• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Välisläbimõõt [mm]: 52
• Siseläbimõõt [mm]: 25
• Laius (mm): 37
• Manufacturer: JP GROUP
• Lisainfo: Wheel Bearing Kit
• Additional information: Wheel Bearing Kit

• Laius (mm): 72
• Siseläbimõõt [mm]: 37
• Välisläbimõõt [mm]: 72
• Installatsiooni pool: esisild vasakul, esisild paremal
• Piirangutega toode/piirangu info 2: koos ABS-andurirõngaga
• Lisainfo: Wheel Bearing Kit
• Additional information: Wheel Bearing Kit

• Fitting Position: Rear Axle both sides
• Height [mm]: 37
• Inner Diameter [mm]: 25
• Outer Diameter [mm]: 52
• Manufacturer: JPN

• Fitting Position: Rear Axle
• Fabrication Number: KLT-NS-071
• Rim Size [inch]: 16.0
• Manufacturer: NTY
• Name: NTY KLT-NS-071

• Fitting Position: Rear Axle
• for model code: K12E
• Width [mm]: 37
• Inner Diameter [mm]: 25
• Outer Diameter [mm]: 52
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle
• Inner Diameter [mm]: 25
• Outer Diameter [mm]: 52
• Width [mm]: 37
• Version: Two
• Manufacturer: JAPKO

• Fitting Position: Rear Axle
• Inner Diameter [mm]: 25
• Outer Diameter [mm]: 52
• Width [mm]: 37
• Version: Two
• Manufacturer: ASHIKA

• Fitting Position: Rear Axle
• Laius (mm): 37
• Siseläbimõõt [mm]: 25
• Välisläbimõõt [mm]: 52
• Piirangutega toode/piirangu info 2: ilma integreeritud ABS-sensorita
• Manufacturer: FAI

• Fitting Position: Rear Axle
• Width [mm]: 37
• Inner Diameter [mm]: 25
• Outer Diameter [mm]: 52
• Manufacturer: FAST

• Installatsiooni pool: Tagasild
• Laius (mm): 37
• Välisläbimõõt [mm]: 52
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Rear Axle both sides
• Height 1 [mm]: 37
• Outer Diameter 1 [mm]: 52
• Inner Diameter 1 [mm]: 25
• Thickness 1 [mm]: 37
• Manufacturer: JPN

• Fitting Position: Front Axle
• Width [mm]: 37
• Number of Teeth, ABS ring: 96
• Inner Diameter [mm]: 37
• Outer Diameter [mm]: 72
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Fabrication Number: KLP-NS-042
• Manufacturer: NTY
• Name: NTY KLP-NS-042

• Fitting Position: Rear Axle Left, Rear Axle Right
• Tightening Torque [Nm]: 175
• Versioon: Two
• Laius 1 (mm): 37
• Välisläbimõõt 1 [mm]: 52
• Siseläbimõõt 1 [mm]: 25
• Manufacturer: GSP LOZYSKA I PIASTY KOL

• Fitting Position: Rear Axle
• Laius (mm): 37
• Siseläbimõõt [mm]: 25
• Välisläbimõõt 1 [mm]: 52
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Fitting Position: Rear Axle Left, Rear Axle Right
• OE-numbri jaoks: 43210AX000
• Laius 1 (mm): 37
• Välisläbimõõt 1 [mm]: 52
• Siseläbimõõt 1 [mm]: 25
• Manufacturer: GSP

• Inner Diameter [mm]: 25
• Outer Diameter [mm]: 52
• Width [mm]: 37
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle
• for model code: K12E
• Width [mm]: 37
• Inner Diameter [mm]: 25
• Outer Diameter [mm]: 52
• for OE number: 3730.21
• Quality class: PJ
• Name: Wheel bearing kit

• Fitting Position: Rear Axle Left, Rear Axle Right
• Siseläbimõõt 1 [mm]: 25
• Välisläbimõõt 1 [mm]: 52
• Kaal (kg): 0,434
• Laius 1 (mm): 37
• Manufacturer: A.B.S.

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Hulk telje kohta: 2
• Välisläbimõõt [mm]: 52
• Siseläbimõõt [mm]: 25
• Laius (mm): 37
• Piirangutega toode/piirangu info 2: koos rasvakattega, koos mutriga, koos turvarõngaga
• Täiskomplekt:
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle
• Laius (mm): 37
• Siseläbimõõt [mm]: 25
• Välisläbimõõt [mm]: 52
• Piirangutega toode/piirangu info 2: koos turvarõngaga, koos mutriga
• Manufacturer: OPTIMAL
• Additional information: 702312 OPT
• Lisainfo: 702312 OPT

• Fitting Position: Rear Axle Left, Rear Axle Right
• Vehicle configuration line / variant: FRRE LR+RE
• for OE number: 43210AZ300
• Siseläbimõõt [mm]: 25
• Laius 1 (mm): 37
• Kinnitusaukude hulk: 1
• Name: DA KWD1094
• Manufacturer: DAYCO

• Fitting Position: Rear Axle
• Width [mm]: 37
• Inner Diameter [mm]: 25
• Outer Diameter [mm]: 52
• for OE number: 60 01 548 986
• Quality class: PJ
• Name: Wheel bearing kit

• Braking/Drive Dynamics: for vehicles with ABS
• Inner Diameter [mm]: 37
• Outer Diameter [mm]: 72
• Width [mm]: 37
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Number of Teeth, ABS ring: 48
• Fitting Position: Front Axle
• Manufacturer: JAPKO

• Braking/Drive Dynamics: for vehicles with ABS
• Inner Diameter [mm]: 37
• Outer Diameter [mm]: 72
• Width [mm]: 37
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Number of Teeth, ABS ring: 48
• Fitting Position: Front Axle
• Manufacturer: ASHIKA

• Fitting Position: Front Axle
• Braking/Drive Dynamics: for vehicles with ABS
• for model code: K12E
• Supplementary Article/Info 2: with integrated ABS sensor
• Width [mm]: 37
• Inner Diameter [mm]: 37
• Outer Diameter [mm]: 72
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Braking/Drive Dynamics: for vehicles with ABS
• Fitting Position: Front Axle Left, Front Axle Right
• Versioon: One
• Hammastehulk ABS-rõngas: 96
• Laius 1 (mm): 37
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Välisläbimõõt 1 [mm]: 72,04
• Siseläbimõõt 1 [mm]: 37
• Manufacturer: GSP

• Laius (mm): 37
• Siseläbimõõt [mm]: 25
• Välisläbimõõt [mm]: 52
• Laagriteostus: koonusrulllaager
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Kaal (kg): 0,46
• Piirangutega toode/piirangu info: teljemutriga
• Piirangutega toode/piirangu info 2: koos turvarõngaga
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Laius (mm): 37
• Siseläbimõõt [mm]: 25
• Välisläbimõõt [mm]: 52
• Piirangutega toode/piirangu info 2: koos kinnitusmaterjaliga
• Manufacturer: OPTIMAL

• Fitting Position: Front Axle
• Number of Teeth, ABS ring: 96
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Braking/Drive Dynamics: for vehicles with ABS
• Inner Diameter [mm]: 37
• Width [mm]: 37
• for OE number: 42210-AX000
• Outer Diameter [mm]: 72.04
• Manufacturer: ACKOJA

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Width [mm]: 37
• Weight [kg]: 0.476
• Inner Diameter [mm]: 25
• Outer Diameter [mm]: 52
• Manufacturer: METALCAUCHO

• Laius (mm): 37
• Siseläbimõõt [mm]: 25
• Välisläbimõõt [mm]: 52
• Laagriteostus: koonusrulllaager
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Kaal (kg): 0,451
• Piirangutega toode/piirangu info 2: koos turvarõngaga
• Piirangutega toode/piirangu info: teljemutriga
• Manufacturer: BLUEPRINT

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Esisild
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• OE-numbri jaoks: 402102977R
• Laius (mm): 37
• Välisläbimõõt [mm]: 72
• Manufacturer: KAMOKA

• Laius (mm): 37
• Siseläbimõõt [mm]: 25
• Välisläbimõõt [mm]: 52
• Laagriteostus: koonusrulllaager
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Kaal (kg): 0,46
• Piirangutega toode/piirangu info: teljemutriga
• Piirangutega toode/piirangu info 2: koos turvarõngaga
• Name: SW 60 90 5538
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Required quantity: 2
• for model code: K12E
• Kaal (kg): 0,496
• pakendi pikkus [cm]: 11
• pakendi laius [cm]: 9
• pakendi kõrgus [cm]: 6
• Välisläbimõõt [mm]: 52
• Siseläbimõõt [mm]: 25
• Laius (mm): 37
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Fitting Position: Front Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Laius (mm): 37
• Siseläbimõõt [mm]: 37
• Välisläbimõõt 1 [mm]: 72
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Fitting Position: Rear Axle
• Piirangutega toode/piirangu info: Foto vastab tarnekomplektile
• Siseläbimõõt [mm]: 25
• Välisläbimõõt [mm]: 52
• Laius (mm): 37
• SVHC: SVHS aineid ei esine
• Manufacturer: FAG
• Name: LU 713630300

• Fitting Position: Rear Axle
• Required quantity: 2
• for model code: K12E
• Laius (mm): 37
• Siseläbimõõt [mm]: 25
• Välisläbimõõt [mm]: 52
• Manufacturer: SKF
• Name: SK VKBA3525

• Installatsiooni pool: esisild vasakul, esisild paremal
• Hulk telje kohta: 2
• Laius (mm): 37
• Välisläbimõõt [mm]: 72
• Siseläbimõõt [mm]: 37
• Piirangutega toode/piirangu info 2: koos mutriga, koos turvarõngaga
• Täiskomplekt:
• Manufacturer: TOPRAN HANS PRIES

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Width [mm]: 37
• Inner Diameter [mm]: 37
• Outer Diameter [mm]: 72
• Manufacturer: FAST
• Lisainfo: FT22110 FAST
• Additional information: FT22110 FAST

• Required quantity: 2
• Braking/Drive Dynamics: for vehicles with ABS
• for model code: K12E
• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 37
• Outer Diameter [mm]: 72
• Supplementary Article/Info 2: with integrated magnetic sensor ring
• Manufacturer: KAVO

• Fitting Position: Front Axle
• Laius (mm): 37
• Hammastehulk ABS-rõngas: 96
• Siseläbimõõt [mm]: 37
• Välisläbimõõt [mm]: 72
• Piirangutega toode/piirangu info 2: koos integreeritud magnetilise anduriga
• Manufacturer: OPTIMAL

• Fitting Position: Front Axle Left, Front Axle Right
• Vehicle configuration line / variant: FRONT LR+FR
• for OE number: 40210AX000
• Siseläbimõõt [mm]: 37
• Laius 1 (mm): 37
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Kinnitusaukude hulk: 1
• Name: DA KWD1007
• Manufacturer: DAYCO

• Laius (mm): 37
• Siseläbimõõt [mm]: 37
• Välisläbimõõt [mm]: 72
• Materjal, äärik: NBR (Nitril-Butadien-Kautschuk)
• Laagriteostus: kuullaager
• Installatsiooni pool: esisild vasakul, esisild paremal
• Kaal (kg): 0,708
• Hooldusinfot jälgida:
• Manufacturer: FEBI BILSTEIN

Piirangutega toode/piirangu info 2: koos integreeritud magnetilise anduriga, koos ABS-andurirõngaga Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Siseläbimõõt 1 [mm]: 37
• Välisläbimõõt 1 [mm]: 72
• Laius 1 (mm): 37
• Hammastehulk ABS-rõngas: 48
• Kaal (kg): 0,76
• Piirangutega toode/piirangu info 2: koos integreeritud magnetilise anduriga
• Montaažiinfo: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Piirangutega toode/piirangu info: Foto vastab tarnekomplektile
• Siseläbimõõt [mm]: 37
• Välisläbimõõt [mm]: 72
• Laius (mm): 37
• SVHC: SVHS aineid ei esine
• Manufacturer: FAG
• Name: LU 713630840
• Lisainfo: 713 6308 40 FAG
• Additional information: 713 6308 40 FAG

• Fitting Position: Front Axle
• Required quantity: 2
• Braking/Drive Dynamics: for vehicles with ABS
• for model code: K12E
• Kaal (kg): 0,766
• pakendi pikkus [cm]: 11
• pakendi laius [cm]: 9
• pakendi kõrgus [cm]: 6
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Välisläbimõõt [mm]: 72
• Siseläbimõõt [mm]: 37
• Laius (mm): 37
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Laius (mm): 37
• Siseläbimõõt [mm]: 37
• Välisläbimõõt [mm]: 72
• Materjal, äärik: NBR (Nitril-Butadien-Kautschuk)
• Laagriteostus: kuullaager
• Installatsiooni pool: esisild vasakul, esisild paremal
• Kaal (kg): 0,708
• Hooldusinfot jälgida:
• Name: SW 60 92 4315
• Manufacturer: SWAG

Piirangutega toode/piirangu info 2: koos integreeritud magnetilise anduriga, koos ABS-andurirõngaga Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Required quantity: 2
• Braking/Drive Dynamics: for vehicles with ABS
• for model code: K12E
• Laius (mm): 37
• Siseläbimõõt [mm]: 37
• Välisläbimõõt [mm]: 72
• Piirangutega toode/piirangu info 2: koos integreeritud ABS-anduriga
• Tehniline informatsioon: With HUB 1 bearing
• Manufacturer: SKF
• Name: SK VKBA3637
• Lisainfo: VKBA 3637 SKF
• Additional information: VKBA 3637 SKF

• Fitting Position: Front Axle
• for model code: K12E
• Braking/Drive Dynamics: for vehicles with ABS
• Width [mm]: 37
• Inner Diameter [mm]: 37
• Outer Diameter [mm]: 72
• Supplementary Article/Info 2: with integrated ABS sensor
• Quality class: PJ
• Name: Wheel bearing kit

• Installatsiooni pool: Esisild
• Piirangutega toode/piirangu info: koos paigaldus-/kinnitusmaterjaliga
• Siseläbimõõt [mm]: 37
• Välisläbimõõt [mm]: 72
• Kõrgus (mm): 37
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Laagriteostus: Kuullaager
• Manufacturer: MEYLE

Üldine informatsioon: With mounting materials, to fit most models. Please check fit accuracy before installation.