• Engine Code: VQ37VHR
• Thread Size: 1/8 GAS
• Spanner Size: 27
• Number of pins: 1
• Manufacturer: KAVO

Manufacturer: JAPKO

• Thread Size: 1/8x28h'' BSP
• Housing Colour: black
• Manufacturer: FAE

• Fabrication Number: ECT-RE-003
• Manufacturer: NTY
• Name: NTY ECT-RE-003

• Switch Pressure [bar]: 0.2
• Thread Size: 1/8x27 NPTF
• Sensor Type: Closed-type Sensor
• Manufacturer: VERNET

• Engine Code: VQ37VHR
• Pressure [bar]: 0.2
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: oval
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 2345012920
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Engine Code: VQ37VHR
• Pressure [bar]: 0.2
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Manufacturer: FACET

• Number of connectors: 2
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pressure [bar]: 0.4
• Housing Colour: black
• Thread Size: R 1/8-28
• Spanner Size: 0
• Number of pins: 1
• Name: Olisurvellitus
• Manufacturer: DLP

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: oval
• Number of pins: 2
• Socket colour: black
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 22630D9701
• Manufacturer: NRF

• for OE number: 51271207038
• Sensor Type: Passive sensor
• Manufacturer: KAMOKA

• Thread Size: M12x1,5
• Spanner Size: 19
• Manufacturer: JPN

• Number of connectors: 2
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• Name: SW 33 10 2488
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M12x1.5
• Manufacturer: VERNET

• Engine Code: VQ37VHR
• Housing Colour: blue
• Number of pins: 2
• Thread Size: M 12X1.5-6g
• Spanner Size: 19
• Manufacturer: DELPHI
• Name: DE TS10248-12B1

• for OE number: 25240 4M40E
• Manufacturer: BOSCH

• Engine Code: VQ37VHR
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: red, blue
• Manufacturer: FACET

• Engine Code: VQ37VHR
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: red, blue
• Name: ANDUR, KšTUSETEMPERATUUR
• Manufacturer: EPS

• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Corresponds to the original part in colour: blue, red
• Mounting Type: Vertical Screw Fitting
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009107531

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: VQ37VHR
• Sensor Type: NTC Sensor
• Thread Size: M12x1,5
• Spanner Size: 19
• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Manufacturer: MEYLE

• Required quantity: 1
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: Andur, v„ntvoll
• Manufacturer: MEY

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Construction Year to: 10.2010
• Cable Length [mm]: 1,420
• Number of pins: 2
• Manufacturer: FAE

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-NS-003
• Manufacturer: NTY

Fitting Position: Front, Left Front, Right Front, after catalytic converter

• Oxygen Sensor: Regulating Probe
• Number of circuits: 4
• Manufacturer: KAMOKA

• Housing Type: without housing
• Fabrication Number: EPP-NS-007
• Manufacturer: NTY

• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO
• Name: VA 366595

• Number of pins: 3
• Fitting Depth [mm]: 37.6
• Name: ANDUR, VŽNTVOLL
• Manufacturer: TRI

• Engine Code: VQ37VHR
• Oxygen Sensor: Diagnostic Probe, Heated
• Resistor [Ohm]: 3.7
• Number of circuits: 4
• Conductor Number: 4
• Length [mm]: 400
• Cable Length [mm]: 400
• Manufacturer: MAGNETI MARELLI

• Construction Year to: 04.2013
• Oxygen Sensor: Diagnostic Probe, Finger probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Number of pins: 5
• Housing Type: without housing
• Manufacturer: JP GROUP
• Lisainfo: Air Mass Sensor
• Additional information: Air Mass Sensor

• Oxygen Sensor: Regulating Probe, Oxygen Sensor
• Engine Code: VQ37VHR
• Voltage [V]: 12
• Length [mm]: 400
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.09
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV001

• Number of pins: 5
• Quality class: PJ
• Name: Air flow sensor

• Fitting Position: Front, after catalytic converter
• Supplementary Article/Info 2: without potentiometer
• Length [mm]: 400
• Thread Size: M18x1.5mm
• Number of pins: 4
• Oxygen Sensor: Heated, Planar probe
• Manufacturer: KAVO PARTS

• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Length [mm]: 400
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.12
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV569

• Oxygen Sensor: Diagnostic Probe, Finger probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 475
• Manufacturer: DELPHI ELEKTRONIKA

• Oxygen Sensor: Oxygen Sensor
• Cable Length [mm]: 290
• Alternatively:
• Number of circuits: 4
• Alternative Repair Kit: 570112
• Manufacturer: ERA

• Construction Year to: 04.2013
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Oxygen Sensor: Planar probe, Heated, Thread pre-greased
• Supplementary Article/Info 2: without plug
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 09.2010
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Guarantee: 3 years guarantee
• Weight [kg]: 0.11
• Number of connectors: 5
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV138
• Manufacturer: ESEN SKV

• Construction Year to: 04.2013
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Supplementary Article/Supplementary Info: without suction pipe
• Quality: OE EQUIVALENT
• for OE number: 366305
• Manufacturer: MEAT & DORIA

• Weight [kg]: 0.001
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Regulating Probe, Heated
• Length [mm]: 375
• Conductor Number: 4
• Number of circuits: 4
• Resistor [Ohm]: 2.1
• Cable Length [mm]: 375
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM282

• Number of pins: 3
• Manufacturer: METZGER

• Engine Code: VQ37VHR
• Fitting Position: after catalytic converter
• Cable Length [mm]: 400
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.997.007
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

Oxygen Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Construction Year to: 04.2013
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 300
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Line insulation design: with silicone-coated woven-fibre insulation
• Weight [kg]: 0.173
• Oxygen Sensor: Thread pre-greased
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 400
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 07.2014
• Fitting Position: Left
• for OE number: 226A0-ET000
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 475
• Number of pins: 4
• Weight [g]: 90
• Gross Weight [g]: 120
• Manufacturer: DENSO
• Name: DN DOX-1732

Oxygen Sensor: Diagnostic Probe, Heated, Finger probe, Oxygen Sensor

• Housing Type: without housing
• Number of pins: 5
• Manufacturer: ERA

• Oxygen Sensor: Regulating Probe
• Fitting Position: Right
• Exhaust System: for pre-catalytic converter
• Construction Year from: 08.2012
• for OE number: 226931MR0A
• Length [mm]: 500
• Number of pins: 4
• Manufacturer: FAE ELEKTRYKA

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Manufacturer: BREMI

• Housing Type: without housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI
• Name: DE AF10141-12B1

• Mounting Type: Bolted
• Number of pins: 5
• Supplementary Article/Supplementary Info: without suction pipe
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 8ET009142761

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 08.2012
• Fitting Position: Left
• Exhaust System: for pre-catalytic converter
• for OE number: 226931NA0A
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 370
• Number of pins: 4
• Weight [g]: 90
• Gross Weight [g]: 119
• Manufacturer: DENSO
• Name: DN DOX-0615

Oxygen Sensor: Regulating Probe, Heated, Finger probe, Broadband oxygen sensor, Thread pre-greased

• Construction Year to: 11.2020
• Recommended additional repairs: Air Filter
• Name: Ohumassimootja
• Manufacturer: BOS

• Construction Year from: 08.2012
• Fitting Position: Left
• for OE number: 226931MR0A, 226933WY0A
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 470
• Number of pins: 4
• Weight [g]: 90
• Gross Weight [g]: 118
• Manufacturer: DENSO
• Name: DN DOX-0557

Oxygen Sensor: Regulating Probe, Heated, Finger probe, Broadband oxygen sensor, Thread pre-greased

• for OE number: 22680-7S000
• Quality: OE
• Operating Mode: Electric
• Number of pins: 5
• Gross Weight [g]: 66
• alternative item: -
• Manufacturer: DENSO
• Name: DN DMA-0203

Additional information: "Tootja: DENSO
TEANA II (J32), 07.0
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
TEANA II (J32), 07.0
(kvaliteediklass: Q)"

• Engine Code: VQ37VHR
• Colour: chrome/black
• Name: Ohumassimootja
• Manufacturer: VDO

• Engine Code: VQ37VHR
• Operating Mode: Electric
• Voltage [V]: 12
• Name: OHUMASSIMOOTJA
• Manufacturer: PIE

• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Name: OHUMASSIMOOTJA
• Manufacturer: HUC

• General Information: Sold in Hitachi brand: printing and packaging
• Manufacturer: HITACHI