Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Construction Year to: 09.2000
-
Exhaust System: for pre-
catalytic converter - for OE number: 226909F600
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 380
- Number of pins: 3
- Weight [g]: 96
- Gross Weight [g]: 126
- Manufacturer: DENSO
Oxygen Sensor: Regulating Probe, Heated, Finger probe, Oxygen Sensor
Additional information: "Tootja: DENSO
ALMERA TINO (V10), 0
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
ALMERA TINO (V10), 0
(kvaliteediklass: Q)"
- Housing Colour: black
- Number of connectors: 1
- Shifting Points [bar]: 0.2
- Weight [kg]: 0.043
- Name: Olisurvellitus
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Housing Colour: black
- Number of connectors: 1
- Shifting Points [bar]: 0.2
- Weight [kg]: 0.043
- Name: SW 82 10 8254
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Housing Colour: black
- Number of connectors: 1
- Shifting Points [bar]: 0.2
- Weight [kg]: 0.043
- Name: OLISURVELLITUS
- Manufacturer: BLP
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Sensor Type: NTC Sensor
- Mounting Type: Bolted
- Number of pins: 1
- Spanner Size: 12
- Thread Size: M12x1.25
- for OE number: 2508070J00
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
-
Thread Size: 1/
8x28 BSP - Housing Colour: white
- Manufacturer: FAE
- Engine Code: QG18DE
- Colour: black
- Pressure [bar]: 0.2
-
Thread Size: 1/
8 GAS - Spanner Size: 24
- Manufacturer: FACET
- Engine Code: QG18DE
- Colour: black
- Pressure [bar]: 0.2
-
Thread Size: 1/
8 GAS - Spanner Size: 24
- Name: OLISURVELLITUS
- Manufacturer: EPS
-
Fabrication Number: ECT-
RE- 003 - Manufacturer: NTY
-
Name: NTY ECT-
RE- 003
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Manufacturer: FAE
- Switch Pressure [bar]: 0.2
-
Thread Size: 1/
8x28 BSPT -
Sensor Type: Closed-
type Sensor - Name: OLISURVELLITUS
- Manufacturer: VER
- Pressure [bar]: 0.2
-
Thread Size: 1/
8 GAS - Spanner Size: 27
- Number of pins: 1
- Technical Information Number: circuit N.C.
- Manufacturer: ERA
- Pressure [bar]: 1.5
- Housing Colour: white
-
Thread Size: NPT1/
8 - Diameter [mm]: 27
- Spanner Size: 27
- Number of pins: 1
- Name: OLISURVELLITUS
- Manufacturer: DLP
Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"
- Sensor Type: NTC Sensor
- Mounting Type: Bolted
- Connector Shape: oval
- Number of pins: 2
- Spanner Size: 19
- Thread Size: M12x1.5
- for OE number: 2345012920
- Supplementary Article/Info 2: with seal ring
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
- Number of connectors: 2
- Weight [kg]: 0.02
- Supplementary Article/Info 2: with seal ring
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Sensor Type: NTC Sensor
- Mounting Type: Bolted
- Connector Shape: oval
- Number of pins: 2
- Socket colour: black
- Spanner Size: 19
- Thread Size: M12x1.5
- for OE number: 22630D9701
- Manufacturer: NRF
-
Thread Size: M12x1,
5 - Spanner Size: 19
- Manufacturer: JPN
- Number of connectors: 2
- Weight [kg]: 0.02
- Supplementary Article/Info 2: with seal ring
- Name: SW 33 10 2488
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thread Size: M12x1.5
- Manufacturer: VERNET
- Housing Colour: blue
- Number of pins: 2
-
Thread Size: M 12X1.5-
6g - Spanner Size: 19
- Manufacturer: DELPHI
-
Name: DE TS10248-
12B1
Manufacturer: BOSCH
- Engine Code: QG18DE
- Housing Colour: blue
-
Thread Size: M12x1,
5 - Spanner Size: 19
-
Corresponds to the original part in colour: red,
blue - Manufacturer: FACET
- Engine Code: QG18DE
- Housing Colour: blue
-
Thread Size: M12x1,
5 - Spanner Size: 19
-
Corresponds to the original part in colour: red,
blue -
Name: ANDUR,
KTUSETEMPERATUUR - Manufacturer: EPS
- Voltage [V]: 12
- Sensor Type: Hall Sensor
- Number of pins: 3
- Supplementary Article/Info 2: without cable
- Housing Colour: black
-
Fabrication Number: ECP-
NS- 002 - Manufacturer: NTY
-
Name: NTY ECP-
NS- 002
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Supplementary Article/Supplementary Info: with gasket/
seal - Number of pins: 2
-
Corresponds to the original part in colour: blue,
red - Mounting Type: Vertical Screw Fitting
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PT009107531
Brief Information: *** HELLA Electronics OE competence for over 60 years.
-
for OE number: 23731-
4M500 - Sensor Type: Active sensor
- Manufacturer: KAMOKA
- Engine Code: QG18DE
- Sensor Type: NTC Sensor
-
Thread Size: M12x1,
5 - Spanner Size: 19
- Supplementary Article/Info 2: with seal ring
- Number of pins: 2
- Manufacturer: MEYLE
- Engine Code: QG18DE
- Number of pins: 3
- Voltage [V]: 12
-
Name: ANDUR,
VNTVOLL - Manufacturer: MAX
-
Lisainfo: 24-
0191 -
Additional information: 24-
0191
- Connector Shape: oval
- Number of pins: 3
- Supplementary Article/Info 2: without cable
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Voltage [V]: 12
- Supplementary Article/Supplementary Info: without cable pull
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.04
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Voltage [V]: 12
- Supplementary Article/Supplementary Info: without cable pull
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.04
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV ESEN
- Height [mm]: 37.9
- Sensor Type: Hall Sensor
- Number of connectors: 3
- Manufacturer: VERNET
- Number of pins: 3
- Manufacturer: JPN
- Number of pins: 3
- Connector Shape: oval
- Sensor Type: Hall Sensor
- Fitting Depth [mm]: 37.8
- Supplementary Article/Info 2: without cable
- for OE number: 237314M505
-
Name: Andur,
Nukkvollipositsioon - Manufacturer: MD
- Sensor Type: Hall Sensor
- Mounting Type: Screw Connection
- Shape: oval
- Number of pins: 3
- Supplementary Article/Info 2: with seal ring
- Manufacturer: NRF
-
Name: Andur,
Nukkvollipositsioon - Manufacturer: MAG
- Required quantity: 1
- Sensor Type: Hall Sensor
- Number of connectors: 3
- Manufacturer: ERA
- Engine Code: QG18DE
-
Name: ANDUR,
VNTVOLL - Manufacturer: EPS
- Required quantity: 1
- Voltage [V]: 12
- Number of pins: 3
- Sensor Type: Hall Sensor
- Supplementary Article/Info 2: without cable
- Housing Colour: black
-
Name: CZUJNIK POO½ENIA WAKA ROZRZ. NISSAN 350Z 3,
5 03- - Manufacturer: BRM
- Construction Year from: 09.2000
- Number of pins: 3
- Connector Shape: oval
- Number of mounting bores: 2
- Supplementary Article/Info 2: without cable
- Rotation Direction: Anticlockwise rotation
- for OE number: 2262031U01
-
Name: Andur,
drosselklapiasend - Manufacturer: MD
- Number of pins: 3
- Manufacturer: JPN
-
Oxygen Sensor: Diagnostic Probe,
Thread pre- greased -
Fabrication Number: ESL-
SK- 000 - Manufacturer: NTY
-
Name: NTY ESL-
SK- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of pins: 3
-
Name: ANDUR,
NUKKVOLLIPOSITSIOON - Manufacturer: DLP
- Quality class: PJ
Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"
- Sensor Type: Hall Sensor
- Number of pins: 3
- Supplementary Article/Info 2: with seal ring
- Assy./disassy. by qualified personnel required!:
-
Name: Andur,
Nukkvollipositsioon - Manufacturer: HEL
-
Lisainfo: 6PU013122-
631 -
Additional information: 6PU013122-
631
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Number of connectors: 3
- Weight [kg]: 0.039
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of pins: 3
- Manufacturer: KAVO
- Sensor Type: Hall Sensor
- Number of pins: 3
- Connector Shape: oval
- Supplementary Article/Info 2: without cable
- Manufacturer: VALEO
- Sensor Type: Hall Sensor
- Number of pins: 3
- Connector Shape: oval
- Supplementary Article/Info 2: without cable
- Manufacturer: VALEO
-
Oxygen Sensor: Regulating Probe,
Thread pre- greased - Connector/Clamp: Connector may need adjustment
- Number of circuits: 4
- Fitting Position: before catalytic converter
-
Fabrication Number: ESL-
UV- 000 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of connectors: 3
- Weight [kg]: 0.039
- Observe service information:
-
Name: ANDUR,
VNTVOLL - Manufacturer: BLP
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: QG18DE
- Number of pins: 2
- Manufacturer: ERA
- Number of pins: 3
- Fitting Depth [mm]: 29
-
Name: ANDUR,
VNTVOLL - Manufacturer: TRI
-
Oxygen Sensor: Regulating Probe,
Thread pre- greased -
Fabrication Number: ESL-
NS- 007 - Manufacturer: NTY
Fitting Position: Front, Left Front, Right Front, before catalytic converter
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Oxygen Sensor: Regulating Probe
- Number of circuits: 4
- Manufacturer: KAMOKA
- Oxygen Sensor: Regulating Probe
- Number of circuits: 3
- Manufacturer: KAMOKA
- Sensor Type: Hall Sensor
- Supplementary Article/Info 2: with seal ring
- Number of pins: 3
- Manufacturer: MEYLE
- Oxygen Sensor: Oxygen Sensor
- Voltage [V]: 12
- Number of circuits: 3
- Weight [kg]: 0.08
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: ENERGY
- Sensor Type: Hall Sensor
- Number of pins: 3
- Connector Shape: oval
- Supplementary Article/Info 2: without cable
- Manufacturer: VALEO
-
Fitting Position: Front,
after catalytic converter -
Oxygen Sensor: Diagnostic Probe,
Thread pre- greased -
Fabrication Number: ESL-
NS- 010 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Sensor Type: Hall Sensor
- Number of pins: 3
- Connector Shape: oval
- Supplementary Article/Info 2: without cable
- Name: VA 366170
- Manufacturer: VALEO
- Construction Year to: 09.2000
- Housing Type: with housing
-
Fabrication Number: EPP-
NS- 005 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Housing Type: with housing
-
Fabrication Number: EPP-
NS- 006 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Housing Type: with housing
-
Fabrication Number: EPP-
NS- 005A - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Voltage [V]: 12
- Housing Type: with housing
- Number of pins: 5
- Guarantee: 3 years guarantee
- New Part:
- Used part return not required:
- Weight [kg]: 0.32
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV ESEN
- Oxygen Sensor: Oxygen Sensor
- Voltage [V]: 12
- Guarantee: 3 years guarantee
- Number of circuits: 3
- Weight [kg]: 0.08
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Construction Year from: 10.2000
-
Oxygen Sensor: Regulating Probe,
Finger probe, Heated - Fitting Position: before catalytic converter
- Cable Length [mm]: 325
- Name: Lambda andur
- Manufacturer: DLP
-
Oxygen Sensor: Diagnostic Probe,
Heated - Fitting Position: after catalytic converter
- Number of circuits: 4
- Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: MAX
-
Sensor Type: Hall Sensor,
Active sensor - Number of pins: 3
-
Supplementary Article/Info 2: with seal ring,
without cable - Housing Colour: black
- Number of connectors: 3
- Rated Voltage [V]: 12
- Fitting Depth [mm]: 38
- Weight [kg]: 0.03
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 10.2000
- Number of pins: 5
- Housing Type: with housing
- Manufacturer: JP GROUP
- Lisainfo: Air Mass Sensor
- Additional information: Air Mass Sensor
- Number of pins: 5
- Housing Type: with housing
- Manufacturer: JP GROUP
- Lisainfo: Air Mass Sensor
- Additional information: Air Mass Sensor
- Construction Year from: 10.2000
- Oxygen Sensor: Regulating Probe
- Voltage [V]: 12
- Length [mm]: 350
- Guarantee: 3 years guarantee
- Number of circuits: 3
- Weight [kg]: 0.13
- Resistor [Ohm]: 4.5
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 09SKV722
- Manufacturer: ESEN SKV
- Length [mm]: 445
- Number of circuits: 4
- Conductor Number: 4
- Resistor [Ohm]: 3.5
- Cable Length [mm]: 445
- Oxygen Sensor: Heated
- Manufacturer: MAGNETI MARELLI
- Construction Year from: 10.2000
- Manufacturer: JPN
- Construction Year to: 09.2000
- Oxygen Sensor: Regulating Probe
- Voltage [V]: 12
- Length [mm]: 352
- Guarantee: 3 years guarantee
- Number of circuits: 3
- Weight [kg]: 0.14
- Resistor [Ohm]: 4.5
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV721
- Construction Year to: 09.2000
-
Oxygen Sensor: Heated,
Regulating Probe -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 402
- Weight [kg]: 0.097
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Exhaust System: for pre-
catalytic converter - Quality: OE
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 3
- Weight [g]: 95
- Gross Weight [g]: 144
- Manufacturer: DENSO
- Name: Lambda sensor
- Quality class: Q
Oxygen Sensor: Regulating Probe, Heated, Finger probe, Oxygen Sensor
Additional information: "Tootja: DENSO
ESCORT IV KOMBI (AWF
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
ESCORT IV KOMBI (AWF
(kvaliteediklass: Q)"
- Construction Year from: 10.2000
-
Oxygen Sensor: Diagnostic Probe,
Planar probe, Heated - Fitting Position: after catalytic converter
- Cable Length [mm]: 420
-
Name: DE ES20641-
12B1 - Manufacturer: DELPHI
- Construction Year from: 10.2000
- Quality class: PJ
- Name: Air flow sensor
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Weight [g]: 100
- Gross Weight [g]: 149
- Manufacturer: DENSO
-
Name: DN DOX-
0120 - Quality class: Q
Oxygen Sensor: Diagnostic Probe, Heated, Finger probe, Oxygen Sensor
Additional information: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)"
- Construction Year to: 09.2000
- Quality class: PJ
- Name: Air flow sensor
- Oxygen Sensor: Diagnostic Probe
- Construction Year from: 09.2000
- Engine Code: QG18DE
- Voltage [V]: 12
- Length [mm]: 425
- Guarantee: 3 years guarantee
- Number of circuits: 4
- Weight [kg]: 0.1
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV056
- Construction Year from: 09.2000
-
Fitting Position: Rear,
after catalytic converter -
Line insulation design: with silicone-
coated woven- fibre insulation - Number of pins: 4
- Socket colour: black
- Number of circuits: 4
-
for OE number: 226A0-
7J601 - Connector Shape: angular
-
Thread Size: M18 x 1,
5 - Weight [kg]: 0.139
- Cable Length [mm]: 305
- Length [mm]: 420
-
Oxygen Sensor: Diagnostic Probe,
Thread pre- greased - Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 10.2000
- Manufacturer: JPN
- Construction Year from: 10.2000
- Engine Code: QG18DE
- Voltage [V]: 12
- Number of pins: 5
- Guarantee: 3 years guarantee
- New Part:
- Used part return not required:
- Weight [kg]: 0.06
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 07SKV509
- Manufacturer: ESEN SKV
- Construction Year to: 09.2000
- Voltage [V]: 12
- Housing Type: with housing
- Number of pins: 5
- Guarantee: 3 years guarantee
- New Part:
- Used part return not required:
- Weight [kg]: 0.32
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: ESEN SKV
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
- Construction Year from: 09.2000
-
Fitting Position: Front,
before catalytic converter -
Line insulation design: with silicone-
coated woven- fibre insulation - Number of pins: 3
- Socket colour: blue
- Number of circuits: 3
- Connector Shape: oval
- Cable Length [mm]: 250
-
Thread Size: M18 x 1,
5 - Weight [kg]: 0.116
-
for OE number: 22690-
9F601 - Length [mm]: 330
- Number of connectors: 3
-
Oxygen Sensor: Regulating Probe,
Thread pre- greased - Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 09.2000
- Voltage [V]: 12
- Number of pins: 5
- Guarantee: 3 years guarantee
- New Part:
- Used part return not required:
- Weight [kg]: 0.07
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Engine Code: QG18DE
- Construction Year from: 09.2000
-
Line insulation design: with silicone-
coated woven- fibre insulation - Supplementary Article/Info 2: without plug
- Number of pins: 4
- for OE number: V99760001
- Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Length [mm]: 350
- Fitting Position: after catalytic converter
- Manufacturer: VEMO GERMANY
Oxygen Sensor: Diagnostic Probe, Finger probe, Heated, Thread pre-greased General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: QG18DE
- Construction Year from: 10.2000
- Number of pins: 5
- Name: Ohumassimootja
- Manufacturer: MAX
Manufacturer: BOSCH OSPRZET SILNIK BENZYNOWY
- Engine Code: QG18DE
- Construction Year from: 10.2000
- Number of pins: 5
- for OE number: 226805U400
- Manufacturer: MEAT&DORIA
- Construction Year to: 09.2000
- Fitting Position: after catalytic converter
-
Line insulation design: with silicone-
coated woven- fibre insulation -
Oxygen Sensor: Planar probe,
Heated, Thread pre- greased - Supplementary Article/Info 2: without plug
- Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 09.2000
-
Oxygen Sensor: Diagnostic Probe,
Finger probe, Heated - Cable Length [mm]: 317
- Manufacturer: DELPHI
- Construction Year to: 09.2000
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 3
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Manufacturer: BOSCH
- Construction Year from: 10.2000
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 3
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
- Construction Year from: 09.2000
-
Exhaust System: for pre-
catalytic converter - for OE number: 226909F601
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 390
- Number of pins: 3
- Weight [g]: 92
- Gross Weight [g]: 122
- Manufacturer: DENSO
Oxygen Sensor: Regulating Probe, Heated, Finger probe, Oxygen Sensor
Additional information: "Tootja: DENSO
ALMERA TINO (V10), 0
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
ALMERA TINO (V10), 0
(kvaliteediklass: Q)"
- Construction Year to: 09.2000
- Guarantee: 5 years guarantee
-
General Information: Sold in Hueco brand:
printing and packaging - Name: HU 138977
- Manufacturer: HITACHI
- Construction Year from: 09.2000
- Transmission Type: Manual Transmission
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Length [mm]: 350
- Number of circuits: 3
- Manufacturer: VDO
- Construction Year from: 12.2001
- for OE number: 22680AW400
- Manufacturer: MEAT & DORIA
- Construction Year from: 10.2000
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 3
- Overall Length [mm]: 352
- Available as universal article as well, see article no.: 0258986502
-
Recommended change interval [km]: 160,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
- Construction Year to: 09.2000
- Housing Type: with housing
- Number of pins: 5
- Plug Type: Male
- Housing Colour: black
- Voltage [V]: 12
- Recommended additional repairs: Air Filter
- Name: Ohumassimootja
- Manufacturer: DLP
- Operating Mode: Electric
- Manufacturer: MAGNETI MARELLI
- Construction Year to: 09.2000
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 3
- Overall Length [mm]: 340
- Available as universal article as well, see article no.: 0258986502
-
Recommended change interval [km]: 160,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
- Construction Year to: 09.2000
-
Resistor Type: Hot-
film Sensor - Number of connectors: 5
- Weight [kg]: 0.32
- Housing Type: with housing
-
for OE number: 22680-
7J600 - Manufacturer: BLUE PRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year from: 10.2000
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Number of circuits: 4
- Overall Length [mm]: 445
- Available as universal article as well, see article no.: 0258986506
-
Recommended change interval [km]: 160,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
-
for OE number: 22680-
5U400 - Required quantity: 1
- Voltage [V]: 12
- Number of pins: 5
- Name: OHUMASSIMOOTJA
- Manufacturer: BRM
- Guarantee: 5 years guarantee
-
General Information: Sold in Hueco brand:
printing and packaging -
Name: Andur,
Nukkvollipositsioon - Manufacturer: HUC
-
General Information: Sold in Hitachi brand:
printing and packaging - Manufacturer: HITACHI
- Construction Year from: 09.2000
- Housing Type: with housing
- Number of pins: 5
- Plug Type: Male
- Housing Colour: black
- Voltage [V]: 12
- Recommended additional repairs: Air Filter
-
Name: DE AF10373-
12B1 - Manufacturer: DELPHI
- Construction Year from: 10.2000
-
Mounting Type: Pipe-
neck - Number of pins: 5
- Suction pipe connector diameter [mm]: 68
- Assy./disassy. by qualified personnel required!:
- Name: OHUMASSIMOOTJA
- Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Construction Year from: 09.2000
-
Resistor Type: Hot-
film Sensor - Number of connectors: 5
- Weight [kg]: 0.35
- Housing Type: with housing
-
for OE number: 22680-
5U400 - Manufacturer: BLUEPRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 226805U400
- Guarantee: 5 years guarantee
-
General Information: Sold in Hueco brand:
printing and packaging - Manufacturer: HITACHI
- Construction Year from: 10.2000
- Recommended additional repairs: Air Filter
- Name: OHUMASSIMOOTJA
- Manufacturer: BOS
- Construction Year to: 09.2000
- Recommended additional repairs: Air Filter
- Manufacturer: BOSCH
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks