10 10 6263
• Length [mm]: 730
• Number of connectors: 2
• Fitting Position: Front Axle Right
• Weight [kg]: 0.044
• Name: SW 10 10 6280
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 10 10 6280
• Length [mm]: 730
• Number of connectors: 2
• Fitting Position: Front Axle Left
• Weight [kg]: 0.044
• Name: SW 10 10 6263
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Right
• Number of pins: 2
• Cable Length [mm]: 670
• Overall Length [mm]: 740
• Sensor Type: Active sensor
• Fitting Depth [mm]: 36
• for OE number: A 212 905 03 00
• for article number: 90899
• Manufacturer: MEAT&DORIA

• paired article number: 106263
• Length [mm]: 730
• Number of connectors: 2
• Fitting Position: Front Axle Right
• Weight [kg]: 0.044
• Name: Andur, rattap””rete arv
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for SA code: 802/803, 804
• Length [mm]: 724
• Number of connectors: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.04
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Cable Length [mm]: 716
• Manufacturer: SNR

• Fitting Position: Front Axle Left
• Length [mm]: 722
• Sensor Type: Active sensor
• Packaging length [cm]: 13
• Packaging width [cm]: 13
• Packaging height [cm]: 3.8
• Weight [kg]: 0.044
• Name: CZUJNIK ABS DB P. CLS (C218) LE 1,8-6,2 09-
• Manufacturer: TEX

• Fitting Position: Front Axle Right
• Length [mm]: 722
• Sensor Type: Active sensor
• Packaging length [cm]: 13
• Packaging width [cm]: 13
• Packaging height [cm]: 3.8
• Weight [kg]: 0.044
• Name: CZUJNIK ABS DB P. CLS (C218) PR 1,8-6,2 09-
• Manufacturer: TEX

• Fitting Position: Rear Axle
• Required quantity: 2
• for SA code: 802, 803, 804
• Voltage [V]: 12
• Cable Length [mm]: 655
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU010039931

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Rear Axle
• Required quantity: 2
• for SA code: 802/803/804
• Length [mm]: 722
• MAPP code available:
• Manufacturer: ATE

• Fitting Position: Front Axle Right
• for SA code: 805
• Length [mm]: 722
• Sensor Type: Active sensor
• paired article number: GBS2690
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left
• for SA code: 805
• Length [mm]: 722
• Sensor Type: Active sensor
• paired article number: GBS2691
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• SA code from: 805
• paired article number: 170682
• Number of connectors: 2
• Fitting Position: Front Axle Left
• Cable Length [mm]: 676
• Weight [kg]: 0.044
• Name: Andur, rattap””rete arv
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Cable Length [mm]: 647
• Weight [kg]: 0.041
• Name: Andur, rattap””rete arv
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• SA code from: 805
• paired article number: 170693
• Number of connectors: 2
• Fitting Position: Front Axle Right
• Cable Length [mm]: 671
• Weight [kg]: 0.044
• Name: Andur, rattap””rete arv
• Manufacturer: FEB