• Number of pins: 2
• Corresponds to the original part in colour: white, blue
• Connector Shape: oval
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 19 mm
• Manufacturer: MEAT&DORIA

• Colour: black
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Fabrication Number: ESS-NS-003
• Manufacturer: NTY

• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: M 12x1,5
• Spanner Size: 19 mm
• Manufacturer: MEAT&DORIA

• Engine Code: VQ40DE
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: red, blue
• Name: ANDUR, KšTUSETEMPERATUUR
• Manufacturer: EPS

Manufacturer: ASHIKA

• Housing Colour: light blue
• Manufacturer: FAE

• Number of pins: 2
• Connector Shape: oval
• Socket colour: red
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 19
• for OE number: 22630 71L00
• Manufacturer: MEAT&DORIA

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Weight [kg]: 0.04
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV255
• Manufacturer: ESEN SKV

• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: JPA

Manufacturer: JAPKO

• Construction Year to: 09.2006
• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Construction Year from: 03.2007
• Required quantity: 1
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: ERA

• Construction Year to: 08.2012
• Fitting Position: Right
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Name: Andur, v„ntvoll
• Manufacturer: MD

• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 38
• Supplementary Article/Info 2: with seal ring
• Connector Shape: oval
• Manufacturer: ERA

• Construction Year from: 03.2007
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Name: Andur, v„ntvoll
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 09.2012
• Manufacturer: BOSCH

• Required quantity: 1
• Construction Year from: 03.2007
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. NISSAN 350Z 3,5 03-
• Manufacturer: BRM

• Construction Year from: 03.2007
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Name: Andur,Nukkvollipositsioon
• Manufacturer: HEL
• Lisainfo: 6PU013122-631
• Additional information: 6PU013122-631

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• for model code: Right cylinder bank
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP
• Additional information: SS10818 DEL
• Lisainfo: SS10818 DEL

• Fitting Position: Right
• Number of connectors: 3
• Weight [kg]: 0.05
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Fitting Depth [mm]: 38
• Manufacturer: ERA

• Fitting Position: Right
• Number of connectors: 3
• Weight [kg]: 0.05
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR, VŽNTVOLL
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE AS10196

• Construction Year to: 09.2006
• Number of connectors: 3
• Weight [kg]: 0.077
• Name: Andur,Nukkvollipositsioon
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Construction Year to: 09.2006
• Number of connectors: 3
• Weight [kg]: 0.077
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Housing Type: without housing
• Fabrication Number: EPP-NS-007
• Manufacturer: NTY

• Engine Code: VQ40DE
• Construction Year to: 08.2010
• Block Separation:
• Number of connectors: 2
• Colour: black
• Operating Mode: Electric
• Weight [kg]: 0.045
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Manufacturer: MAGNETI MARELLI

• Number of pins: 2
• Manufacturer: ERA

• Housing Colour: black
• Number of pins: 2
• Manufacturer: FAE

• Construction Year to: 09.2012
• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 315
• Name: Lambda andur
• Manufacturer: MAX

• Fitting Position: Left
• Sensor Type: Hall Sensor, Active sensor
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring, without cable
• Housing Colour: black
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 38
• Weight [kg]: 0.03
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 09.2012
• Lambda Sensor: Diagnostic Probe, Finger probe
• Fitting Position: after catalytic converter, Right
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Number of pins: 5
• Quality class: PJ
• Name: Air flow sensor

• Number of pins: 5
• Housing Type: without housing
• Manufacturer: JP GROUP
• Lisainfo: Air Mass Sensor
• Additional information: Air Mass Sensor

• for model code: Left cylinder bank
• Alternatively:
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 275
• Number of circuits: 4
• Weight [kg]: 0.12
• Resistor [Ohm]: 13
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 315
• Number of circuits: 4
• Weight [kg]: 0.12
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV692

• Engine Code: VQ40DE
• Fitting Position: before catalytic converter
• Cable Length [mm]: 400
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased

• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 500
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 470
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

Manufacturer: MAGNETI MARELLI

• Fitting Position: Left, after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Supplementary Article/Supplementary Info: without suction pipe
• for article number: 86286E
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Fitting Position: Left
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Construction Year to: 09.2012
• Fitting Position: Right
• Manufacturer: BOSCH

• Construction Year to: 09.2012
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, Left
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: VQ40DE
• for OE number: 22680AW400
• Manufacturer: MEAT&DORIA

• Housing Type: without housing
• Number of pins: 5
• Connector Shape: oval
• Recommended additional repairs: Air Filter
• Supplementary Article/Info 2: Can only be fitted with original mounting
• New Part:
• Used part return not required:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Housing Type: without housing
• Number of pins: 5
• Manufacturer: ERA

• Fitting Position: Left
• for OE number: 226A0EA200, 226908U300
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 470
• Number of pins: 4
• Weight [g]: 100
• Gross Weight [g]: 133
• Manufacturer: DENSO
• Name: DN DOX-2014
• Quality class: Q

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
ALMERA II HATCHBACK
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ALMERA II HATCHBACK
(kvaliteediklass: Q)"

• Required quantity: 1
• Construction Year to: 01.2010
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Manufacturer: BREMI

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Colour: red
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Construction Year to: 09.2006
• Transmission Type: Automatic Transmission
• Fitting Position: Right, after catalytic converter
• Lambda Sensor: Diagnostic Probe
• Length [mm]: 470
• Number of circuits: 4
• Manufacturer: VDO

• Fitting Position: Right
• General Information: Sold in Hitachi brand: printing and packaging
• Manufacturer: HITACHI

• Construction Year to: 09.2012
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, Left
• Number of circuits: 4
• Overall Length [mm]: 315
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Construction Year to: 08.2007
• Voltage [V]: 12
• Length [mm]: 500
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV862

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Length [mm]: 580
• Number of circuits: 5
• Weight [kg]: 0.16
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV853

• Construction Year to: 01.2010, 08.2010
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Block Separation:
• Construction Year from: 01.2006
• Number of circuits: 5
• Overall Length [mm]: 400
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.15
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Manufacturer: SKV GERMANY

• Housing Type: without housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Length [mm]: 435
• Number of circuits: 5
• Weight [kg]: 0.14
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Mounting Type: Bolted
• Number of pins: 5
• Supplementary Article/Supplementary Info: without suction pipe
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 8ET009142761

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 08.2007
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Fitting Position: Exhaust Manifold
• Required quantity: 2
• Line insulation design: with silicone-coated woven-fibre insulation
• Conductor Number: 5
• Connector Shape: angular
• Thread Size: M18 x 1,5
• Overall Length [mm]: 410
• Number of pins: 5
• Recommended change interval [km]: 160,000
• Weight [kg]: 0.133
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 22680-7S000
• Quality: OE
• Operating Mode: Electric
• Number of pins: 5
• Gross Weight [g]: 66
• Manufacturer: DENSO
• Name: DN DMA-0203

Additional information: "Tootja: DENSO
TEANA II (J32), 07.0
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
TEANA II (J32), 07.0
(kvaliteediklass: Q)"

• Construction Year to: 09.2012
• Recommended additional repairs: Air Filter
• Manufacturer: BOSCH

• Engine Code: VQ40DE
• Colour: chrome/black
• Name: Ohumassimootja
• Manufacturer: VDO

• Construction Year to: 11.2013
• Engine Code: VQ40DE
• Operating Mode: Electric
• Voltage [V]: 12
• Name: OHUMASSIMOOTJA
• Manufacturer: PIE

• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Name: OHUMASSIMOOTJA
• Manufacturer: HUC