Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Filter type: In-
Line Filter - Length [mm]: 130
- Outer Diameter [mm]: 69
-
Diameter 1/Diameter 2 [mm]: IN/
OUT: 7 -
Manufacturer: ASHIKA-
FILTRY
-
Filter type: In-
Line Filter - Length [mm]: 130
- Outer Diameter [mm]: 69
-
Diameter 1/Diameter 2 [mm]: IN/
OUT: 7 - Manufacturer: JAPKO
- Construction Year from: 10.1989
-
Filter type: In-
Line Filter - Height [mm]: 120
- Outer Diameter 1 [mm]: 57
- Outer Diameter 2 [mm]: 60
- Inner Diameter 1 [mm]: 8
- Inner Diameter 2 [mm]: 8
- Manufacturer: DENCKERMANN FILTRY
-
Filter type: Spin-
on Filter - Manufacturer: JPN
- Height [mm]: 125
- Inlet Ø [mm]: 8
- Outlet Ø [mm]: 8
- Outer Diameter [mm]: 55.5
- Outer Diameter 1 [mm]: 63
- Filter type: Filter Insert
- Name: BM FE1514
- Manufacturer: BREMSI
- Outer Diameter 1 [mm]: 64.5
- Length [mm]: 56.5
- Width [mm]: 64.5
- Height [mm]: 125
- Outer Diameter [mm]: 56.5
-
Filter type: Spin-
on Filter - Inlet Ø [mm]: 8
- Outlet Ø [mm]: 8
- Manufacturer: ACKOJA
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Filter type: In-
Line Filter - Length [mm]: 118
- Housing material: Metal
- Outer Diameter [mm]: 62
- Pipe Diameter [mm]: 8
- Weight [kg]: 0.181
- Observe service information:
- Manufacturer: BLUEPRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Filter type: In-
Line Filter - Length [mm]: 118
- Housing material: Metal
- Outer Diameter [mm]: 62
- Pipe Diameter [mm]: 8
- Weight [kg]: 0.181
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Height [mm]: 122
- Outer Diameter [mm]: 60
- Packing Type: Carton
-
Filter type: In-
Line Filter - Inlet Ø [mm]: 9.3
- Outlet Ø [mm]: 8
- Packaging length [cm]: 8
- Packaging width [cm]: 8
- Packaging height [cm]: 12.3
- Name: CH CFF100215
- Manufacturer: CHAMPION
- Filter type: Filter Insert
- Diameter [mm]: 60
- Inner Diameter 1 [mm]: 8
- Inner Diameter 2 [mm]: 8
- Height [mm]: 135
- for OE number: 7606404
- Manufacturer: MEAT & DORIA
- Construction Year to: 08.1990
- Number of Teeth: 106
-
Length [mm]: 1,
011 - Width [mm]: 19
- Tooth Pitch [mm]: 9.525
- Manufacturer: BOSCH
- Construction Year from: 10.1989
-
Filter type: In-
Line Filter - Outer Diameter [mm]: 62
- Height [mm]: 122
- Manufacturer: HENGST FILTER
- Construction Year to: 08.1990
- Fuel Mixture Formation: Petrol Injection
-
Filter type: In-
Line Filter - Diameter [mm]: 63.5
- Height [mm]: 125
- Inlet Ø [mm]: 8
- Outlet Ø [mm]: 8
- Manufacturer: BOSCH
- Name: BS 0450905326
- Construction Year from: 10.1989
-
Filter type: In-
Line Filter - Height [mm]: 121
- Outer Diameter [mm]: 62
- Inlet Ø [mm]: 8
- Outlet Ø [mm]: 8
- SVHC: No SVHC present!
- Manufacturer: FILTRON
- Driven Units: Camshaft
- Number of Teeth: 106
- Width [mm]: 19
- Belts: with trapezoidal tooth profile
- Manufacturer: JAPKO
- Driven Units: Camshaft
- Number of Teeth: 106
- Packaging length [cm]: 25.5
- Packaging width [cm]: 16
- Packaging height [cm]: 3
- Weight [kg]: 0.133
- Width [mm]: 19
- Tooth Pitch [mm]: 9.525
- Manufacturer: CONTITECH
- Length [mm]: 109
- Width [mm]: 40
- Test Mark: ECE R90 Not Required
- Fitting Position: Front Axle
- Thickness 1 [mm]: 16
- Weight [kg]: 0.94
- Observe service information:
- Manufacturer: BLUEPRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Brake Type: Disc Brake
- Length [mm]: 108.8
- Height [mm]: 40.4
- Thickness [mm]: 15.3
- WVA Number: 20958
- Test Mark: ECE R90 APPROVED
- Manufacturer: JAPKO
- Fitting Position: Rear Axle
- Inner brake drum diameter [mm]: 180
- Width [mm]: 35
- Weight [kg]: 0.97
-
Brake System: BOSCH/
BENDIX -
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: ABS
- Fitting Position: Front Axle
- Brake Type: Disc Brake
- Length [mm]: 108.8
- Height [mm]: 40.4
- Thickness [mm]: 15.3
- WVA Number: 20958
- Test Mark: ECE R90 APPROVED
-
Manufacturer: ASHIKA-
KLOCKI
- Construction Year from: 10.1989
-
Filter type: In-
Line Filter - Height [mm]: 125
- Outer Diameter [mm]: 64
- Inlet Ø [mm]: 8
- Outlet Ø [mm]: 8
- Outer Diameter 1 [mm]: 57
- SVHC: No SVHC present!
- Manufacturer: MANN
- Fitting Position: Rear Axle
- Diameter [mm]: 180
- Width [mm]: 36
- Manufacturer: JAPKO
-
Filter type: In-
Line Filter - Diameter [mm]: 54.9
- Height [mm]: 125
- Inlet Ø [mm]: 8
- Outlet Ø [mm]: 8
- Net Weight [g]: 112
- Packaging height [cm]: 14
- Packaging length [cm]: 6.5
- Packaging width [cm]: 6.5
-
Manufacturer: FILTRY KNECHT /
MAHLE
-
Filter type: In-
Line Filter - Diameter [mm]: 54.9
- Height [mm]: 125
- Inlet Ø [mm]: 8
- Outlet Ø [mm]: 8
- Net Weight [g]: 112
- Packaging height [cm]: 14
- Packaging length [cm]: 6.5
- Packaging width [cm]: 6.5
- Manufacturer: MAHLE KNECHT
- Fitting Position: Front Axle
- Quantity per packing unit: 4
- Manufacturer Restriction: SUMITOMO
- Wear Warning Contact: not prepared for wear warning indicator
- Height [mm]: 40.4
- Width [mm]: 108.5
- Thickness [mm]: 16
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
- Construction Year from: 08.1986
- Fitting Position: Front Axle
- Brake System: SUMITOMO
- Width [mm]: 162
- Height [mm]: 49.8
- Thickness [mm]: 17
- WVA Number: 21347
- Wear Warning Contact: incl. wear warning contact
- Number of wear indicators [per axle]: 2
- Operating Mode: Mechanical
-
Supplementary Article/Info 2: without anti-
squeak plate -
Test Mark: ECE-
R90 - Weight [kg]: 1.79
- Manufacturer: VALEO
- Number of Teeth 1: 106
- Width 1 [mm]: 19
- Manufacturer: JAPKO
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks