• Number of pins: 4
• Housing Type: without housing
• Lisainfo: Air Mass Sensor
• Additional information: Air Mass Sensor

• Number of pins: 2
• Corresponds to the original part in colour: white, blue
• Connector Shape: oval
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 19 mm
• Manufacturer: MEAT&DORIA

• Construction Year from: 10.2003
• Colour: black
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Fabrication Number: ESS-NS-003
• Manufacturer: NTY

• Engine Code: QR25DE
• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: M 12x1,5
• Spanner Size: 19 mm
• Manufacturer: MEAT&DORIA

• Engine Code: QR25DE
• Housing Colour: blue
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: red, blue
• Name: ANDUR, KšTUSETEMPERATUUR
• Manufacturer: EPS

• Construction Year to: 12.2006
• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Connector Shape: oval
• Name: Andur, v„ntvoll
• Manufacturer: MAX

• Housing Colour: light blue
• Manufacturer: FAE

• Fabrication Number: ESS-NS-005
• Manufacturer: NTY

• Number of pins: 2
• Connector Shape: oval
• Socket colour: red
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 19
• for OE number: 22630 71L00
• Manufacturer: MEAT&DORIA

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BRM

Name: CZUJNIK POO½ENIA WAU KORB. NISSAN X-TRAIL 2.5 03-

• Alternatively:
• Number of pins: 2
• Alternative Repair Kit: 551290
• Manufacturer: ERA

• Lambda Sensor: Lambda Sensor, Thread pre-greased
• Fabrication Number: ESL-UV-001
• Manufacturer: NTY
• Name: NTY ESL-UV-001

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Number of circuits: 4
• Fitting Position: after catalytic converter
• Fabrication Number: ESL-NS-020
• Manufacturer: NTY

• Housing Type: with housing
• Fabrication Number: EPP-NS-002A
• Manufacturer: NTY

• Construction Year to: 09.2003
• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE AS10212

• Construction Year from: 10.2003
• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE AS10196

• Lambda Sensor: Regulating Probe, Heated, Thread pre-greased
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-NS-019
• Manufacturer: NTY

Manufacturer: MAGNETI MARELLI

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Housing Type: without housing
• Fabrication Number: EPP-NS-007
• Manufacturer: NTY

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Number of connectors: 3
• Weight [kg]: 0.04
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 3
• Weight [kg]: 0.04
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 09.2003
• Number of connectors: 2
• Colour: black
• Operating Mode: Electric
• Weight [kg]: 0.045
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Fitting Depth [mm]: 38.2
• Name: ANDUR, VŽNTVOLL
• Manufacturer: TRI

Manufacturer: MAGNETI MARELLI

• Engine Code: QR25DE
• Construction Year to: 09.2003
• Manufacturer: EPS

• Number of pins: 2
• Manufacturer: ERA

• Housing Colour: black
• Number of pins: 2
• Manufacturer: FAE

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.14
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.12
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV121
• Manufacturer: ESEN SKV

• Fabrication Number: EPP-NS-019
• Manufacturer: NTY

• Construction Year to: 03.2007
• Lambda Sensor: Diagnostic Probe, Finger probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Construction Year to: 03.2007
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0119
• Quality class: Q

Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)"

• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 09.2003
• Supplementary Article/Supplementary Info: without suction pipe
• Number of pins: 5
• Quality class: PJ
• Name: Air flow sensor

• Number of pins: 5
• Housing Type: without housing
• Manufacturer: JP GROUP
• Lisainfo: Air Mass Sensor
• Additional information: Air Mass Sensor

• Lambda Sensor: Regulating Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 370
• Weight [kg]: 0.095
• Name: SW 33 10 3136
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Regulating Probe
• Number of pins: 4
• Cable Length [mm]: 820
• Manufacturer: MEAT&DORIA

• Construction Year to: 03.2007
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 95
• Gross Weight [g]: 139
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
MONDEO I SEDAN (GBP)
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
MONDEO I SEDAN (GBP)
(kvaliteediklass: Q)"

• Lambda Sensor: Regulating Probe, Heated
• Voltage [V]: 12
• Length [mm]: 401
• Number of circuits: 4
• Weight [kg]: 0.12
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV683

• Construction Year to: 03.2007
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Fitting Position: before catalytic converter
• Block Separation:
• Catalytic Converter Type: with three-way catalytic converter
• Exhaust System: for pre-catalytic converter
• Cable Length [mm]: 370
• Manufacturer: DELPHI
• Name: DE ES10880-12B1

• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 315
• Number of circuits: 4
• Weight [kg]: 0.12
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV692

• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 500
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

Manufacturer: MAGNETI MARELLI

• Engine Code: QR25DE
• Voltage [V]: 12
• Weight [kg]: 0.11
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Supplementary Article/Supplementary Info: without suction pipe
• for article number: 86286E
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

Manufacturer: JAPKO

• Engine Code: QR25DE
• Construction Year to: 09.2003
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Construction Year to: 03.2007
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 490
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

• Construction Year to: 03.2007
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 09.2003
• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 5
• Weight [kg]: 0.3
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 07SKV110
• Manufacturer: ESEN SKV

• Operating Mode: Electric
• Name: OHUMASSIMOOTJA
• Manufacturer: MAG
• Lisainfo: AMMQ19696
• Additional information: AMMQ19696

• Housing Type: without housing
• Number of pins: 5
• Connector Shape: oval
• Recommended additional repairs: Air Filter
• Supplementary Article/Info 2: Can only be fitted with original mounting
• New Part:
• Used part return not required:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Housing Type: without housing
• Number of pins: 5
• Manufacturer: ERA

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Line insulation design: with silicone-coated woven-fibre insulation
• Weight [kg]: 0.139
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 03.2007
• Lambda Sensor: Diagnostic Probe, Heated
• Number of pins: 4
• Quality: Zr insulated gnd, OE EQUIVALENT
• Cable Length [mm]: 230
• Manufacturer: MEAT&DORIA

• Construction Year to: 03.2007
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 410
• Available as universal article as well, see article no.: 0258986507
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Manufacturer: BREMI

• Lambda Sensor: Regulating Probe
• Number of pins: 4
• Cable Length [mm]: 350
• Manufacturer: METZGER

• Housing Type: without housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI

• Mounting Type: Bolted
• Number of pins: 5
• Supplementary Article/Supplementary Info: without suction pipe
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 8ET009142761

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 6
• Connector Shape: oval
• Sensor Type: Slider
• Supplementary Article/Info 2: without cable
• Number of mounting bores: 2
• for OE number: 18919-5Y700
• Manufacturer: MEAT&DORIA

• Construction Year to: 03.2007
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Fitting Position: Exhaust Manifold
• Line insulation design: with silicone-coated woven-fibre insulation
• Connector Shape: D Shape
• Conductor Number: 4
• Exhaust System: after catalytic converter
• Cable Length [mm]: 450
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 09.2003
• Supplementary Article/Supplementary Info: without suction pipe
• for OE number: 22680-7S000
• Quality: OE
• Operating Mode: Electric
• Number of pins: 5
• Gross Weight [g]: 66
• Manufacturer: DENSO
• Name: DN DMA-0203

Additional information: "Tootja: DENSO
TEANA II (J32), 07.0
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
TEANA II (J32), 07.0
(kvaliteediklass: Q)"

• Construction Year from: 10.2003
• Construction Year to: 03.2007
• Recommended additional repairs: Air Filter
• Manufacturer: BOSCH

• Engine Code: QR25DE
• Colour: chrome/black
• Name: Ohumassimootja
• Manufacturer: VDO

• Engine Code: QR25DE
• Operating Mode: Electric
• Voltage [V]: 12
• Name: OHUMASSIMOOTJA
• Manufacturer: PIE

• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Name: OHUMASSIMOOTJA
• Manufacturer: HUC

• Construction Year from: 09.2003
• Supplementary Article/Supplementary Info: with suction pipe
• for OE number: 22680-CA000
• Quality: OE
• Operating Mode: Electric
• Number of pins: 5
• Gross Weight [g]: 314
• Manufacturer: DENSO
• Name: Air flow sensor
• Quality class: Q

Additional information: "Tootja: DENSO
PRIMERA KOMBI (WP12)
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
PRIMERA KOMBI (WP12)
(kvaliteediklass: Q)"