• Fitting Position: Left, Right, Rear Axle
• Required quantity: 2
• Total Length [mm]: 57.5
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU358217411
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 06.1998
• Fitting Position: Left, Front Axle
• Required quantity: 1
• Cable Length [mm]: 785
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with clip
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU358218691
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 06.1998
• Fitting Position: Right, Front Axle
• Required quantity: 1
• Cable Length [mm]: 780
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with clip
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU358217481
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• paired article number: HCA-FR-045
• Supplementary Article/Info 2: with cable
• Fitting Position: Front Axle Right
• Fabrication Number: HCA-FR-046
• Manufacturer: NTY

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

Manufacturer: NRF

• Oxygen Sensor: Switching-type Oxygen Sensor
• Length [mm]: 373
• Number of pins: 4
• Guarantee: 3 years guarantee
• Weight [kg]: 0.13
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV135

• Construction Year from: 09.1996
• can be programmed:
• Colour: silver
• Frequency Range [MHz]: 433
• Material: Steel
• Name: BS F026C00466
• Manufacturer: BOSCH

• Length [mm]: 373
• Number of pins: 4
• Oxygen Sensor: Thread pre-greased
• Fabrication Number: ESL-FR-008
• Manufacturer: NTY

Lisainfo: ENG. 1,4,1.6,1.8,2.0 FORD FOCUS 04-, C-MAX 07-, MONDEO IV 07-15, GALAXY II 06-15, S-MAX 06-14, VOLVO C30 06-12, S40 II 04-12, S60 II 10-14, S80 II 08-16, XC60 09-17 /REGULACYJNA, Dœ.CAœK. 373MM Additional information: ENG. 1,4,1.6,1.8,2.0 FORD FOCUS 04-, C-MAX 07-, MONDEO IV 07-15, GALAXY II 06-15, S-MAX 06-14, VOLVO C30 06-12, S40 II 04-12, S60 II 10-14, S80 II 08-16, XC60 09-17 /REGULACYJNA, Dœ.CAœK. 373MM

• Construction Year from: 09.1996
• can be programmed:
• Colour: black
• Frequency Range [MHz]: 433
• Material: Rubber
• Manufacturer: BOSCH
• Name: BS F026C00469

• Construction Year from: 09.1996
• can be programmed:
• Colour: Titanium
• Frequency Range [MHz]: 433
• Material: Steel
• Manufacturer: BOSCH
• Name: BS F026C00467
• Lisainfo: F026C00467 BOSCH
• Additional information: F026C00467 BOSCH

• Construction Year from: 09.1996
• can be programmed:
• Colour: black
• Frequency Range [MHz]: 433
• Material: Steel
• Manufacturer: BOSCH

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.09
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Construction Year from: 09.2001
• Construction Year to: 08.2002
• Oxygen Sensor: Regulating Sensor, Finger-type Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Number of pins: 3
• Connector Shape: oval
• Number of connectors: 2
• for OE number: AJ9318211
• Name: Andur, heitgaasisurve
• Manufacturer: MD

• Construction Year from: 09.2001
• Construction Year to: 08.2002
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 422
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH
• Name: BS 0258986603

• Construction Year from: 09.2001
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 422
• Available as universal article as well, see article no.: 0258005729
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Oxygen Sensor: Diagnostic Probe, Heated
• Fitting Position: Left, Right
• Required quantity: 2
• Number of pins: 4
• Cable Length [mm]: 670
• Quality: OE EQUIVALENT
• for OE number: 466016355004
• Manufacturer: MEAT&DORIA

• Construction Year from: 09.2000
• Oxygen Sensor: Regulating Sensor, Unheated
• Fitting Position: Left, Right, Exhaust Manifold
• Required quantity: 2
• Number of pins: 4
• Connector Shape: round
• Cable Length [mm]: 330
• for OE number: 1327548
• Manufacturer: MEAT&DORIA

• Construction Year from: 09.2000
• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Fitting Position: Left, Right, Exhaust Manifold
• Required quantity: 2
• Line insulation design: with silicone-coated woven-fibre insulation
• Thread Size: M18 x 1,5
• Connector Shape: round
• Length [mm]: 400
• Cable Length [mm]: 400
• Conductor Number: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 09.1998
• Construction Year to: 08.2000
• Oxygen Sensor: Regulating Sensor, Heated
• Fitting Position: Left, Right, Exhaust Manifold
• Required quantity: 2
• Number of pins: 4
• Cable Length [mm]: 290
• Quality: OE EQUIVALENT
• for OE number: 1471423
• Manufacturer: MEAT&DORIA

• Construction Year from: 09.1996, 09.2001, 09.2002
• Construction Year to: 08.2001
• Oxygen Sensor: Regulating Sensor, Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Construction Year from: 09.2001
• Construction Year to: 08.2002
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Fitting Position: Left, Right, after catalytic converter
• Required quantity: 2
• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 750
• Number of pins: 4
• Manufacturer: VEMO GERMANY

Oxygen Sensor: Diagnostic Probe, Planar Sensor, Thread pre-greased General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 09.2000
• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Fitting Position: Left, Right, Exhaust Manifold
• Required quantity: 2
• Line insulation design: with silicone-coated woven-fibre insulation
• Thread Size: M18 x 1,5
• Cable Length [mm]: 320
• Conductor Number: 4
• Connector Shape: round
• Length [mm]: 450
• Number of pins: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.