• Fitting Position: Rear Axle
• Brake System: AKEBONO
• Manufacturer: JP GROUP

• Fitting Position: Rear Axle
• Brake System: AKEBONO
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-2891A

• Brake System: Akebono
• Fitting Position: Rear Axle
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Brake System: Akebono
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK

• Fitting Position: Rear Axle
• Brake System: AKEBONO
• Weight [kg]: 0.04
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Brake System: Sumitomo
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-NS-092
• Manufacturer: NTY

• Fitting Position: Front Axle
• Length [mm]: 1,550
• Cable Length [mm]: 1,470
• Number of pins: 2
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.09
• Colour: black
• Temperature range from [°C]: -40
• Temperature range to [°C]: 125
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Sensor Type: Active sensor
• Fitting Position: Front Axle
• Manufacturer: KAMOKA

• Fitting Position: Front Axle
• for OE number: 479101KA0A
• Number of pins: 2
• Manufacturer: MAGNETI MARELLI
• Name: MM MWSS177

• Fitting Position: Rear Axle Right
• Fabrication Number: HCA-NS-094
• paired article number: HCA-NS-093
• Manufacturer: NTY

• Fitting Position: Rear Axle Left
• Fabrication Number: HCA-NS-093
• paired article number: HCA-NS-094
• Manufacturer: NTY

• Fitting Position: Rear Axle
• Brake System: Akebono
• Quantity per packing unit: 9
• Manufacturer: DELPHI HAMULCE

• Fitting Position: Front Axle
• Manufacturer: JPN

• Fitting Position: Front Axle Right
• Manufacturer: YSPARTS

• Fitting Position: Rear Axle Right
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.06
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV507

• Fitting Position: Rear Axle
• Manufacturer Restriction: AKEBONO
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Brake System: AKEBONO
• Manufacturer: PROFIPOWER

• paired article number: 19-4421
• Fitting Position: Front Axle Right
• Name: Plekk,piduriketas
• Manufacturer: MAX

• paired article number: 19-4422
• Fitting Position: Front Axle Left
• Name: Plekk,piduriketas
• Manufacturer: MAX

• Fitting Position: Left Rear
• Manufacturer: JAPKO

• Fitting Position: Front Axle
• Manufacturer Restriction: SUMITOMO
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front
• Manufacturer: JAPKO

• Fitting Position: Left Rear
• Manufacturer: ASHIKA

• Fitting Position: Right Rear
• Manufacturer: JAPKO

• Fitting Position: Right Rear
• Manufacturer: ASHIKA

• Fitting Position: Rear Axle
• Brake System: AKEBONO
• Manufacturer: PROFIPOWER

• Fitting Position: Front
• Manufacturer: ASHIKA

• Sensor Type: Active sensor
• Cable Length [mm]: 1,490
• Number of pins: 2
• Fitting Position: Front Axle
• Name: CZUJNIK ABS NISSAN P. JUKE 10- LE/PR
• Manufacturer: MEY

• Fitting Position: Left Rear
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: JPA

• Fitting Position: Rear Axle Left
• Quantity: 1
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Name: DE SS21310-12B1
• Manufacturer: DELPHI

• paired article number: 174247
• Fitting Position: Front Axle Left
• Weight [kg]: 0.272
• Observe service information:
• Name: Plekk,piduriketas
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 186523
• Number of connectors: 2
• Fitting Position: Rear Axle Left
• Cable Length [mm]: 735
• Weight [kg]: 0.045
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 186522
• Number of connectors: 2
• Fitting Position: Rear Axle Right
• Cable Length [mm]: 640
• Weight [kg]: 0.04
• Manufacturer: FEBI-UKLAD HAMULCOWY

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 174248
• Fitting Position: Front Axle Right
• Weight [kg]: 0.272
• Observe service information:
• Name: Plekk,piduriketas
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 2
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Required quantity: 1
• Fitting Position: Rear Axle Left
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• paired article number: ADN17168
• Number of connectors: 2
• Fitting Position: Rear Axle Right
• Cable Length [mm]: 640
• Weight [kg]: 0.04
• Manufacturer: BLUE PRINT ELEKTRYKA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Right
• Quantity: 1
• Sensor Type: Active sensor
• Cable Length [mm]: 630
• Number of pins: 2
• Name: CZUJNIK ABS NISSAN T. JUKE 10- PR
• Manufacturer: MEY

• Fitting Position: Front
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: JPA

• Fitting Position: Front Axle
• Quantity: 2
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 1,490
• Manufacturer: DELPHI ELEKTRONIKA

• paired article number: 33 11 0442
• Number of connectors: 2
• Fitting Position: Rear Axle Right
• Cable Length [mm]: 640
• Weight [kg]: 0.04
• Name: SW 33 11 0443
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 33 11 0443
• Number of connectors: 2
• Fitting Position: Rear Axle Left
• Cable Length [mm]: 735
• Weight [kg]: 0.045
• Name: SW 33 11 0442
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: ADN17169
• Number of connectors: 2
• Fitting Position: Rear Axle Left
• Cable Length [mm]: 735
• Weight [kg]: 0.045
• Manufacturer: BLUE PRINT ELEKTRYKA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Right
• Quantity: 1
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 630
• Name: DE SS20823
• Manufacturer: DELPHI

• Fitting Position: Front Axle Left
• for brake disc diameter [mm]: 280, 296, 320
• paired article number: 6115378
• Material: Sheet Steel
• Surface: Cathodic Painting
• Manufacturer: METZGER

• Fitting Position: Front Axle Right
• for brake disc diameter [mm]: 280, 296, 320
• paired article number: 6115377
• Material: Sheet Steel
• Surface: Cathodic Painting
• Manufacturer: METZGER

• Number of connectors: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Cable Length [mm]: 1,475
• Weight [kg]: 0.07
• Manufacturer: BLUE PRINT ELEKTRYKA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Fitting Position: Rear Axle Right
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Fitting Position: Rear Axle Left
• Vehicle Production Country: Great Britain
• Overall Length [mm]: 750
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 650
• paired article number: 31353
• Weight [kg]: 0.12
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle Right
• Vehicle Production Country: Great Britain
• Overall Length [mm]: 750
• Sensor Type: Active sensor
• Socket colour: grey
• Cable Length [mm]: 650
• paired article number: 31355
• Weight [kg]: 0.11
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Overall Length [mm]: 1,540
• Length [mm]: 39
• Sensor Type: Active sensor
• Socket colour: grey
• Cable Length [mm]: 1,455
• paired article number: 31354
• Weight [kg]: 0.14
• Manufacturer: A.B.S.

• Construction Year to: 12.2018
• Fitting Position: Front Axle
• Brake System: Sumitomo
• Manufacturer: BOSCH

• Fitting Position: Front Axle Right
• Material: Sheet Steel
• Surface: Zinc-coated, Cathodic Painting
• paired article number: 58191
• Diameter 1/Diameter 2 [mm]: 80 / 295
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle Left
• Material: Sheet Steel
• Surface: Zinc-coated, Cathodic Painting
• paired article number: 58192
• Diameter 1/Diameter 2 [mm]: 80 / 295
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: MR16DDT
• Fitting Position: Rear Axle Left
• Required quantity: 1
• Cable Length [mm]: 752
• Sensor Length [mm]: 18.3
• Manufacturer: FACET

• Fitting Position: Right Rear
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: JPA

• Fitting Position: Rear Axle Left
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 760
• for OE number: 479011KA0A
• Manufacturer: MEAT&DORIA

• Fitting Position: Front Axle
• Required quantity: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• paired article number: 19-4397
• Fitting Position: Rear Axle Left
• Name: Plekk,piduriketas
• Manufacturer: MAX
• Lisainfo: 19-4396
• Additional information: 19-4396

• paired article number: 19-4396
• Fitting Position: Rear Axle Right
• Name: Plekk,piduriketas
• Manufacturer: MAX

• Fitting Position: Left, Rear Axle
• Required quantity: 1
• Voltage [V]: 12
• Cable Length [mm]: 754
• Sensor Type: Active sensor
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Name: Andur, rattap””rete arv
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Left, Right, Front Axle
• Required quantity: 2
• Voltage [V]: 12
• Cable Length [mm]: 1,500
• Sensor Type: Active sensor
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Name: Andur, rattap””rete arv
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• paired article number: 176755
• Fitting Position: Rear Axle Left
• Weight [kg]: 1.659
• Observe service information:
• Name: Plekk,piduriketas
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 176754
• Fitting Position: Rear Axle Right
• Weight [kg]: 1.659
• Observe service information:
• Name: Plekk,piduriketas
• Manufacturer: FEB
• Additional information: FE176755
• Lisainfo: FE176755

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Right
• Colour: black
• Material: Sheet Steel
• Surface: Cathodic Painting
• paired article number: BSP-9604L
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Rear Axle Left
• Colour: black
• Material: Sheet Steel
• Surface: Cathodic Painting
• paired article number: BSP-9604R
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Rear Axle Right
• Guarantee: 3 years guarantee
• paired article number: 57SKV645
• Weight [kg]: 1.76
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 57SKV646

• Fitting Position: Rear Axle Left
• Guarantee: 3 years guarantee
• paired article number: 57SKV646
• Weight [kg]: 1.76
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 57SKV645

• Fitting Position: Rear Axle Right
• Material: Sheet Steel
• Surface: Zinc-coated, Cathodic Painting, Painted
• paired article number: 58270
• Diameter 1/Diameter 2 [mm]: 85 / 315
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle Left
• Material: Sheet Steel
• Surface: Zinc-coated, Cathodic Painting, Painted
• paired article number: 58271
• Diameter 1/Diameter 2 [mm]: 85 / 315
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.