• Engine Code: QR20DE
• Thread Size: 1/8 GAS
• Spanner Size: 27
• Number of pins: 1
• Manufacturer: KAVO

• Fabrication Number: ECT-RE-003
• Manufacturer: NTY
• Name: NTY ECT-RE-003

• Thread Size: 1/8x28h'' BSP
• Housing Colour: black
• Manufacturer: FAE

• Connector Shape: rectangular
• Operating Mode: Hydraulic
• Colour: black
• Number of pins: 1
• Shifting Points [bar]: 0.2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Switch Pressure [bar]: 0.2
• Thread Size: 1/8x27 NPTF
• Sensor Type: Closed-type Sensor
• Manufacturer: VERNET

• Pressure [bar]: 0.2
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Number of pins: 1
• Housing Colour: black
• Technical Information Number: circuit N.C.
• Manufacturer: ERA

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: oval
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 2345012920
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: oval
• Number of pins: 2
• Socket colour: black
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 22630D9701
• Manufacturer: NRF

• Construction Year from: 10.2003
• Colour: black
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Fabrication Number: ESS-NS-003
• Manufacturer: NTY

• Thread Size: M12x1.5
• Manufacturer: VERNET

• Engine Code: QR20DE
• Construction Year from: 02.2005
• Construction Year to: 03.2007
• Manufacturer: BOSCH

• Housing Colour: blue
• Number of pins: 2
• Thread Size: M 12X1.5-6g
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: DLP

• Connector Shape: oval
• Number of pins: 2
• Colour Coding: blue
• Sensor Type: NTC Sensor
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: QR20DE
• Housing Colour: blue
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: red, blue
• Name: ANDUR, KšTUSETEMPERATUUR
• Manufacturer: EPS

• Sensor Type: Hall Sensor
• Number of pins: 3
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of pins: 2
• Connector Shape: oval
• Manufacturer: ERA

• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Corresponds to the original part in colour: blue, red
• Mounting Type: Vertical Screw Fitting
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009107531

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fabrication Number: ECP-NS-011
• Manufacturer: NTY

Fabrication Number: ESS-NS-005

• Engine Code: QR20DE
• Pressure [bar]: 0
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Name: EP 1.800.166
• Manufacturer: EPS

• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Fitting Depth [mm]: 38
• Name: Andur, v„ntvoll
• Manufacturer: MD

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BRM

Name: CZUJNIK POO½ENIA WAU KORB. NISSAN X-TRAIL 2.5 03-

• Alternatively:
• Number of pins: 2
• Alternative Repair Kit: 551290
• Manufacturer: ERA

• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Connector Shape: oval
• Name: Andur, v„ntvoll
• Manufacturer: MAX

• Lambda Sensor: Lambda Sensor, Thread pre-greased
• Fabrication Number: ESL-UV-001
• Manufacturer: NTY

• Construction Year from: 04.2006
• Number of pins: 3
• Manufacturer: KAVO

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Number of circuits: 4
• Fitting Position: after catalytic converter
• Fabrication Number: ESL-NS-020
• Manufacturer: NTY

• Construction Year to: 09.2003
• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE AS10212

• Construction Year from: 10.2003
• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE AS10196

• Construction Year to: 03.2006
• Engine Code: QR20DE
• Number of pins: 3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: DLP

• Lambda Sensor: Regulating Probe, Heated, Thread pre-greased
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-NS-019
• Manufacturer: NTY

Manufacturer: MAGNETI MARELLI

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Housing Type: without housing
• Fabrication Number: EPP-NS-007
• Manufacturer: NTY

• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Construction Year to: 03.2007
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.04
• Manufacturer: VALEO

• Construction Year from: 09.2003
• Number of connectors: 2
• Colour: black
• Operating Mode: Electric
• Weight [kg]: 0.045
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Fitting Depth [mm]: 38.2
• Name: ANDUR, VŽNTVOLL
• Manufacturer: TRI

Manufacturer: MAGNETI MARELLI

• Number of pins: 2
• Manufacturer: ERA

• Alternatively:
• Number of pins: 3
• Alternative Repair Kit: 550539
• Fitting Depth [mm]: 38
• Manufacturer: ERA

• Engine Code: QR20DE
• Construction Year from: 10.2003
• Name: EP 1.957.113
• Manufacturer: EPS

• Construction Year from: 07.2003, 02.2005
• Construction Year to: 08.2007
• Fitting Position: before catalytic converter
• Block Separation:
• Engine Code: QR20DE
• Lambda Sensor: Lambda Sensor
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.12
• Warranty: 3 years warranty
• Name: CE 09SKV121
• Manufacturer: ESEN SKV

• Fabrication Number: EPP-NS-019
• Manufacturer: NTY

• Engine Code: QR20DE
• Construction Year from: 02.2005
• Fitting Position: after catalytic converter
• Lambda Sensor: Finger probe
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0119

Lambda Sensor: Diagnostic Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)"

• Construction Year from: 09.2003
• Supplementary Article/Supplementary Info: without suction pipe
• Number of pins: 5
• Quality class: PJ
• Name: Air flow sensor

• Construction Year from: 04.2006
• Construction Year to: 11.2006
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 5
• Housing Type: without housing
• Manufacturer: JP GROUP
• Lisainfo: Air Mass Sensor
• Additional information: Air Mass Sensor

• Lambda Sensor: Regulating Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 370
• Weight [kg]: 0.095
• Name: SW 33 10 3136
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 95
• Gross Weight [g]: 139
• Manufacturer: DENSO
• Name: DN DOX-0121

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
MONDEO I SEDAN (GBP)
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
MONDEO I SEDAN (GBP)
(kvaliteediklass: Q)"

Manufacturer: MAGNETI MARELLI

• Construction Year from: 09.2001
• Construction Year to: 02.2007
• Lambda Sensor: Regulating Probe, Heated
• Voltage [V]: 12
• Length [mm]: 401
• Number of circuits: 4
• Weight [kg]: 0.12
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV683

• Construction Year from: 09.2001
• Construction Year to: 02.2007
• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 315
• Number of circuits: 4
• Weight [kg]: 0.12
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV692

• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Fitting Position: before catalytic converter
• Block Separation:
• Engine Code: QR20DE
• Cable Length [mm]: 370
• Manufacturer: DELPHI

• Construction Year from: 07.2003, 02.2005
• Construction Year to: 08.2007, 03.2007
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Block Separation:
• Engine Code: QR20DE
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 500
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY

• Lambda Sensor: Lambda Sensor
• Cable Length [mm]: 290
• Alternatively:
• Number of circuits: 4
• Alternative Repair Kit: 570112
• Manufacturer: ERA

Vehicle Equipment: for vehicles with hydraulic power steering

• Fabrication Number: ECC-NS-001
• Manufacturer: NTY

• Construction Year from: 10.2001
• Voltage [V]: 12
• Weight [kg]: 0.11
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY

• Construction Year from: 10.2001
• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: QR20DE
• Construction Year from: 02.2005
• Construction Year to: 03.2007
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 09.2003
• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 5
• Weight [kg]: 0.3
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 07SKV110

• Engine Code: QR20DE
• Construction Year from: 02.2005
• Construction Year to: 03.2007
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 490
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

• Construction Year to: 06.2003
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Required quantity: 2
• Number of circuits: 3
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Housing Type: without housing
• Number of pins: 5
• Connector Shape: oval
• Recommended additional repairs: Air Filter
• Supplementary Article/Info 2: Can only be fitted with original mounting
• New Part:
• Used part return not required:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Line insulation design: with silicone-coated woven-fibre insulation
• Weight [kg]: 0.139
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Diagnostic Probe, Heated
• Exhaust System: after catalytic converter
• Number of pins: 4
• Quality: Zr insulated gnd, OE EQUIVALENT
• Cable Length [mm]: 230
• Manufacturer: MEAT&DORIA

• Construction Year from: 07.2003, 02.2005
• Construction Year to: 08.2007, 03.2007
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Block Separation:
• Engine Code: QR20DE
• Number of circuits: 4
• Overall Length [mm]: 410
• Available as universal article as well, see article no.: 0258986507
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

• Lambda Sensor: Regulating Probe
• Number of pins: 4
• Cable Length [mm]: 350
• Manufacturer: METZGER

• Housing Type: without housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI

• Engine Code: QR20DE
• Lambda Sensor: Regulating Probe, Heated
• Voltage [V]: 12
• Conductor Number: 1
• Cable Length [mm]: 350
• Name: LAMBDA ANDUR
• Manufacturer: PIE

• Mounting Type: Bolted
• Number of pins: 5
• Supplementary Article/Supplementary Info: without suction pipe
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 8ET009142761

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Fitting Position: Exhaust Manifold
• Line insulation design: with silicone-coated woven-fibre insulation
• Connector Shape: D Shape
• Conductor Number: 4
• Exhaust System: after catalytic converter
• Cable Length [mm]: 450
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: QR20DE
• Construction Year from: 02.2005
• Construction Year to: 03.2007
• Recommended additional repairs: Air Filter
• Name: Ohumassimootja
• Manufacturer: BOS

• Construction Year from: 09.2003
• Supplementary Article/Supplementary Info: without suction pipe
• for OE number: 22680-7S000
• Quality: OE
• Operating Mode: Electric
• Number of pins: 5
• Gross Weight [g]: 66
• Manufacturer: DENSO
• Name: DN DMA-0203

Additional information: "Tootja: DENSO
TEANA II (J32), 07.0
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
TEANA II (J32), 07.0
(kvaliteediklass: Q)"

• Engine Code: QR20DE
• Colour: chrome/black
• Name: Ohumassimootja
• Manufacturer: VDO

• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Name: OHUMASSIMOOTJA
• Manufacturer: HUC

• Construction Year from: 09.2003
• Supplementary Article/Supplementary Info: with suction pipe
• for OE number: 22680-CA000
• Quality: OE
• Operating Mode: Electric
• Number of pins: 5
• Gross Weight [g]: 314
• Manufacturer: DENSO
• Name: Air flow sensor
• Quality class: Q

Additional information: "Tootja: DENSO
PRIMERA KOMBI (WP12)
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
PRIMERA KOMBI (WP12)
(kvaliteediklass: Q)"