• Filter type: Pre-Filter, Filter Insert
• Supplementary Article/Supplementary Info: with gasket/seal
• Height [mm]: 41
• Outer Diameter [mm]: 47
• Outer Diameter 1 [mm]: 50
• SVHC: No SVHC present!
• Name: KšTUSEFILTER
• Manufacturer: MAN

• Filtritüüp: Filtrer
• Manufacturer: DRIVE

• Filter type: Filter Insert
• Height [mm]: 104
• Outer Diameter [mm]: 92
• Inner Diameter 1 [mm]: 12
• Inner Diameter 2 [mm]: 27
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Filter type: Filter Insert
• Diameter [mm]: 92.2
• Height [mm]: 102.5
• Inner Diameter 2 [mm]: 27
• Packaging height [cm]: 12
• Net Weight [g]: 156
• Packaging length [cm]: 9.5
• Packaging width [cm]: 9.5
• Manufacturer: MAHLE KNECHT

• Engine Code: OM 904.923
• Construction Year from: 10.1998
• Construction Year to: 01.2001
• Filter type: Filter Insert
• Diameter [mm]: 92.2
• Inner Diameter 1 [mm]: 26.6
• Inner Diameter 2 [mm]: 44
• Height [mm]: 102.5
• Name: KšTUSEFILTER
• Manufacturer: BOS

• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with gasket/seal
• Height [mm]: 103
• Inner Diameter [mm]: 13
• Outer Diameter [mm]: 92
• Inner Diameter 1 [mm]: 28
• SVHC: No SVHC present!
• Name: KšTUSEFILTER
• Manufacturer: MAN

• Filtritüüp: Filtrer
• Välisläbimõõt [mm]: 92
• Siseläbimõõt [mm]: 28
• Siseläbimõõt 1 [mm]: 6
• Kõrgus (mm): 101
• Manufacturer: HENGST FILTER

• Installatsiooni pool: Tagasild
• Läbimõõt [mm]: 170
• Laius (mm): 40
• Pidurisüsteem: ATE TEVES
• Manufacturer: ASHIKA

• Fitting Position: Rear Axle
• Construction Year to: 12.2013
• Pidurisüsteem: Perrot
• Laius 1 (mm): 164,6
• Kõrgus (mm): 73
• Jämedus/Tugevus (mm): 20
• Kontrolltähistus: ECE R90
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS LORO

Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud, ilma kulumihoiatuseta Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Construction Year to: 12.2013
• Fitting Position: Rear Axle
• Kulumishoiatus kontakt: ilma kulumihoiatuseta
• Jämedus/Tugevus (mm): 20
• Laius (mm): 164,6
• Kõrgus (mm): 73
• Pidurisüsteem: Perrot
• jälgida mõõtu:
• Manufacturer: JPN

• Fitting Position: Front Axle
• Width [mm]: 165
• Thickness [mm]: 20
• Height [mm]: 73
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Perrot
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Rear Axle
• Axle Number: 741.130/741.131
• Construction Year to: 12.2013
• Laius (mm): 164,6
• Jämedus/Tugevus (mm): 20
• Kõrgus (mm): 73
• Pidurisüsteem: Perrot
• Manufacturer: DENCKERMANN ZAWIESZENIE

Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud, ilma kulumihoiatuseta

• Jämedus/Tugevus (mm): 20
• Pikkus (mm): 164,7
• Pidurisüsteem: Brembo
• WVA-number: 29237
• Kõrgus (mm): 68
• Installatsiooni pool: Esisild
• Manufacturer: ASHIKA-KLOCKI

• Fitting Position: Front Axle
• Axle Code: 730605/742501, 742505
• Quantity per packing unit: 4
• Thickness [mm]: 21.7
• Width [mm]: 174.8
• Height [mm]: 85.5
• Brake System: MERITOR 2X60
• Manufacturer: LPR

• Fitting Position: Rear Axle, Front Axle
• Brake System: MERITOR 2X60
• Height [mm]: 85.5
• Thickness [mm]: 21.7
• Wear Warning Contact: prepared for wear warning indicator
• Width [mm]: 175
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Fitting Position: Front Axle
• Width [mm]: 175
• Thickness [mm]: 21
• Height [mm]: 86
• Wear Warning Contact: excl. wear warning contact
• Brake System: ATE
• Manufacturer: KAMOKA

• Fitting Position: Front Axle
• Laius 1 (mm): 164,6
• Kõrgus 1 (mm): 68
• Jämedus/Tugevus 1 (mm): 20
• Pidurisüsteem: BREMBO
• Hoiatuskontakti pikkus (mm): 260
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• Kaal (kg): 2,59
• Kulumisnäidikute arv [ühe telje kohta]: 2
• Montaažiinfo: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Fitting Position: Rear Axle
• Laius 1 (mm): 175,1
• Kõrgus 1 (mm): 85,6
• Jämedus/Tugevus 1 (mm): 21,7
• Pidurisüsteem: LUCAS/TRW
• Hoiatuskontakti pikkus (mm): 220, 310
• Kulumishoiatus kontakt: koos kulumianduriga
• Kaal (kg): 3,85
• Kulumisnäidikute arv [ühe telje kohta]: 4
• Montaažiinfo: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Brake System: Perrot
• Construction Year to: 12.2013
• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Test Mark: ECE-R90
• Height 1 [mm]: 85.6
• Wear Warning Contact: prepared for wear warning indicator
• Vibration: without vibration damper
• Width 1 [mm]: 174.8
• Thickness 1 [mm]: 22
• Manufacturer: METELLI UKL.HAMULCOWY

• Engine Code: OM 904.923
• Construction Year from: 10.1998
• Construction Year to: 01.2001
• Fitting Position: Front Axle, Rear Axle
• Block Separation:
• Axle Number: 742.501
• Supplementary Article/Info 2: with mounting manual
• Article number of recommended accessories: 1987473588, 1987474969, 1987473607
• Product must be determined on the vehicle or the motor:
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 29835
• Thickness [mm]: 21.7
• Width [mm]: 174.5
• Height [mm]: 86.7
• Brake System: Lucas-Girling
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: BOS

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Test Mark: E9 90R-02A0841/3644
• Brake System: Brembo
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 29237
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: incl. wear warning contact
• Width 1 [mm]: 164.8
• Width 2 [mm]: 165
• Height 1 [mm]: 68
• Height 2 [mm]: 68
• Thickness 1 [mm]: 20.2
• Thickness 2 [mm]: 20.2
• Manufacturer: DELPHI HAMULCE

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Pidurisüsteem: Brembo
• Kulumisnäidikute arv [ühe telje kohta]: 2
• Piirangutega toode/piirangu info: koos lisadega
• Laius (mm): 164,8
• Kõrgus (mm): 68
• Kõrgus 1 (mm): 68
• Jämedus/Tugevus (mm): 20
• WVA-number: 29160
• Kulumishoiatus kontakt: koos kulumianduriga
• Kaal (kg): 2,915
• Konteineri tüüp: Sahtel
• pakendi pikkus [cm]: 20
• pakendi laius [cm]: 11
• pakendi kõrgus [cm]: 11
• Keermestatud varraste arv: 4
• Manufacturer: JURID

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Brake System: MERITOR 2X60
• Width [mm]: 175
• Height [mm]: 85.5
• Thickness [mm]: 21.7
• Wear Warning Contact: prepared for wear warning indicator
• Bore Diameter 1 [mm]: 3.1
• Test Mark: E9 90R-02A1249/0644
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW
• Quality class: Q

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Construction Year to: 12.2013
• Tootja piirang: BREMBO
• Värv: must
• WVA-number: 29160
• Kontrolltähistus: E20 90R-02A0130/016
• Laius (mm): 164,8
• Jämedus/Tugevus (mm): 20,2
• Kõrgus (mm): 67,9
• Manufacturer: BRECK KLOCKI HAMULCOWE

Kulumishoiatus kontakt: ilma kulumihoiatuseta, kulumimärguande näidiku jaoks ettevalmistatud

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: BREMBO
• Width [mm]: 164.8
• Height [mm]: 87.9
• Thickness [mm]: 20.2
• Wear Warning Contact: incl. wear warning contact
• Number of wear indicators [per axle]: 2
• Warning Contact Length [mm]: 225
• Supplementary Article/Info 2: with brake caliper screws
• Supplementary Article/Supplementary Info: with accessories
• Test Mark: E9 90R - 01716/003
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Brake System: ATE
• Width [mm]: 175
• Height [mm]: 86
• Thickness [mm]: 22
• Wear Warning Contact: prepared for wear warning indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Construction Year to: 12.2013
• Tootja piirang: BREMBO
• Värv: must
• Piirangutega toode/piirangu info: koos lisadega
• WVA-number: 29237
• Kontrolltähistus: E20 90R-02A0130/016
• Laius (mm): 164,8
• Jämedus/Tugevus (mm): 20,8
• Kõrgus (mm): 68
• Manufacturer: BRECK KLOCKI HAMULCOWE

Kulumishoiatus kontakt: ilma kulumihoiatuseta, kulumimärguande näidiku jaoks ettevalmistatud Piirangutega toode/piirangu info 2: ilma kokkusurumisvastase plekita, koos pidurisadula kruvidega

• Construction Year to: 12.2013
• Axle Number: 741.130/741.131
• Fitting Position: Rear Axle
• Laius (mm): 164,6
• Kõrgus (mm): 73
• Jämedus/Tugevus (mm): 20
• Piirangutega toode/piirangu info: koos lisadega
• Piirangutega toode/piirangu info 2: koos pidurisadula kruvidega
• Kruvide arv: 4
• Pidurisüsteem: Perrot
• Kontrolltähistus: E1 90R-01336/175
• MAPP-code olemas:
• soovitava lisavarustuse artiklinumber: 13.0460-0281.2, 24.8190-0417.2
• jälgida mõõtu:
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: ATE
• Quality class: Q

Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud, ilma kulumihoiatuseta

• Construction Year to: 12.2013
• Fitting Position: Front Axle
• Laius (mm): 174,8
• Kõrgus (mm): 85,5
• Jämedus/Tugevus (mm): 21,7
• Pidurisüsteem: ATE
• Kontrolltähistus: E1 90R-01788/671
• MAPP-code olemas:
• soovitava lisavarustuse artiklinumber: 24.8190-0415.2, 24.8190-0423.2
• jälgida mõõtu:
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: ATE
• Quality class: Q

Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud, ilma kulumihoiatuseta

• Fitting Position: Front Axle, Rear Axle
• Quantity per packing unit: 4
• Width [mm]: 175
• Thickness [mm]: 22
• Height [mm]: 86
• Wear Warning Contact: prepared for wear warning indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• WVA Number: 29835
• Name: BR P B4 007
• Manufacturer: BREMBO

• Fitting Position: Front Axle, Rear Axle
• Quantity per packing unit: 4
• Pidurisüsteem: Meritor
• Veljesuurus (toll): 22
• Laius (mm): 175
• Kõrgus (mm): 85
• Kõrgus 1 (mm): 85
• Jämedus/Tugevus (mm): 22
• Hoiatuskontakti pikkus (mm): 175
• soovitava lisavarustuse artiklinumber: FAI103
• WVA-number: 29835
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• Kaal (kg): 4,163
• Konteineri tüüp: Sahtel
• pakendi pikkus [cm]: 20,5
• pakendi laius [cm]: 11
• pakendi kõrgus [cm]: 11
• Manufacturer: JURID