• Construction Year to: 08.2010
• Number of pins: 3
• Connector Shape: oval
• Fabrication Number: ECS-RE-000
• Manufacturer: NTY

Exhaust System: for vehicles with factory fitted soot -/particulate filter for OE number: 607 905 05 00, 22771 JG70A, 82 00 469 905, 18590 67JB0

• Construction Year to: 08.2010
• Fabrication Number: ECS-DW-001
• Manufacturer: NTY

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Fabrication Number: ECS-NS-001
• Manufacturer: NTY

• Emission Standard: Euro 5
• Number of connectors: 3
• Material: Plastic
• for OE number: 20 81 576 52R
• Name: Andur, heitgaasisurve
• Manufacturer: MAX

• Exhaust System: before soot particulate filter
• Emission Standard: Euro 5
• Engine Code: M9R
• Number of pins: 3
• Pressure [Pa] from: 0
• Pressure [Pa] to: 150,000
• for OE number: 208150007R
• Name: Andur, heitgaasisurve
• Manufacturer: NRF

• Emission Standard: Euro 5
• Number of pins: 3
• Manufacturer: TOPRAN

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Supplementary Article/Supplementary Info: with shrink squeeze connector, with gaskets/seals
• Number of pins: 3
• Supplementary Article/Info 2: with pipe
• Housing Colour: black
• Plug Type: Blade Terminal
• Weight [kg]: 0.013
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Connector Shape: oval
• Manufacturer: FAST

• Fitting Position: Exhaust Manifold
• Manufacturer Restriction: Citroen, Peugeot, Renault, Nissan, Mercedes-Benz
• Number of pins: 3
• Cable Length [mm]: 200
• Supplementary Article/Supplementary Info: with socket housing
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Cable Cross Section [mm²]: 0.75
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, heitgaasi rohuandur
• Manufacturer: HBE

• Exhaust System: before soot particulate filter
• Engine Code: M9R
• Number of pins: 3
• Pressure [Pa] from: 0
• Pressure [Pa] to: 100,000
• for OE number: 1821553SA0
• Name: Andur, heitgaasisurve
• Manufacturer: NRF

• Engine Code: M1D
• not for emission standard: Euro 5
• Fitting Position: Rear
• Pressure from [kPA]: 0
• Pressure to [kPA]: 100
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Engine Code: M9R
• Construction Year from: 09.2010, 04.2007
• Construction Year to: 08.2010
• Fitting Position: Particulate Filter
• not for emission standard: Euro 5
• Block Separation:
• Weight [kg]: 0.05
• Warranty: 3 years warranty
• Name: CE 17SKV658
• Manufacturer: ESEN SKV

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Engine Code: M9R
• Construction Year from: 09.2010
• Fitting Position: Particulate Filter
• Emission Standard: Euro 5
• Weight [kg]: 0.04
• Warranty: 3 years warranty
• Name: CE 17SKV656
• Manufacturer: ESEN SKV

• for OE number: 82 00 974 421
• Number of pins: 3
• Connector Shape: oval
• Socket colour: blue
• Fabrication Number: ECS-RE-001

• Number of pins: 3
• Warranty: 5 years warranty
• Name: Andur, heitgaasisurve
• Manufacturer: HUC

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Exhaust System: before soot particulate filter
• Emission Standard: Euro 5
• Engine Code: M9R
• Vehicle type: Qashqai
• not for country specific design: Mexico
• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: Andur, heitgaasisurve
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Exhaust System: before turbocharger
• Engine Code: M9R
• Number of pins: 3
• for OE number: 1401000Q0C
• Manufacturer: NRF

• Number of pins: 3
• Weight [kg]: 0.03
• Warranty: 3 years warranty
• Name: CE 17SKV777
• Manufacturer: ESEN SKV

• Number of connectors: 3
• Manufacturer: 3RG

• Exhaust System: before soot particulate filter
• Number of circuits: 2
• Number of mounting bores: 1
• Connector Shape: oval
• Number of pins: 3
• Weight [kg]: 0.023
• for OE number: 22 77 1JG 70A
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 22630 JG73A, 22630 JG70A
• Number of pins: 2
• Socket colour: grey
• Fabrication Number: EGT-NS-004
• Cable Length [mm]: 570
• Manufacturer: NTY

• for OE number: 22630 JD71A
• Number of pins: 2
• Socket colour: black
• Fabrication Number: EGT-NS-005
• Cable Length [mm]: 430
• Manufacturer: NTY

• Construction Year from: 09.2010
• Block Separation:
• Emission Standard: Euro 5
• Construction Year to: 06.2012
• Number of pins: 3
• Opening pressure [kPa]: 1
• Manufacturer: DELPHI
• Name: DE DPS00015

• Emission Standard: Euro 5
• Number of connectors: 3
• Material: Plastic
• Weight [kg]: 0.018
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 08.2010
• Emission Standard: Euro 4 (D4)
• Block Separation:
• Number of pins: 3
• Opening pressure [kPa]: 1
• Manufacturer: DELPHI
• Name: DE DPS00016

• Engine Code: M9R
• Construction Year from: 09.2010, 04.2007
• Fitting Position: Soot Particulate Filter
• not for emission standard: Euro 5
• Block Separation:
• Construction Year to: 08.2010
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: BOS

• Number of pins: 3
• Opening pressure [kPa]: 49
• Name: DE DPS00039-12B1
• Manufacturer: DELPHI

• Emission Standard: Up to Euro 5
• Number of pins: 3
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: MEY

• Emission Standard: Euro 5
• Number of connectors: 3
• Material: Plastic
• Weight [kg]: 0.018
• Name: SW 82 10 0854
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Emission Standard: Up to Euro 5
• for OE number: 22770-00Q0A
• Connector Shape: oval
• Number of circuits: 1
• Number of mounting bores: 1
• Number of pins: 3
• Weight [kg]: 0.019
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Exhaust System: before soot particulate filter
• Emission Standard: Euro 5
• Engine Code: M9R
• Vehicle type: Qashqai
• not for country specific design: USA
• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP009409121
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Colour: black
• Pressure [Pa] to: 150,000
• Supplementary Article/Info 2: without connection line
• Manufacturer: AIC

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• for OE number: 22630 JG70B
• Overall Length [mm]: 290
• Number of pins: 2
• Socket colour: grey
• Fabrication Number: EGT-NS-003
• Cable Length [mm]: 420
• Manufacturer: NTY

• Fitting Position: Front, before catalytic converter
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Fabrication Number: ESL-NS-005
• Manufacturer: NTY

• Number of connectors: 3
• Sensor Type: Differential Pressure Sensor
• Weight [kg]: 0.02
• for OE number: 22 77 014 54R
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pressure hose connector diameter [mm]: 5, 6.5
• Length [m]: 1
• Material: Silicone
• Chemical Properties: Oil resistant
• Temperature range from [°C]: -40
• Temperature range to [°C]: +350
• Clamping range from [mm]: 10, 11, 11.5, 12.5
• Clamping range to [mm]: 12.5, 13.5, 14, 15
• SVHC: No SVHC present!
• Manufacturer: HBE

Exhaust System: for vehicles with factory fitted soot -/particulate filter Supplementary Article/Info 2: with connection line, with protection hose, with marten protection, with clamps Technical Information: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• Engine Code: M9R
• for OE number: 22771-JG70A
• Sensor Type: Differential Pressure Sensor
• Output Voltage, up to [V]: 5
• Measuring Range to [kPa]: 100
• Number of pins: 3
• Number of mounting bores: 1
• Name: Andur, diferentsiaalrohk
• Manufacturer: PIE

• Exhaust System: before soot particulate filter
• Engine Code: M9R
• Vehicle type: Qashqai
• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PP009409041

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: M9R
• Emission Standard: Euro 4
• Pressure [Pa] to: 100,000
• Number of pins: 3
• Manufacturer: FAE

• Fabrication Number: EGT-RE-011
• Cable Length [mm]: 540
• Manufacturer: NTY

• Construction Year from: 04.2007
• Exhaust System: after soot particulate filter
• Number of pins: 3
• Connector Shape: oval
• Number of mounting bores: 1
• Number of circuits: 2
• Outer Diameter 1 [mm]: 8
• Outer Diameter 2 [mm]: 6
• Pressure to [kPA]: 100
• Manufacturer: MEAT&DORIA

for OE number: 607 905 05 00, 22771 JG70A, 82 00 469 905, 18590 67JB0

• Warranty: 3 years warranty
• Weight [kg]: 0.09
• Manufacturer: SKV GERMANY
• Name: CE 30SKV339

• Warranty: 3 years warranty
• Weight [kg]: 0.09
• Name: CE 30SKV337
• Manufacturer: ESEN SKV

Manufacturer: MAGNETI MARELLI

• Engine Code: M9R 740
• Exhaust System: behind turbocharger
• Voltage [V]: 12
• Cable Length [mm]: 540
• Number of pins: 2
• Warranty: 3 years warranty
• Weight [kg]: 0.08
• Operating Mode: Electric
• Name: CE 30SKV251
• Manufacturer: ESEN SKV

• Fabrication Number: EGT-NS-012
• Cable Length [mm]: 310
• Manufacturer: NTY

• Construction Year from: 09.2008
• Engine Code: M9R
• Exhaust System: after soot particulate filter
• Voltage [V]: 12
• Cable Length [mm]: 380
• Number of pins: 2
• Warranty: 3 years warranty
• Weight [kg]: 0.08
• Operating Mode: Electric
• Manufacturer: SKV GERMANY
• Name: CE 30SKV239

• Construction Year from: 04.2007
• Construction Year to: 08.2010
• Number of connectors: 3
• Pressure to [kPA]: 100
• Voltage from [V]: 0.5
• Voltage to [V]: 4.5
• Warranty: 5 years warranty
• Manufacturer: HUCO

• Number of pins: 3
• Number of circuits: 1
• Connector Shape: oval
• Number of mounting bores: 1
• Pressure to [kPA]: 150
• for OE number: 82 01 043 914, 82 00 741 321, 22 77 096 04R
• Manufacturer: MEAT&DORIA

• Engine Code: M1D
• Length [mm]: 570
• Number of pins: 5
• Connector Shape: D Shape
• Lambda Sensor: Thread pre-greased
• Line insulation design: with silicone-coated woven-fibre insulation
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Colour: red
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• External Thread Size: M12 x 1,25
• Number of connectors: 2
• Cable Length [mm]: 580
• Weight [kg]: 0.041
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: M9R
• Construction Year from: 09.2010
• Fitting Position: Soot Particulate Filter
• Emission Standard: Euro 5
• Manufacturer: BOSCH

• Number of connectors: 3
• Supplementary Article/Info 2: without fastening clamp
• Additionally required articles (article numbers): 8201428503
• Manufacturer: ERA

• for OE number: 22365 00QAK, 82 00 974 421
• Number of pins: 3
• Connector Shape: oval
• Number of circuits: 1
• Manufacturer: MEAT&DORIA

• Engine Code: M9R
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 655
• Name: Lambda andur
• Manufacturer: MAX

• Engine Code: M1D
• Cable Length [mm]: 650
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.413
• Manufacturer: EPS

Lambda Sensor: Heated, Planar probe, Broadband lambda sensor, Thread pre-greased

• Engine Code: M9R
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Length [mm]: 500
• Name: Lambda andur
• Manufacturer: MAX

• Engine Code: M9R
• Lambda Sensor: Regulating Probe, Broadband lambda sensor
• Exhaust System: before catalytic converter
• Number of pins: 5
• Cable Length [mm]: 570
• Manufacturer: MEAT&DORIA

• Line insulation design: with silicone-coated woven-fibre insulation
• Temperature range from [°C]: -40
• Weight [kg]: 0.077
• Shape: straight
• Socket colour: black
• Temperature range to [°C]: 900
• for OE number: 22630-JD71A
• Tightening Torque [Nm]: 45
• Cable Length [mm]: 380
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Connector Shape: oval
• Exhaust System: after soot particulate filter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: M9R
• Construction Year from: 04.2007
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 655
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.15
• Warranty: 3 years warranty
• Technical Information: Universal
• Name: CE 09SKV915
• Manufacturer: ESEN SKV

• Fitting Position: before soot particulate filter
• Sensor Type: Closed-type Sensor, PTC
• Cable Length [mm]: 580
• Number of pins: 2
• Alternative Repair Kit: 0894333
• Manufacturer: METZGER

• Engine Code: M9R
• Construction Year to: 08.2008
• Shape: straight
• Number of pins: 2
• Socket colour: grey
• Cable Length [mm]: 410
• for OE number: 22630 JD70A
• Manufacturer: MEAT&DORIA

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Fitting Position: after soot particulate filter
• Cable Length [mm]: 437
• Number of pins: 2
• Manufacturer: METZGER

• Fitting Position: before soot particulate filter
• Cable Length [mm]: 570
• Number of pins: 2
• Manufacturer: METZGER

• Construction Year from: 04.2007
• Lambda Sensor: Regulating Probe
• Number of circuits: 5
• Cable Length [mm]: 655
• Manufacturer: METZGER

• Engine Code: M9R
• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe, Heated
• Voltage [V]: 12
• Conductor Number: 5
• Cable Length [mm]: 500
• Number of pins: 6
• Name: LAMBDA ANDUR
• Manufacturer: PIE

• Required quantity: 1
• Fitting Position: before exhaust turbocharger
• Engine Code: M9R
• Supplementary Article/Supplementary Info: with synthetic grease

• Engine Code: M9R
• Construction Year from: 06.2007
• Construction Year to: 09.2007
• Fitting Position: after soot particulate filter
• Shape: Long
• Emission Standard: Up to Euro 4
• only in connection with: BM11059

• Engine Code: M9R
• Construction Year from: 06.2007
• Construction Year to: 09.2007
• Fitting Position: before soot particulate filter
• Shape: Short
• Emission Standard: Up to Euro 4
• only in connection with: BM11059