• Fitting Position: Rear Axle both sides
• Manufacturer: GSP

• for model code: J10, J10E
• Weight [kg]: 0.137
• Packaging length [cm]: 4.5
• Packaging width [cm]: 3.5
• Packaging height [cm]: 3.5
• Manufacturer: FEBEST

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: AB-NS-051
• Manufacturer: NTY

Lisainfo: NISSAN X-TRAIL T31 07-13, QASHQAI 06-13, ROGUE 07-13, RENAULT KOLEOS 08- /PRZ£D/ Additional information: NISSAN X-TRAIL T31 07-13, QASHQAI 06-13, ROGUE 07-13, RENAULT KOLEOS 08- /PRZ£D/

• Fitting Position: Front Axle
• Manufacturer: OYODO

• for model code: J10, J10E
• Weight [kg]: 0.216
• Packaging length [cm]: 6.5
• Packaging width [cm]: 4.2
• Packaging height [cm]: 4.2
• Manufacturer: FEBEST

• Construction Year from: 08.2008
• Construction Year to: 10.2011
• for model code: JJ10E
• Weight [kg]: 0.126
• Packaging length [cm]: 4.5
• Packaging width [cm]: 3.4
• Packaging height [cm]: 3.4
• Manufacturer: FEBEST

• for model code: J10, J10E
• Fitting Position: Front Axle
• Weight [kg]: 0.295
• Packaging length [cm]: 25
• Packaging width [cm]: 8.3
• Packaging height [cm]: 8.3
• Manufacturer: FEBEST

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Suspension: for vehicles with standard suspension
• Lisainfo: Shock Absorber
• Additional information: Shock Absorber

• Fabrication Number: A-NS-002
• Fitting Position: Rear Axle Left, Rear Axle Right
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Observe technical data:
• Replace in pairs only:

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom eye, Top eye
• Shock Absorber System: Twin-Tube
• Manufacturer: KAMOKA AMORTYZATORY

• Suspension: for vehicles with standard suspension
• Vehicle type: J10E
• Check OE number:
• Quantity per packing unit: 2
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Diameter [mm]: 45
• Length 1 [mm]: 500
• Length 2 [mm]: 327
• Quantity per axle: 1
• Observe technical data:

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber System: Twin-Tube
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: JAPKO

• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: ASHIKA-AMORTYZATORY

• Vehicle type: Quashqai, Quashqai +2
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber Design: Suspension Strut
• Name: CFD 562602
• Manufacturer: DACO

• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Name: BM SA0942
• Manufacturer: BREMSI

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Vehicle type: Quashqai, Quashqai +2
• Shock Absorber Type: Gas Pressure
• Fitting Position: Rear Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom eye, Top eye
• Shock Absorber System: Twin-Tube
• Name: Gas shock absorber
• Quality class: PJ

Lisainfo: "Tootja: SRL
QASHQAI (J10, JJ10),
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
QASHQAI (J10, JJ10),
(kvaliteediklass: PJ)"

• Vehicle type: Quashqai
• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Manufacturer: AUTO-GH

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle, Right, Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Manufacturer: OYODO

• Vehicle type: Quashqai +2
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Manufacturer: KAVO PARTS

• Fitting Position: Rear Axle
• Length [mm]: 506
• Length 2 [mm]: 323
• Shock Absorber Design: Damper Module
• Shock Absorber Mounting Type: Bottom eye, Top eye
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Diameter 1 [mm]: 45
• Diameter 2 [mm]: 30
• Spring Type: for vehicles with coil spring suspension
• Manufacturer: MAGNETI MARELLI
• Name: MM 7118G

• Fitting Position: Rear Axle
• Length [mm]: 479
• Length 2 [mm]: 306
• Shock Absorber Design: Damper Module
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Diameter 1 [mm]: 45
• Diameter 2 [mm]: 30
• Spring Type: for vehicles with coil spring suspension
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Lisainfo: Shock Absorber
• Additional information: Shock Absorber

• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Suspension: for vehicles with standard suspension
• Lisainfo: Shock Absorber
• Additional information: Shock Absorber

• Fabrication Number: A-NS-001
• Fitting Position: Front Axle Left
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• paired article number: A-NS-000
• Observe technical data:
• Manufacturer: NTY

• Fabrication Number: A-NS-000
• Fitting Position: Front Axle Right
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• paired article number: A-NS-001
• Observe technical data:
• Manufacturer: NTY

• Construction Year from: 04.2007, 08.2008
• Fitting Position: Front Axle Left
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• paired article number: MJ10063
• Article number of recommended accessories: SMJ0056
• Shock Absorber Mounting Type: Top pin
• Manufacturer: JAPKO

• Construction Year from: 04.2007, 08.2008
• Fitting Position: Front Axle Right
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• paired article number: MJ10062
• Article number of recommended accessories: SMJ0055
• Shock Absorber Mounting Type: Top pin
• Manufacturer: JAPKO

• Construction Year from: 04.2007, 08.2008
• Fitting Position: Front Axle Right
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• paired article number: MA-10062
• Article number of recommended accessories: SMA0055
• Shock Absorber Mounting Type: Top pin
• Manufacturer: ASHIKA-AMORTYZATORY

• Construction Year from: 04.2007, 08.2008
• Fitting Position: Front Axle Left
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• paired article number: MA-10063
• Article number of recommended accessories: SMA0056
• Shock Absorber Mounting Type: Top pin
• Manufacturer: ASHIKA-AMORTYZATORY

• Fitting Position: Front Axle, Front Axle Right
• Suspension: for vehicles with standard suspension
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Pin
• Shock Absorber System: Twin-Tube
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Front Axle, Front Axle Left
• Suspension: for vehicles with standard suspension
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Pin
• Shock Absorber System: Twin-Tube
• Manufacturer: DENCKERMANN AMORTYZATORY

• Vehicle type: Quashqai, Quashqai +2
• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut, Damper with Rebound Spring
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Name: CFD 452620L
• Manufacturer: DACO

• Fitting Position: Front Axle, Front Axle Left
• Suspension: for vehicles with standard suspension
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• paired article number: 232-01-125
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle Left
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut, Damper with Rebound Spring
• Shock Absorber Mounting Type: Top pin
• paired article number: SA0944
• Name: BM SA0943
• Manufacturer: BREMSI

• Fitting Position: Front Axle Right
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut, Damper with Rebound Spring
• Shock Absorber Mounting Type: Top pin
• paired article number: SA0943
• Name: BM SA0944
• Manufacturer: BREMSI

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Check OE number:
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SE30X158A
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Manufacturer: SACHS

for OE number: 56210-JD000, 56210-JD00A, 56210-JD00B, 56210-JD01A, 56210-JD02A, 56210-JD370A, 56210-JD70A, 56210-JD71A, 56210-JD72A, 56210-JD73A, 56210-JD73B, 56210-JD74A, 56210-JD74B, 56210-JD75A, E6210-JD02A, E6210-JD73A, E6210-JD74A, E6210-JD74B, E6210-JD75A, E6210-JE21B SVHC: No information available, please contact the manufacturer!

• Vehicle type: Quashqai, Quashqai +2
• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle Left
• Shock Absorber Design: Suspension Strut, Damper with Rebound Spring
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Name: Gas shock absorber left
• Quality class: PJ

Lisainfo: "Tootja: SRL
NISSAN QASHQAI
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
NISSAN QASHQAI
(kvaliteediklass: PJ)"

• Vehicle type: Quashqai, Quashqai +2
• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle Right
• Shock Absorber Design: Suspension Strut, Damper with Rebound Spring
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Name: Gas shock absorber right
• Quality class: PJ

Lisainfo: "Tootja: SRL
NISSAN QASHQAI
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
NISSAN QASHQAI
(kvaliteediklass: PJ)"

• Vehicle type: Quashqai, Quashqai +2
• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut, Damper with Rebound Spring
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• paired article number: SSA-6513
• Manufacturer: KAVO

• Vehicle type: Quashqai, Quashqai +2
• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut, Damper with Rebound Spring
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• paired article number: SSA-6514
• Manufacturer: KAVO

• Vehicle type: Quashqai
• Fitting Position: Front Axle, Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• paired article number: GH-352294H
• Article number of recommended accessories: GH-694702
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin
• Manufacturer: AUTO-GH

• Vehicle type: Quashqai
• Fitting Position: Front Axle, Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• paired article number: GH-352294V
• Article number of recommended accessories: GH-694702
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin
• Manufacturer: AUTO-GH

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Weight [kg]: 1.9
• Bore Diameter [mm]: 25
• Length 1 [mm]: 324
• Length 2 [mm]: 482
• Piston Rod Diameter [mm]: 12.4
• Article number of recommended accessories: PK309
• Packaging length [cm]: 60
• Packaging width [cm]: 7
• Packaging height [cm]: 7.2
• Manufacturer: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: KAYABA AMORTYZATORY
• Name: KY 349079

General Information: Please refer to the technical drawing in "Documents"

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• max. length [mm]: 500
• Name: KY 349097
• Manufacturer: KYB

General Information: Please refer to the technical drawing in "Documents"

• Construction Year from: 08.2008
• Construction Year to: 10.2011
• for model code: JJ10E
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Weight [kg]: 2.27
• Packaging length [cm]: 43.5
• Packaging width [cm]: 6.5
• Packaging height [cm]: 6
• Manufacturer: FEBEST

• Fitting Position: Front Axle Right
• Length [mm]: 577
• Length 2 [mm]: 381
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Clamp, Top pin
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Diameter 1 [mm]: 51
• Diameter 2 [mm]: 32
• paired article number: 357077070200
• Spring Type: for vehicles with coil spring suspension
• Name: MM 7077GR
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle Left
• Length [mm]: 577
• Length 2 [mm]: 381
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Diameter 1 [mm]: 51
• Diameter 2 [mm]: 32
• paired article number: 357077070100
• Spring Type: for vehicles with coil spring suspension
• Name: MM 7077GL
• Manufacturer: MAGNETI MARELLI

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Top eye, Bottom eye
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: Gas shock absorber
• Quality class: Q

Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Construction Year from: 01.2010
• Fitting Position: Front Axle Left
• Vehicle type: Qashqai
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 5
• Article number of recommended accessories: MK335L, PK307
• paired article number: D0025R
• Packaging length [cm]: 71.5
• Packaging width [cm]: 22
• Packaging height [cm]: 21.9
• Manufacturer: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Construction Year from: 01.2010
• Fitting Position: Front Axle Right
• Vehicle type: Qashqai
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 5
• Article number of recommended accessories: MK334R, PK307
• paired article number: D0026L
• Packaging length [cm]: 71.5
• Packaging width [cm]: 22
• Packaging height [cm]: 21.9
• Manufacturer: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Fitting Position: Front Axle Left
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut, Damper with Rebound Spring
• paired article number: 339196
• Shock Absorber Mounting Type: Top pin
• Name: KY 339197
• Manufacturer: KYB

• Fitting Position: Front Axle Right
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut, Damper with Rebound Spring
• paired article number: 339197
• Shock Absorber Mounting Type: Top pin
• Name: KY 339196
• Manufacturer: KYB

• paired article number: SA66840.20L
• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• max. length [mm]: 564
• min. length [mm]: 391
• Standpipe Diameter [mm]: 50
• Piston Rod Diameter [mm]: 22
• Piston Rod Thread: M12X125
• Name: SN SA66840.19R
• Manufacturer: SNR

• paired article number: SA66840.19R
• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• max. length [mm]: 564
• min. length [mm]: 391
• Standpipe Diameter [mm]: 50
• Piston Rod Diameter [mm]: 22
• Piston Rod Thread: M12X125
• Name: SN SA66840.20L
• Manufacturer: SNR

• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Article number of recommended accessories: 36-14 640 0004, 36-14 641 0002
• Replace in pairs only:
• paired article number: 36-26 623 0006
• Manufacturer: MEYLE

• Construction Year to: 12.2009
• Fitting Position: Front Axle Right
• Vehicle type: Qashqai
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 5.1
• Article number of recommended accessories: MK334R, PK307
• paired article number: D0024L
• Packaging length [cm]: 71.5
• Packaging width [cm]: 22
• Packaging height [cm]: 21.9
• Manufacturer: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Suspension: for vehicles with standard suspension
• Check OE number:
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SFE32/22X102A
• Fitting Position: Front Axle Right
• paired article number: 314 038
• Shock Absorber Mounting Type: Top pin
• Name: SHS 314037
• Manufacturer: SACHS

SVHC: No information available, please contact the manufacturer!

• Suspension: for vehicles with standard suspension
• Check OE number:
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SFE32/22X102A
• Fitting Position: Front Axle Left
• paired article number: 314 037
• Shock Absorber Mounting Type: Top pin
• Name: SHS 314038
• Manufacturer: SACHS

SVHC: No information available, please contact the manufacturer!

• Construction Year to: 02.2012
• for model code: J10, J10E
• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Weight [kg]: 5.33
• Packaging length [cm]: 52
• Packaging width [cm]: 19
• Packaging height [cm]: 19
• Manufacturer: FEBEST

• Construction Year to: 02.2012
• for model code: J10, J10E
• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Weight [kg]: 5.32
• Packaging length [cm]: 52
• Packaging width [cm]: 19
• Packaging height [cm]: 19
• Manufacturer: FEBEST

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• paired article number: 22-226372
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 22-226389
• Quality class: Q

Additional information: "Tootja: BILSTEIN
QASHQAI (J10, JJ10),
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
QASHQAI (J10, JJ10),
(kvaliteediklass: Q)"

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• paired article number: 22-226389
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 22-226372
• Quality class: Q

Additional information: "Tootja: BILSTEIN
QASHQAI (J10, JJ10),
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
QASHQAI (J10, JJ10),
(kvaliteediklass: Q)"