• Filtritüüp: Ühendusfilter
• Pikkus (mm): 118
• Välisläbimõõt [mm]: 61
• Läbimõõt 1/Läbimõõt 2 (mm): IN/OUT: 8
• Manufacturer: ASHIKA

• Filtritüüp: Ühendusfilter
• Pikkus (mm): 118
• Välisläbimõõt [mm]: 61
• Läbimõõt 1/Läbimõõt 2 (mm): IN/OUT: 8
• Manufacturer: JAPKO

• Filtritüüp: Ühendusfilter
• Kõrgus (mm): 120
• Välisläbimõõt 1 [mm]: 57
• Välisläbimõõt 2 [mm]: 60
• Siseläbimõõt 1 [mm]: 8
• Siseläbimõõt 2 (mm): 8
• Manufacturer: DENCKERMANN FILTRY

• Filter type: In-Line Filter
• Length [mm]: 118
• Outer Diameter [mm]: 61
• Diameter 1/Diameter 2 [mm]: IN/OUT: 8
• Name: KšTUSEFILTER
• Manufacturer: JPA

• Filtritüüp: Keeratav filter
• Manufacturer: JPN

• Filter type: In-Line Filter
• Height [mm]: 125
• Outer Diameter [mm]: 64
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Outer Diameter 1 [mm]: 57
• Name: KšTUSEFILTER
• Manufacturer: MAX

• Kõrgus (mm): 125
• Sisend-Ø (mm): 8
• Väljalase-Ø (mm): 8
• Välisläbimõõt [mm]: 55,5
• Välisläbimõõt 1 [mm]: 63
• Filtritüüp: Filtrer
• Name: BM FE1514
• Manufacturer: BREMSI

• Välisläbimõõt 1 [mm]: 64,5
• Pikkus (mm): 56,5
• Laius (mm): 64,5
• Kõrgus (mm): 125
• Välisläbimõõt [mm]: 56,5
• Filtritüüp: Keeratav filter
• Sisend-Ø (mm): 8
• Väljalase-Ø (mm): 8
• Manufacturer: ACKOJA

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Filter type: In-Line Filter
• Height [mm]: 123
• Outer Diameter [mm]: 62
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Name: KšTUSEFILTER
• Manufacturer: ALC

• Diameter [mm]: 60
• Filter type: In-Line Filter
• Height [mm]: 120
• Housing material: Aluminium
• Name: KšTUSEFILTER
• Manufacturer: MEY
• Lisainfo: 36-143230005
• Additional information: 36-143230005

• Kõrgus (mm): 122
• Välisläbimõõt [mm]: 60
• Konteineri tüüp: Sahtel
• Filtritüüp: Ühendusfilter
• Sisend-Ø (mm): 9,3
• Väljalase-Ø (mm): 8
• pakendi pikkus [cm]: 8
• pakendi laius [cm]: 8
• pakendi kõrgus [cm]: 12,3
• Name: CH CFF100215
• Manufacturer: CHAMPION

• Filter type: Filter Insert
• Diameter [mm]: 60
• Inner Diameter 1 [mm]: 8
• Inner Diameter 2 [mm]: 8
• Height [mm]: 135
• for OE number: 7606404
• Manufacturer: MEAT & DORIA

• Construction Year from: 02.1984
• Filter type: In-Line Filter
• Height [mm]: 122
• Outer Diameter [mm]: 63
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Manufacturer: VALEO

• Filtritüüp: Ühendusfilter
• Välisläbimõõt [mm]: 62
• Kõrgus (mm): 122
• Manufacturer: HENGST FILTER

• Fuel Mixture Formation: Petrol Injection
• Filter type: In-Line Filter
• Diameter [mm]: 63.5
• Height [mm]: 125
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Manufacturer: BOSCH
• Name: BS 0450905326

• Filter type: In-Line Filter
• Height [mm]: 121
• Outer Diameter [mm]: 62
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Installatsiooni pool: Tagasild
• Pikkus (mm): 85
• Kõrgus (mm): 42
• Jämedus/Tugevus (mm): 14
• WVA-number: 21329
• Manufacturer: JAPKO

• Installatsiooni pool: Tagasild
• Piduriliik: Ketaspidur
• Pikkus (mm): 85
• Kõrgus (mm): 43
• Jämedus/Tugevus (mm): 13,8
• Manufacturer: JAPKO

• Construction Year from: 01.1985
• Construction Year to: 02.1987
• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Brake System: AKEBONO
• Height [mm]: 49.3
• Width [mm]: 130
• Thickness [mm]: 17
• Manufacturer: LPR

• Filter type: In-Line Filter
• Height [mm]: 125
• Outer Diameter [mm]: 64
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Outer Diameter 1 [mm]: 57
• SVHC: No SVHC present!
• Name: KšTUSEFILTER
• Manufacturer: MAN

• Driven Units: Oil Pump
• Vehicle configuration line / variant: CR
• Number of Teeth: 133
• Width [mm]: 25.4
• Name: HAMMASRIHM
• Manufacturer: DAY

• Filter type: In-Line Filter
• Diameter [mm]: 54.9
• Height [mm]: 125
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Net Weight [g]: 112
• Packaging height [cm]: 14
• Packaging length [cm]: 6.5
• Packaging width [cm]: 6.5
• Manufacturer: FILTRY KNECHT / MAHLE
• Name: KN KL171

• Length [mm]: 130.1
• Width [mm]: 49.1
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 16.8
• Wear Warning Contact: with acoustic wear warning
• Weight [kg]: 1.418
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: In-Line Filter
• Diameter [mm]: 54.9
• Height [mm]: 125
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Net Weight [g]: 112
• Packaging height [cm]: 14
• Packaging length [cm]: 6.5
• Packaging width [cm]: 6.5
• Manufacturer: MAHLE KNECHT

• Length [mm]: 130
• Width [mm]: 49
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 17
• Wear Warning Contact: with acoustic wear warning
• Weight [kg]: 1.418
• Observe service information:
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Construction Year from: 01.1985
• Construction Year to: 02.1987
• for model code: Z31
• Quantity per packing unit: 4
• FMSI Code: D265-7170 D266-7282
• Test Mark: E9 90R-01823/1530
• Brake System: Akebono
• Supplementary Article/Info 2: without anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• WVA Number: 21099
• Friction Lining Material: Semi-Metallic
• Wear Warning Contact: not prepared for wear warning indicator
• Width 1 [mm]: 130.1
• Width 2 [mm]: 130
• Height 1 [mm]: 49.5
• Height 2 [mm]: 49.5
• Thickness 1 [mm]: 16.5
• Thickness 2 [mm]: 16.5
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP358

• Construction Year from: 02.1984
• Construction Year to: 01.1985
• Fitting Position: Front Axle
• Brake System: AKEBONO
• Width [mm]: 131
• Height [mm]: 49.5
• Thickness [mm]: 17
• WVA Number: 21099
• Wear Warning Contact: incl. wear warning contact
• Number of wear indicators [per axle]: 2
• Operating Mode: Mechanical
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 1.14
• Manufacturer: VALEO

• Vedavad seadmed: Nukkvõll
• Hammastehulk: 133
• Laius (mm): 25
• Rihmad: koos trapetsikujulise hammasprofiiliga
• Manufacturer: JAPKO

• Fitting Position: Rear Axle
• Construction Year from: 01.1985
• Construction Year to: 06.1987
• Quantity per packing unit: 4
• Manufacturer Restriction: SUMITOMO
• Wear Warning Contact: not prepared for wear warning indicator
• Test Mark: E9 90R 027019
• Height [mm]: 42.9
• Width [mm]: 85.3
• Thickness [mm]: 14
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Construction Year from: 07.1987
• Quantity per packing unit: 4
• Manufacturer Restriction: SUMITOMO
• Wear Warning Contact: with acoustic wear warning
• Test Mark: E9 90R 027019
• Height [mm]: 42.9
• Width [mm]: 85.3
• Thickness [mm]: 14
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Outer Diameter 1 [mm]: 60
• Width 1 [mm]: 60
• Manufacturer: SNR
• Name: SN GT368.12

• Engine Code: VG30, VG30T
• Diameter [mm]: 60
• Width [mm]: 31
• Tensioner Pulley Actuation: Manual
• Manufacturer: SKF
• Name: SK VKM72004

• Construction Year from: 01.1985
• Construction Year to: 02.1987
• Fitting Position: Front Axle
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle
• Construction Year from: 01.1985
• Construction Year to: 02.1987
• Quantity per packing unit: 4
• Width [mm]: 130
• Thickness [mm]: 17
• Height [mm]: 49.3
• Manufacturer Restriction: AKEBONO
• Wear Warning Contact: not prepared for wear warning indicator
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Width [mm]: 30
• Outer Diameter [mm]: 60
• Weight [kg]: 0.51
• Name: PINGUTUSRULL,HAMMASRIHM
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Hammastehulk 1: 133
• Laius 1 (mm): 25
• Manufacturer: JAPKO

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Width [mm]: 85
• Thickness [mm]: 14
• Height 1 [mm]: 42
• Height 2 [mm]: 43
• Wear Warning Contact: with acoustic wear warning
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Akebono
• Supplementary Article/Info 2: with anti-squeak plate
• Number of wear indicators [per axle]: 2
• WVA Number: 21121, 21328, 21329
• Manufacturer: BREMBO

• Engine Code: VG30, VG30T
• Belt Width [mm]: 25.4
• Number of Teeth: 133
• Belts: with trapezoidal tooth profile
• Manufacturer: SKF
• Name: SK VKMA92004