• Construction Year to: 10.2000
• for OE number: 226A05M300
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 290
• Number of pins: 4
• Weight [g]: 99
• Gross Weight [g]: 129
• Manufacturer: DENSO

Oxygen Sensor: Diagnostic Probe, Heated, Finger probe, Oxygen Sensor Additional information: "Tootja: DENSO
ALMERA TINO (V10), 0
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ALMERA TINO (V10), 0
(kvaliteediklass: Q)"

• Construction Year from: 08.2002
• for OE number: 226A0AU011
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 370
• Number of pins: 4
• Weight [g]: 96
• Gross Weight [g]: 126
• Manufacturer: DENSO

Oxygen Sensor: Diagnostic Probe, Heated, Finger probe, Oxygen Sensor Additional information: "Tootja: DENSO
ALMERA TINO (V10), 0
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ALMERA TINO (V10), 0
(kvaliteediklass: Q)"

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Connector/Clamp: Connector may need adjustment
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-UV-000
• Manufacturer: NTY

• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Fabrication Number: ESL-NS-004
• Manufacturer: NTY

Fitting Position: Left Front, Right Front, before catalytic converter

• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Fabrication Number: ESL-NS-007
• Manufacturer: NTY

Fitting Position: Front, Left Front, Right Front, before catalytic converter

• Number of circuits: 4
• Oxygen Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Number of circuits: 3
• Oxygen Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Fitting Position: Front, after catalytic converter
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-NS-010
• Manufacturer: NTY

• Construction Year from: 04.2001
• Oxygen Sensor: Regulating Probe, Finger probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 325
• Manufacturer: DELPHI

• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.14
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV904
• Manufacturer: ESEN SKV

• Construction Year from: 08.2002
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0119
• Quality class: Q

Oxygen Sensor: Diagnostic Probe, Heated, Finger probe, Oxygen Sensor Additional information: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)"

• Construction Year from: 08.2002
• Oxygen Sensor: Diagnostic Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 370
• Weight [kg]: 0.095
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 10.2000
• Oxygen Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 370
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV732
• Manufacturer: ESEN SKV

• Construction Year from: 11.2000
• Construction Year to: 07.2002
• Oxygen Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 350
• Guarantee: 3 years guarantee
• Number of circuits: 3
• Weight [kg]: 0.13
• Resistor [Ohm]: 4.5
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV722
• Manufacturer: ESEN SKV

• Fitting Position: Front, after catalytic converter
• Construction Year from: 11.2000
• Construction Year to: 09.2001
• Length [mm]: 305
• Thread Size: M18x1.5mm
• Number of pins: 4
• Oxygen Sensor: Heated
• Manufacturer: KAVO

• Construction Year to: 10.2000
• Oxygen Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 352
• Guarantee: 3 years guarantee
• Number of circuits: 3
• Weight [kg]: 0.14
• Resistor [Ohm]: 4.5
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV721

• Conductor Number: 4
• Length [mm]: 445
• Number of circuits: 4
• Resistor [Ohm]: 3.5
• Cable Length [mm]: 445
• Oxygen Sensor: Heated
• Manufacturer: MAGNETI MARELLI

• Construction Year from: 08.2002
• Oxygen Sensor: Diagnostic Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 370
• Weight [kg]: 0.095
• Name: SW 33 10 3136
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 10.2000
• Vehicle Identification Number (VIN): SJN**************
• Oxygen Sensor: Heated, Regulating Probe
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 402
• Weight [kg]: 0.097
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 08.2002
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 3
• Weight [g]: 95
• Gross Weight [g]: 144
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Oxygen Sensor: Regulating Probe, Heated, Finger probe, Oxygen Sensor Additional information: "Tootja: DENSO
ESCORT IV KOMBI (AWF
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ESCORT IV KOMBI (AWF
(kvaliteediklass: Q)"

• Construction Year from: 10.2001
• Oxygen Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 420
• Name: DE ES20641-12B1
• Manufacturer: DELPHI

• Oxygen Sensor: Diagnostic Probe, Regulating Probe
• Construction Year from: 11.2000
• Engine Code: QG18DE
• Voltage [V]: 12
• Length [mm]: 425
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.1
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV056

• Oxygen Sensor: Regulating Probe
• Construction Year from: 08.2002
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Weight [kg]: 0.11
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV103

• Construction Year from: 09.2001
• Construction Year to: 08.2002
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 100
• Gross Weight [g]: 149
• Manufacturer: DENSO
• Name: DN DOX-0120
• Quality class: Q

Oxygen Sensor: Diagnostic Probe, Heated, Finger probe, Oxygen Sensor Additional information: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)"

• Construction Year from: 08.2002
• Oxygen Sensor: Regulating Probe, Heated
• Voltage [V]: 12
• Length [mm]: 401
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.12
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV683

• Oxygen Sensor: Diagnostic Probe
• Number of pins: 4
• Cable Length [mm]: 350
• for OE number: 226A07J601
• Manufacturer: MEAT&DORIA

• Resistor [Ohm]: 9
• Number of circuits: 4
• Conductor Number: 4
• Length [mm]: 500
• Cable Length [mm]: 500
• Oxygen Sensor: Heated
• Name: MM OSM038
• Manufacturer: MAGNETI MARELLI

• Engine Code: QG18DE
• Construction Year from: 09.2002
• Fitting Position: before catalytic converter
• Cable Length [mm]: 400
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: EP 1.998.304
• Manufacturer: EPS

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased

• Construction Year from: 09.2002
• Oxygen Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 380
• Manufacturer: DELPHI
• Name: DE ES20220-12B1

• Fitting Position: Front, before catalytic converter
• Construction Year from: 09.2002
• Length [mm]: 430
• Thread Size: M18x1.5mm
• Number of pins: 4
• Oxygen Sensor: Planar probe
• Manufacturer: KAVO

• Construction Year from: 11.2000
• Construction Year to: 07.2002
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986506

• Vehicle Identification Number (VIN): SJN
• Fitting Position: Exhaust Manifold
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 3
• Socket colour: blue
• Number of circuits: 3
• Connector Shape: oval
• Cable Length [mm]: 250
• Thread Size: M18 x 1,5
• Weight [kg]: 0.116
• for OE number: 22690-9F601
• Length [mm]: 330
• Number of connectors: 3
• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Exhaust System: before catalytic converter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: QG18DE
• Construction Year from: 09.2002
• Fitting Position: after catalytic converter
• Cable Length [mm]: 300
• Conductor Number: 4
• Supplementary Article/Info 2: with fastening material
• Available as universal article as well, see article no.: 1.997.008
• Number of circuits: 4
• Manufacturer: EPS

Oxygen Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Engine Code: QG18DE
• Vehicle Production Country: Great Britain
• Construction Year from: 09.2001
• Construction Year to: 08.2002
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

Oxygen Sensor: Diagnostic Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 09.2002
• Oxygen Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 470
• Manufacturer: DELPHI
• Name: Lambda sensor
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Construction Year from: 02.2000
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Oxygen Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 10.2000
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 3
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH

• Construction Year from: 11.2000
• Construction Year to: 07.2002
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 3
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH

• Construction Year from: 10.2000
• Construction Year to: 08.2002
• Exhaust System: for pre-catalytic converter
• for OE number: 226909F601
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 390
• Number of pins: 3
• Weight [g]: 92
• Gross Weight [g]: 122
• Manufacturer: DENSO

Oxygen Sensor: Regulating Probe, Heated, Finger probe, Oxygen Sensor Additional information: "Tootja: DENSO
ALMERA TINO (V10), 0
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ALMERA TINO (V10), 0
(kvaliteediklass: Q)"

• Construction Year from: 09.2002
• Number of pins: 4
• Cable Length [mm]: 400
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: rectangular
• Weight [kg]: 0.05
• Name: VA 368012
• Manufacturer: VALEO

Oxygen Sensor: Regulating Probe, Planar probe, Thread pre-greased, Heated Fitting Position: before catalytic converter, after catalytic converter

• Construction Year from: 10.2000
• Construction Year to: 08.2002
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Length [mm]: 350
• Number of circuits: 3
• Manufacturer: VDO

• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Construction Year from: 08.2002
• Line insulation design: with silicone-coated woven-fibre insulation
• Weight [kg]: 0.139
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 08.2002
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Length [mm]: 470
• Number of circuits: 4
• Manufacturer: VDO

• Construction Year from: 11.2000
• Construction Year to: 07.2002
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 3
• Overall Length [mm]: 352
• Available as universal article as well, see article no.: 0258986502
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

• Construction Year to: 10.2000
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 3
• Overall Length [mm]: 340
• Available as universal article as well, see article no.: 0258986502
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

• Construction Year from: 11.2000
• Construction Year to: 07.2002
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 445
• Available as universal article as well, see article no.: 0258986506
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

• Engine Code: QG18DE
• Construction Year from: 08.2002
• Oxygen Sensor: Diagnostic Probe, Heated
• Voltage [V]: 12
• Conductor Number: 1
• Cable Length [mm]: 350
• Manufacturer: PIERBURG

• Oxygen Sensor: Regulating Probe
• Construction Year from: 08.2002
• Number of pins: 4
• Cable Length [mm]: 350
• Manufacturer: METZGER