• Filtritüüp: Ühendusfilter
• Pikkus (mm): 118
• Välisläbimõõt [mm]: 61
• Läbimõõt 1/Läbimõõt 2 (mm): IN/OUT: 8
• Manufacturer: ASHIKA

• Filtritüüp: Ühendusfilter
• Pikkus (mm): 118
• Välisläbimõõt [mm]: 61
• Läbimõõt 1/Läbimõõt 2 (mm): IN/OUT: 8
• Manufacturer: JAPKO

• Filter type: In-Line Filter
• Length [mm]: 118
• Outer Diameter [mm]: 61
• Diameter 1/Diameter 2 [mm]: IN/OUT: 8
• Name: KšTUSEFILTER
• Manufacturer: JPA

• Filter type: In-Line Filter
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• for OE number: 119113204500
• Height [mm]: 140
• Fuel Type: Petrol
• Outer Diameter [mm]: 56
• Manufacturer: KAMOKA

• Filtritüüp: Keeratav filter
• Manufacturer: JPN

• Välisläbimõõt 1 [mm]: 64,5
• Pikkus (mm): 56,5
• Laius (mm): 64,5
• Kõrgus (mm): 125
• Välisläbimõõt [mm]: 56,5
• Filtritüüp: Keeratav filter
• Sisend-Ø (mm): 8
• Väljalase-Ø (mm): 8
• Manufacturer: ACKOJA

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Filter type: In-Line Filter
• Height [mm]: 123
• Outer Diameter [mm]: 62
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Name: KšTUSEFILTER
• Manufacturer: ALC

• Kõrgus (mm): 122
• Välisläbimõõt [mm]: 60
• Konteineri tüüp: Sahtel
• Filtritüüp: Ühendusfilter
• Sisend-Ø (mm): 9,3
• Väljalase-Ø (mm): 8
• pakendi pikkus [cm]: 8
• pakendi laius [cm]: 8
• pakendi kõrgus [cm]: 12,3
• Name: CH CFF100215
• Manufacturer: CHAMPION

• Filter type: Filter Insert
• Diameter [mm]: 60
• Inner Diameter 1 [mm]: 8
• Inner Diameter 2 [mm]: 8
• Height [mm]: 135
• for OE number: 7606404
• Manufacturer: MEAT & DORIA

• Keermemõõt: UNF 3/4'-16
• Filtritüüp: Filtrer
• Kõrgus (mm): 140
• Välisläbimõõt [mm]: 97
• Name: BM FE0799
• Manufacturer: BREMSI

• Filter type: In-Line Filter
• Height [mm]: 139
• Outer Diameter [mm]: 55
• Diameter 3 [mm]: 8
• Diameter 4 [mm]: 8
• Name: Fuel filter
• Quality class: Q

Lisainfo: "Tootja: COOPERSFIAAM FILTERS
CORSA A HATCHBACK (9
(kvaliteediklass: PJ)" Additional information: "Tootja: COOPERSFIAAM FILTERS
CORSA A HATCHBACK (9
(kvaliteediklass: PJ)"

• Filtritüüp: Ühendusfilter
• Kõrgus (mm): 139
• Välisläbimõõt [mm]: 55
• Läbimõõt 3 (mm): 8
• Läbimõõt 4 (mm): 8
• Manufacturer: PURFLUX

• Filtritüüp: Keeratav filter
• Kõrgus (mm): 139
• Siseläbimõõt [mm]: 8
• Välisläbimõõt [mm]: 55
• Quality class: PJ
• Name: Fuel filter

• Filtritüüp: Ühendusfilter
• Välisläbimõõt [mm]: 62
• Kõrgus (mm): 122
• Manufacturer: HENGST FILTER

• Filter type: In-Line Filter
• Diameter [mm]: 54.9
• Height [mm]: 125
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Net Weight [g]: 112
• Packaging height [cm]: 14
• Packaging length [cm]: 6.5
• Packaging width [cm]: 6.5
• Manufacturer: FILTRY KNECHT / MAHLE
• Name: KN KL171

• Installatsiooni pool: Esisild
• Piduriliik: Ketaspidur
• Pikkus (mm): 142
• Kõrgus (mm): 53,3
• Jämedus/Tugevus (mm): 15,9
• WVA-number: 20972
• Kontrolltähistus: ECE R90 APPROVED
• Manufacturer: JAPKO

• Filter type: In-Line Filter
• Diameter [mm]: 54.9
• Height [mm]: 125
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Net Weight [g]: 112
• Packaging height [cm]: 14
• Packaging length [cm]: 6.5
• Packaging width [cm]: 6.5
• Manufacturer: MAHLE KNECHT

• Installatsiooni pool: Esisild
• Piduriliik: Ketaspidur
• Pikkus (mm): 142
• Kõrgus (mm): 53,3
• Jämedus/Tugevus (mm): 15,9
• WVA-number: 20972
• Kontrolltähistus: ECE R90 APPROVED
• Manufacturer: ASHIKA

• Quantity per packing unit: 4
• Installatsiooni pool: Esisild
• Jämedus/Tugevus (mm): 17
• Laius (mm): 142
• Kõrgus (mm): 53,5
• Pidurisüsteem: SUMITOMO
• Kaal (kg): 1,53
• Manufacturer: TOMEX BRAKES

• Fitting Position: Front Axle
• Manufacturer Restriction: Sumitomo
• Jämedus/Tugevus (mm): 16,5
• Kontrolltähistus: R90
• Laius (mm): 142
• Kõrgus (mm): 53
• Manufacturer: KAVO

• Fitting Position: Front Axle
• Width [mm]: 142
• Height [mm]: 53
• Thickness [mm]: 17.2
• Wear Warning Contact: excl. wear warning contact
• Brake System: Lucas
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Length [mm]: 142
• Width [mm]: 53
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 17
• Weight [kg]: 1.44
• Observe service information:
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: L28
• Height [mm]: 145
• Fuel Type: Diesel
• Filter type: Filter Insert
• Outer Diameter [mm]: 94
• Thread Size: UNF 3/4"-16
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle
• Construction Year to: 08.1988
• Quantity per packing unit: 4
• Manufacturer Restriction: SUMITOMO
• Wear Warning Contact: not prepared for wear warning indicator
• Height [mm]: 53.5
• Width [mm]: 142
• Thickness [mm]: 17
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Width [mm]: 60
• Brake System: Akebono
• Inner brake drum diameter [mm]: 295
• Manufacturer: BREMBO
• Name: BR S 56 532

• Fitting Position: Front Axle
• Width [mm]: 142
• Height [mm]: 53
• Thickness [mm]: 17.2
• Wear Warning Contact: not prepared for wear warning indicator
• WVA Number: 20863
• Brake System: Lucas
• Packaging length [cm]: 15.2
• Packaging width [cm]: 8.8
• Packaging height [cm]: 8.4
• Weight [kg]: 1.4
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TEX

• Installatsiooni pool: Tagasild
• Läbimõõt [mm]: 270
• Laius (mm): 52,3
• Manufacturer: ASHIKA

• Fitting Position: Rear Axle
• Manufacturer Restriction: Akebono
• Kontrolltähistus: R90
• Laius (mm): 52
• Piduritrumli läbimõõt seespool [mm]: 270
• Manufacturer: KAVO

• Construction Year to: 03.1989
• Fitting Position: Front Axle
• Article number of recommended accessories: 1987474612, 1987474349
• Observe technical data:
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 20863
• Thickness [mm]: 16.5
• Width [mm]: 131.4
• Height [mm]: 53.3
• Manufacturer Restriction: SUMITOMO System
• Manufacturer: BOSCH

• Fitting Position: Rear Axle
• Piduritrumli läbimõõt seespool [mm]: 270
• Laius (mm): 52
• Kaal (kg): 3,31
• Montaažiinfo: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Construction Year to: 02.1989
• Quantity per packing unit: 4
• Manufacturer Restriction: SUMITOMO
• Wear Warning Contact: not prepared for wear warning indicator
• Height [mm]: 53.4
• Width [mm]: 142
• Thickness [mm]: 17
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW

• Fitting Position: Rear Axle
• Läbimõõt [mm]: 270
• Laius (mm): 52
• Manufacturer: OYODO

• Width [mm]: 50
• Outer Diameter [mm]: 270
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Weight [kg]: 3.444
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.