• Fitting Position: Front Axle
• Vehicle type: Qashqai+2, Qashqai
• Block Separation:
• Pidurisüsteem: AKEBONO
• Kaal (kg): 0,04

• Fitting Position: Rear Axle
• Vehicle type: Qashqai+2, Qashqai
• Block Separation:
• Pidurisüsteem: AKEBONO
• Kaal (kg): 0,03

• Fitting Position: Rear Axle
• Brake System: Akebono
• Vehicle type: Qashqai
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK

• Installatsiooni pool: Tagasild
• Pidurisüsteem: AKEBONO
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: MAX

• Installatsiooni pool: Tagasild
• Pidurisüsteem: AKEBONO
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: AUT

• Fitting Position: Front Axle
• Brake System: Akebono
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK

• Installatsiooni pool: Esisild
• Pidurisüsteem: Akebono
• Manufacturer: FRENKIT

• Installatsiooni pool: Esisild
• Pidurisüsteem: AKEBONO
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-2792A

• Fitting Position: Front Axle
• Pidurisüsteem: AKEBONO
• Kaal (kg): 0,04
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle
• Brake System: Akebono
• Weight [kg]: 0.028
• Manufacturer: TOMEX BRAKES

• Fitting Position: Front Axle
• Brake System: Akebono
• Weight [kg]: 0.039
• Manufacturer: TOMEX BRAKES

• Vehicle type: Qashqai +2
• Fitting Position: Rear Axle
• Brake System: Akebono

• Installatsiooni pool: Esisild
• Pidurisüsteem: AKEBONO
• Manufacturer: ERT

• Fitting Position: Rear Axle
• Pidurisüsteem: AKEBONO
• Kaal (kg): 0,03
• Manufacturer: A.B.S.

• Installatsiooni pool: Tagasild, Esisild
• Pidurisüsteem: Akebono
• Manufacturer: FRENKIT

• Installatsiooni pool: Tagasild
• Pidurisüsteem: Akebono
• Name: FR 900005
• Manufacturer: FRENKIT

• Installatsiooni pool: Esisild
• Kaal (kg): 0,037
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: BLP

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Tagasild
• Pidurisüsteem: Akebono
• Manufacturer: FRENKIT
• Name: FR 900026

• Installatsiooni pool: Tagasild
• Pidurisüsteem: Akebono
• Manufacturer: FRENKIT
• Name: FR 901737

• Fitting Position: Rear Axle
• Brake System: Akebono
• Vehicle type: Qashqai+2
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: QBK

• Fitting Position: Front Axle
• Brake System: Akebono
• Hulk: 4
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LX0530

• Installatsiooni pool: Esisild
• Pidurisüsteem: Akebono
• Manufacturer: FRENKIT
• Name: FR 901736

• Fitting Position: Rear Axle
• Tootja piirang: AKEBONO
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Manufacturer: TRW

• Fitting Position: Front Axle
• Brake System: Akebono
• Quality class: PJ
• Name: Brake pads fitting kit

• Fitting Position: Front Axle
• Tootja piirang: AKEBONO
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Manufacturer: TRW

• Fitting Position: Rear Axle
• Vehicle type: Qashqai
• Brake System: Akebono
• Quality class: PJ
• Name: Brake pads fitting kit

• Fitting Position: Rear Axle Left, Rear Axle Right
• Cable Length [mm]: 1,090
• Overall Length [mm]: 1,125
• Sensor Type: Active sensor
• Fitting Depth [mm]: 18.4
• Braking/Drive Dynamics: for vehicles with ABS
• Fabrication Number: HCA-NS-013
• Manufacturer: NTY

• Construction Year from: 11.2010
• Wheelbase: for shortened wheelbase
• Fitting Position: Front Axle
• Pidurisüsteem: ATE
• Manufacturer: ATE

• Fitting Position: Front Axle
• Brake System: Akebono
• Manufacturer: BOSCH

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-NS-011
• Manufacturer: NTY

• Construction Year from: 11.2010
• Fitting Position: Rear Axle
• Pidurisüsteem: ATE
• Manufacturer: ATE

• Fitting Position: Front Axle Left
• Material: Sheet Steel
• Surface: Stoved Enamel, Zinc-coated
• Fabrication Number: HTO-NS-003
• paired article number: HTO-NS-004
• Manufacturer: NTY
• Name: NTY HTO-NS-003

• Fitting Position: Front Axle Left
• Material: Sheet Steel
• Surface: Stoved Enamel, Zinc-coated
• Fabrication Number: HTO-NS-004
• paired article number: HTO-NS-003
• Manufacturer: NTY
• Name: NTY HTO-NS-004

• Fitting Position: Rear Axle both sides
• Fitting Depth [mm]: 28.5
• for OE number: 47900 JD600
• Manufacturer: ASHIKA

• Construction Year to: 08.2010
• Installatsiooni pool: Tagasild
• Kaablipikkus (mm): 1 090
• OE-numbri jaoks: 47900JD000
• Pistikkontaktide arv: 2
• Kinnitusaukude hulk: 1
• Name: MM MWSS095
• Manufacturer: MAGNETI MARELLI

• Vehicle type: Qashqai, Qashqai+2
• Fitting Position: Left, Front Axle
• Material: Sheet Steel
• Name: CFD 612600
• Manufacturer: DACO

• Construction Year from: 10.2010
• Fitting Position: Rear Axle
• Number of pins: 2
• Cable Length [mm]: 1,110
• Sensor Type: Hall Sensor

• Installatsiooni pool: Esisild
• Anduritüüp: Aktiivne andur
• Pikkus (mm): 720
• Pistiku värv: hall
• Manufacturer: JP GROUP

• Installatsiooni pool: Tagasild
• Anduritüüp: Aktiivne andur
• Pikkus (mm): 1 080
• Pistiku värv: hall

• Fitting Position: Front Axle Left
• Weight [kg]: 0.31
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: Front Axle Right
• Weight [kg]: 0.31
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 57SKV146

• Fitting Position: Front Axle both sides
• Manufacturer: ASHIKA

• Fitting Position: Rear Axle
• Length [mm]: 1,080
• Sensor Type: Active sensor
• Manufacturer: KAVO

• for model code: JJ10, J10
• Construction Year from: 04.2010, 09.2010
• Fitting Position: Rear Axle
• Block Separation:
• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info 2: koos kaabliga
• pikkus üle kõige (mm): 1 138
• temperatuurivahemik alates [°C]: −40
• Temperatuurivahemik kuni [°C]: 150
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: BOS

• paaris tootenumbrid: 19-4421
• Installatsiooni pool: esisild paremal
• Name: Plekk,piduriketas
• Manufacturer: MAX

• paaris tootenumbrid: 19-4422
• Installatsiooni pool: esisild vasakul
• Name: Plekk,piduriketas
• Manufacturer: MAX

• Fitting Position: Rear Axle both sides
• Fitting Depth [mm]: 18.4
• for OE number: 47900 JD000
• Manufacturer: JAPKO

• for model code: JJ10, J10
• Construction Year to: 03.2010, 08.2010
• Fitting Position: Rear Axle
• Block Separation:
• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info 2: koos kaabliga
• pikkus üle kõige (mm): 1 124
• temperatuurivahemik alates [°C]: −40
• Temperatuurivahemik kuni [°C]: 150
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: BOS

• Construction Year from: 09.2010
• Installatsiooni pool: Tagasild
• Kaablipikkus (mm): 1 100
• OE-numbri jaoks: 47900BR00A
• Pistikkontaktide arv: 2
• Manufacturer: MAGNETI MARELLI
• Name: MM MWSS180

• Anduritüüp: Aktiivne andur
• Pistikkontaktide arv: 2
• Kaablipikkus (mm): 711
• Installatsiooni pool: esisild paremal, esisild vasakul
• Manufacturer: AUTOFREN SEINSA

• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-NS-105

• Installatsiooni pool: Esisild
• Garantii: 5 aastat garantii
• Manufacturer: HUCO

• Installatsiooni pool: esisild paremal
• Kvaliteet: WP
• Pealispind: tsingitud

• paaris tootenumbrid: 174248
• Installatsiooni pool: esisild paremal
• Kaal (kg): 0,272
• Name: Plekk,piduriketas
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Quantity: 2
• Anduritüüp: Aktiivne andur
• kasutatud klemmide arv: 2
• Kaablipikkus (mm): 733
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE SS20617

• Installatsiooni pool: esisild vasakul
• Kvaliteet: WP
• Pealispind: tsingitud

• paaris tootenumbrid: 174247
• Installatsiooni pool: esisild vasakul
• Kaal (kg): 0,272
• Name: Plekk,piduriketas
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info 2: koos kaabliga
• pikkus üle kõige (mm): 723
• temperatuurivahemik alates [°C]: −40
• Temperatuurivahemik kuni [°C]: 150
• Manufacturer: BOSCH

• Fitting Position: Front Axle
• Length [mm]: 720
• Sensor Type: Active sensor
• Manufacturer: KAVO

• Fitting Position: Rear Axle
• pikkus üle kõige (mm): 1 150
• Pikkus (mm): 18
• Anduritüüp: Aktiivne andur
• Pistiku värv: hall
• Kaablipikkus (mm): 1 075
• paaris tootenumbrid: 30743
• Kaal (kg): 0,07
• Manufacturer: A.B.S.

• for model code: J10E, JJ10E
• Installatsiooni pool: Esisild
• Kaal (kg): 0,152
• pakendi pikkus [cm]: 10
• pakendi laius [cm]: 10
• pakendi kõrgus [cm]: 2
• Manufacturer: FEBEST

• for model code: Qashqai+2, Qashqai
• Block Separation:
• Installatsiooni pool: esisild vasakul
• paaris tootenumbrid: 8125 14104
• Name: Plekk,piduriketas
• Manufacturer: TRI

• for model code: Qashqai+2, Qashqai
• Block Separation:
• Installatsiooni pool: esisild paremal
• paaris tootenumbrid: 8125 14103
• Name: Plekk,piduriketas
• Manufacturer: TRI

• Installatsiooni pool: esisild paremal
• Netokaal [kg]: 0,45
• Name: Plekk,piduriketas
• Manufacturer: NK

• Installatsiooni pool: esisild vasakul
• Netokaal [kg]: 0,45
• Name: Plekk,piduriketas
• Manufacturer: NK

• Fitting Position: Right, Left, Rear Axle
• Kaablipikkus (mm): 1 138
• Name: SN ASB168.04
• Manufacturer: NTN-SNR

• Fitting Position: Rear Axle
• Quantity: 2
• Anduritüüp: Aktiivne andur
• kasutatud klemmide arv: 2
• Kaablipikkus (mm): 1 125
• Name: DE SS20806
• Manufacturer: DELPHI

• Fitting Position: Rear Axle
• Number of pins: 2
• Cable Length [mm]: 1,100
• Sensor Type: Active sensor

• Fitting Position: Rear Axle
• Construction Year from: 04.2010
• Pistikkontaktide arv: 2
• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info 2: koos kaabliga
• Kaablipikkus (mm): 1 153
• Manufacturer: FAE

• Fitting Position: Front Axle Left
• Materjal: Raudplekk
• paaris tootenumbrid: 11296
• Kaal (kg): 0,28
• Manufacturer: A.B.S.

• Fitting Position: Front Axle Right
• Materjal: Raudplekk
• paaris tootenumbrid: 11295
• Kaal (kg): 0,28
• Manufacturer: A.B.S.

• Required quantity: 2
• Construction Year from: 04.2010
• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Fitting Position: Front Axle Right
• Material: Sheet Steel
• Surface: Zinc-coated, Cathodic Painting
• paired article number: 58191
• Diameter 1/ Diameter 2 [mm]: 80 / 295
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle Left
• Material: Sheet Steel
• Surface: Zinc-coated, Cathodic Painting
• paired article number: 58192
• Diameter 1/ Diameter 2 [mm]: 80 / 295
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: K9K 430
• Construction Year from: 09.2010
• Block Separation:
• Pikkus (mm): 1 140
• Ühenduste arv: 2
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Kaal (kg): 0,066
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: BLP

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pikkus (mm): 703
• Ühenduste arv: 2
• Installatsiooni pool: esisild vasakul, esisild paremal
• Kaal (kg): 0,044
• Manufacturer: BLUE PRINT

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 2
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Fitting Position: Rear Axle
• Construction Year from: 04.2010
• Quantity: 2
• Anduritüüp: Aktiivne andur
• kasutatud klemmide arv: 2
• Kaablipikkus (mm): 1 138
• Name: DE SS20793
• Manufacturer: DELPHI

• Installatsiooni pool: Tagasild paremal, Tagasild vasakul
• Kaablipikkus (mm): 1 085
• Pistikkontaktide arv: 2
• Anduritüüp: Aktiivne andur
• Manufacturer: AUTOFREN SEINSA

• Fitting Position: Rear Axle Left
• Material: Sheet Steel
• Surface: Zinc-coated, Cathodic Painting, Painted
• paired article number: 58269
• Diameter 1/ Diameter 2 [mm]: 85 / 310
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Right, Left, Rear Axle
• Kaablipikkus (mm): 1 140
• Name: SN ASB168.02
• Manufacturer: NTN-SNR

• paaris tootenumbrid: 19-4397
• Installatsiooni pool: Tagasild vasakul
• Name: Plekk,piduriketas
• Manufacturer: MAX

• paaris tootenumbrid: 19-4396
• Installatsiooni pool: Tagasild paremal
• Name: Plekk,piduriketas
• Manufacturer: MAX

• Installatsiooni pool: Tagasild paremal
• Materjal: Raudplekk
• Manufacturer: KAMOKA

• Installatsiooni pool: Tagasild vasakul
• Materjal: Raudplekk
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle Right
• Fabrication Number: HTO-NS-006
• paired article number: HTO-NS-005
• Name: NTY HTO-NS-006
• Manufacturer: NTY

• Fitting Position: Rear Axle Left
• Fabrication Number: HTO-NS-005
• paired article number: HTO-NS-006
• Manufacturer: NTY

Installatsiooni pool: Tagasild vasakul

• Fitting Position: Rear Axle Left
• Inner Diameter [mm]: 85
• Outer Diameter [mm]: 315
• paired article number: 131-07-644
• Colour: black
• Article number of recommended accessories: 231-04-041
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• paaris tootenumbrid: 176754
• Installatsiooni pool: Tagasild paremal
• Kaal (kg): 1,659
• Name: Plekk,piduriketas
• Manufacturer: FEB
• Additional information: FE176755
• Lisainfo: FE176755

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paaris tootenumbrid: 176755
• Installatsiooni pool: Tagasild vasakul
• Kaal (kg): 1,659
• Name: Plekk,piduriketas
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paaris tootenumbrid: 33 10 5669
• Installatsiooni pool: Tagasild paremal
• Kaal (kg): 1,659
• Name: SW 33 10 5667
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.