• Construction Year to: 10.2000
• Exhaust System: for pre-catalytic converter
• for OE number: 226909F600
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 380
• Number of pins: 3
• Weight [g]: 96
• Gross Weight [g]: 126
• Manufacturer: DENSO
• Name: DN DOX-1378

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
ALMERA TINO (V10), 0
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ALMERA TINO (V10), 0
(kvaliteediklass: Q)"

• Construction Year from: 06.2003
• Transmission Type: Manual Transmission
• for OE number: 226A0AU011
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 370
• Number of pins: 4
• Weight [g]: 96
• Gross Weight [g]: 126
• Manufacturer: DENSO
• Name: DN DOX-1380

Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
ALMERA TINO (V10), 0
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ALMERA TINO (V10), 0
(kvaliteediklass: Q)"

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Connector/Clamp: Connector may need adjustment
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-UV-000
• Manufacturer: NTY

• Construction Year from: 03.2003
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Fabrication Number: ESL-NS-004
• Manufacturer: NTY

Fitting Position: Left Front, Right Front, before catalytic converter

• Construction Year from: 11.2000
• Construction Year to: 02.2003
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Fabrication Number: ESL-NS-007
• Manufacturer: NTY

Fitting Position: Front, Left Front, Right Front, before catalytic converter

• Number of circuits: 3
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Construction Year to: 11.2000
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 3
• Weight [kg]: 0.08
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV903

• Construction Year to: 01.2003
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: Exhaust Manifold
• Number of pins: 3
• Cable Length [mm]: 230
• for article number: 81014E
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Construction Year from: 03.2003
• Construction Year to: 12.2005
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 430
• Name: Lambda andur
• Manufacturer: MAX

• Construction Year from: 11.2000
• Fitting Position: Left, Right, Front, before catalytic converter
• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Cable Length [mm]: 325
• Name: Lambda andur
• Manufacturer: DLP

• Construction Year from: 12.2000
• Construction Year to: 02.2003
• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.14
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV433

• Construction Year from: 07.2003, 03.2003
• Construction Year to: 12.2005, 06.2003
• Lambda Sensor: Diagnostic Probe, Regulating Probe, Finger probe
• Transmission Type: Automatic Transmission, Manual Transmission
• Block Separation:
• for OE number: 226A0AU011
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

Fitting Position: before catalytic converter, after catalytic converter

• Construction Year from: 06.2003
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0119
• Quality class: Q

Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)"

• Fitting Position: Front, after catalytic converter
• Construction Year from: 12.2000
• Construction Year to: 02.2003
• Length [mm]: 305
• Thread Size: M18x1.5mm
• Number of pins: 4
• Lambda Sensor: Heated
• Manufacturer: KAVO

• Construction Year from: 11.2000
• Construction Year to: 02.2003
• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 350
• Number of circuits: 3
• Weight [kg]: 0.13
• Resistor [Ohm]: 4.5
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV722
• Manufacturer: ESEN SKV

• Construction Year to: 10.2000
• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 352
• Number of circuits: 3
• Weight [kg]: 0.14
• Resistor [Ohm]: 4.5
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV721

• Construction Year from: 06.2003
• Transmission Type: Manual Transmission
• Lambda Sensor: Diagnostic Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 370
• Weight [kg]: 0.095
• Name: SW 33 10 3136
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 500
• Conductor Number: 4
• Resistor [Ohm]: 9
• Number of circuits: 4
• Cable Length [mm]: 500
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Construction Year to: 02.2003
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 3
• Weight [g]: 95
• Gross Weight [g]: 144
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
ESCORT IV KOMBI (AWF
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ESCORT IV KOMBI (AWF
(kvaliteediklass: Q)"

• Lambda Sensor: Regulating Probe
• Number of pins: 4
• Cable Length [mm]: 820
• Manufacturer: MEAT&DORIA

• Construction Year to: 11.2000
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 100
• Gross Weight [g]: 149
• Manufacturer: DENSO
• Name: DN DOX-0120
• Quality class: Q

Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)"

• Construction Year to: 11.2000
• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 370
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV732

• Engine Code: QG18DE
• Construction Year from: 03.2003
• Fitting Position: Left, Right, Front, before catalytic converter
• Cable Length [mm]: 400
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased

• Resistor [Ohm]: 9
• Conductor Number: 4
• Length [mm]: 470
• Number of circuits: 4
• Cable Length [mm]: 470
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG
• Lisainfo: OSM041
• Additional information: OSM041

• Fitting Position: Front
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 3
• Socket colour: blue
• Number of circuits: 3
• Connector Shape: oval
• Cable Length [mm]: 250
• Thread Size: M18 x 1,5
• Weight [kg]: 0.116
• for OE number: 22690-9F601
• Length [mm]: 330
• Number of connectors: 3
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Exhaust System: before catalytic converter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 12.2000
• Construction Year to: 02.2003
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 03.2003
• Fitting Position: Left, Right, Front, before catalytic converter
• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Cable Length [mm]: 470
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Construction Year from: 10.2000
• Construction Year to: 02.2003
• Exhaust System: for pre-catalytic converter
• for OE number: 226909F601
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 390
• Number of pins: 3
• Weight [g]: 92
• Gross Weight [g]: 122
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
ALMERA TINO (V10), 0
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ALMERA TINO (V10), 0
(kvaliteediklass: Q)"

• Construction Year from: 06.2003
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 02.2003
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Construction Year to: 10.2000
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 3
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH

• Construction Year from: 07.2003, 03.2003
• Construction Year to: 12.2005, 06.2003
• Lambda Sensor: Diagnostic Probe, Regulating Probe
• Transmission Type: Automatic Transmission
• Block Separation:
• for OE number: 226A0AU011
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: after catalytic converter, before catalytic converter

• Construction Year from: 11.2000
• Construction Year to: 02.2003
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 3
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 10.2000
• Transmission Type: Manual Transmission
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Length [mm]: 390
• Number of circuits: 3
• Manufacturer: VDO

• Construction Year from: 03.2003
• Construction Year to: 12.2005
• Lambda Sensor: Regulating Probe
• Length [mm]: 400
• Technical Information Number: Universal 77015
• Fitting Position: before catalytic converter
• Manufacturer: FAE

• Construction Year from: 07.2003
• Construction Year to: 12.2005
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• for OE number: 226A0AU011
• Number of circuits: 4
• Overall Length [mm]: 500
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Construction Year from: 08.2002
• Line insulation design: with silicone-coated woven-fibre insulation
• Weight [kg]: 0.139
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 06.2003
• Lambda Sensor: Diagnostic Probe, Heated
• Number of pins: 4
• Quality: Zr insulated gnd, OE EQUIVALENT
• Cable Length [mm]: 230
• Manufacturer: MEAT&DORIA

• Construction Year from: 11.2000
• Construction Year to: 02.2003
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 3
• Overall Length [mm]: 352
• Available as universal article as well, see article no.: 0258986502
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 02.2003
• for OE number: 22690AU000, 226908U300
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 470
• Number of pins: 4
• Weight [g]: 100
• Gross Weight [g]: 133
• Manufacturer: DENSO
• Name: DN DOX-2014
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
ALMERA II HATCHBACK
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ALMERA II HATCHBACK
(kvaliteediklass: Q)"

• Construction Year to: 10.2000
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 3
• Overall Length [mm]: 340
• Available as universal article as well, see article no.: 0258986502
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 03.2003
• Construction Year to: 12.2005
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 430
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda Sensor: Regulating Probe
• Construction Year from: 08.2002
• Number of pins: 4
• Cable Length [mm]: 350
• Manufacturer: METZGER