• Filter type: In-Line Filter
• Length [mm]: 130
• Outer Diameter [mm]: 69
• Diameter 1/Diameter 2 [mm]: IN/OUT: 7
• Manufacturer: ASHIKA

• Filter type: In-Line Filter
• Length [mm]: 130
• Outer Diameter [mm]: 69
• Diameter 1/Diameter 2 [mm]: IN/OUT: 7
• Manufacturer: JAPKO

• Construction Year from: 10.1992
• Filter type: In-Line Filter
• Height [mm]: 120
• Outer Diameter 1 [mm]: 57
• Outer Diameter 2 [mm]: 60
• Inner Diameter 1 [mm]: 8
• Inner Diameter 2 [mm]: 8
• Manufacturer: DENCKERMANN FILTRY

• Filter type: Pre-Filter
• Height [mm]: 131
• Outer Diameter 1 [mm]: 72
• Inner Diameter 1 [mm]: 8
• Inner Diameter 2 [mm]: 8
• Name: KšTUSEFILTER
• Manufacturer: ALC

• Height [mm]: 136.5
• Outer Diameter [mm]: 55
• Filter type: In-Line Filter
• Weight [kg]: 0.18
• Manufacturer: DJ PARTS

• Construction Year from: 10.1992
• Filter type: In-Line Filter
• Height [mm]: 125
• Outer Diameter [mm]: 64
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Outer Diameter 1 [mm]: 57
• Name: KšTUSEFILTER
• Manufacturer: MAX

• Filtritüüp: Keeratav filter
• Manufacturer: JPN

• Engine Code: GA16DE
• Braking/Drive Dynamics: for vehicles without ABS
• Filter type: In-Line Filter
• Length [mm]: 118
• Housing material: Metal
• Outer Diameter [mm]: 62
• Pipe Diameter [mm]: 8
• Weight [kg]: 0.181
• Observe service information:
• Name: KšTUSEFILTER
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Outer Diameter 1 [mm]: 64.5
• Length [mm]: 56.5
• Width [mm]: 64.5
• Height [mm]: 125
• Outer Diameter [mm]: 56.5
• Filter type: Spin-on Filter
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Manufacturer: ACKOJA

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: GA16DE
• Braking/Drive Dynamics: for vehicles without ABS
• Filter type: In-Line Filter
• Length [mm]: 118
• Housing material: Metal
• Outer Diameter [mm]: 62
• Pipe Diameter [mm]: 8
• Weight [kg]: 0.181
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: In-Line Filter
• Height [mm]: 123
• Outer Diameter [mm]: 62
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Name: KšTUSEFILTER
• Manufacturer: ALC

• Construction Year from: 10.1992
• Kõrgus (mm): 122
• Välisläbimõõt [mm]: 60
• Konteineri tüüp: Sahtel
• Filtritüüp: Ühendusfilter
• Sisend-Ø (mm): 9,3
• Väljalase-Ø (mm): 8
• pakendi pikkus [cm]: 8
• pakendi laius [cm]: 8
• pakendi kõrgus [cm]: 12,3
• Name: CH CFF100215
• Manufacturer: CHAMPION

• Diameter [mm]: 60
• Filter type: In-Line Filter
• Height [mm]: 120
• Housing material: Aluminium
• Name: KšTUSEFILTER
• Manufacturer: MEY
• Lisainfo: 36-143230005
• Additional information: 36-143230005

• Construction Year from: 10.1992
• Filter type: In-Line Filter
• Height [mm]: 121
• Outer Diameter [mm]: 62
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Construction Year from: 10.1992
• Filter type: In-Line Filter
• Outer Diameter [mm]: 62
• Height [mm]: 122
• Manufacturer: HENGST FILTER

• Braking/Drive Dynamics: for vehicles without ABS
• Fitting Position: Rear Axle
• Diameter [mm]: 180
• Width [mm]: 32
• Brake System: TOKICO
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 108.7
• Height [mm]: 48
• Thickness [mm]: 15.8
• WVA Number: 21659
• Test Mark: ECE R90 APPROVED
• Manufacturer: JAPKO

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles without ABS
• Quantity per packing unit: 4
• Inner brake drum diameter [mm]: 180
• Width [mm]: 32
• Brake System: TOKICO
• Manufacturer: LPR

• Driven Units: Camshaft
• Number of Teeth: 106
• Packaging length [cm]: 25.5
• Packaging width [cm]: 16
• Packaging height [cm]: 3
• Weight [kg]: 0.133
• Width [mm]: 19
• Tooth Pitch [mm]: 9.525
• Manufacturer: CONTINENTAL CTAM

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Width [mm]: 41
• Brake System: SUMITOMO
• Inner brake drum diameter [mm]: 228.6
• Manufacturer: LPR

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 108.7
• Height [mm]: 48
• Thickness [mm]: 15.8
• WVA Number: 21659
• Test Mark: ECE R90 APPROVED
• Manufacturer: ASHIKA-KLOCKI

• Construction Year from: 10.1992
• Filter type: In-Line Filter
• Height [mm]: 125
• Outer Diameter [mm]: 64
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Outer Diameter 1 [mm]: 57
• SVHC: No SVHC present!
• Name: KšTUSEFILTER
• Manufacturer: MAN

• Fitting Position: Rear Axle
• for model code: N14 Series
• Quantity per packing unit: 4
• Brake System: Tokico
• Inner brake drum diameter [mm]: 180
• Width [mm]: 31
• Manufacturer: DELPHI HAMULCE

• Fitting Position: Rear Axle
• Diameter [mm]: 180
• Width [mm]: 31
• Manufacturer: ASHIKA

• Construction Year from: 10.1992
• Filter type: In-Line Filter
• Diameter [mm]: 54.9
• Height [mm]: 125
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Net Weight [g]: 112
• Packaging height [cm]: 14
• Packaging length [cm]: 6.5
• Packaging width [cm]: 6.5
• Name: KN KL171
• Manufacturer: KNECHT

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Width [mm]: 31
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Tokico
• Inner brake drum diameter [mm]: 180
• Manufacturer: BREMBO
• Name: BR S 56 506

• Braking/Drive Dynamics: for vehicles with ABS
• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 99
• Height [mm]: 33.6
• Thickness [mm]: 13.8
• WVA Number: 21734
• Manufacturer: JAPKO

• Length [mm]: 109
• Width [mm]: 48
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 17
• Weight [kg]: 1.182
• Observe service information:
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 180
• Width [mm]: 31
• Weight [kg]: 0.97
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle
• Diameter [mm]: 180
• Width [mm]: 31
• Manufacturer: JAPKO

• Fitting Position: Rear Axle
• Diameter [mm]: 180
• Width [mm]: 31
• Supplementary Article/Supplementary Info: without spring
• Name: PIDURIKLOTSIDE KOMPLEKT
• Manufacturer: MEY

• Construction Year to: 12.1991
• Fitting Position: Front Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Quantity per packing unit: 4
• Width [mm]: 108
• Thickness [mm]: 15
• Brake System: SUMITOMO
• Height [mm]: 47.8
• Manufacturer: LPR

• Fitting Position: Front Axle
• for model code: N14 Series/Pulsar
• Quantity per packing unit: 4
• FMSI Code: D510-7389
• Brake System: Sumitomo
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• WVA Number: 21657
• Friction Lining Material: Semi-Metallic
• Wear Warning Contact: not prepared for wear warning indicator
• Width 1 [mm]: 108.7
• Width 2 [mm]: 108.2
• Height 1 [mm]: 47.4
• Height 2 [mm]: 47.4
• Thickness 1 [mm]: 16.5
• Thickness 2 [mm]: 16.5
• Manufacturer: DELPHI LOCKHEED HAMULCE

• Construction Year from: 10.1992
• Filter type: In-Line Filter
• Diameter [mm]: 54.9
• Height [mm]: 125
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Net Weight [g]: 112
• Packaging height [cm]: 14
• Packaging length [cm]: 6.5
• Packaging width [cm]: 6.5
• Manufacturer: MAHLE KNECHT

• Fitting Position: Front Axle
• for model code: N14 Series/Pulsar
• Quantity per packing unit: 4
• FMSI Code: D510-7389
• Test Mark: E1 90R-01881/998
• Brake System: Sumitomo
• Supplementary Article/Info 2: without anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• WVA Number: 21657, 21658, 21659
• Friction Lining Material: Semi-Metallic
• Width 1 [mm]: 108.7
• Width 2 [mm]: 108.2
• Height 1 [mm]: 47.8
• Height 2 [mm]: 47.8
• Thickness 1 [mm]: 16.4
• Thickness 2 [mm]: 16.4
• Manufacturer: DELPHI HAMULCE

Wear Warning Contact: prepared for wear warning indicator, with acoustic wear warning

• Width [mm]: 30
• Outer Diameter [mm]: 179
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 4
• Weight [kg]: 0.98
• Name: PIDURIKLOTSIDE KOMPLEKT
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Width [mm]: 109
• Thickness [mm]: 17
• Height [mm]: 48
• Wear Warning Contact: with acoustic wear warning
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Sumitomo
• Number of wear indicators [per axle]: 2
• WVA Number: 21657, 21658, 21659
• Name: BR P 56 027
• Manufacturer: BREMBO

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles without ABS
• Inner brake drum diameter [mm]: 180
• Width [mm]: 31
• Supplementary Article/Info 2: without handbrake lever
• Packaging length [cm]: 19.8
• Packaging width [cm]: 12.5
• Packaging height [cm]: 8.2
• Weight [kg]: 0.95
• Manufacturer: TEXTAR

• Engine Code: GA16DS
• Construction Year to: 10.1992
• Fitting Position: Front Axle
• Wear Warning Contact: with acoustic wear warning
• Supplementary Article/Info 2: with anti-squeak plate
• Article number of recommended accessories: 1987474631
• Observe technical data:
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 21657
• Thickness [mm]: 16.5
• Width [mm]: 108.6
• Height [mm]: 48
• Manufacturer Restriction: SUMITOMO System
• Manufacturer: BOSCH UK£ADY HAMULCOWE

• Fitting Position: Front Axle
• Construction Year from: 01.1992
• Quantity per packing unit: 4
• Manufacturer Restriction: SUMITOMO
• Wear Warning Contact: with acoustic wear warning
• Test Mark: E1 90R 01024/125
• Height [mm]: 48
• Width [mm]: 108.5
• Thickness [mm]: 16.5
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Width [mm]: 108.3
• Height [mm]: 47.9
• Thickness [mm]: 16.4
• Wear Warning Contact: with acoustic wear warning
• Brake System: Sumitomo
• Test Mark: E9 90R-01247/225
• MAPP code available:
• Article number of recommended accessories: 13.0460-0336.2
• Observe dimensions:
• Manufacturer: ATE