Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Front Axle,
Wheel Side - Height [mm]: 156
- Joint Type: Universal Joint
- Supplementary Article/Info 2: with clamps
- Inner Diameter 1 [mm]: 23
- Inner Diameter 2 [mm]: 112
-
Name: KAITSEKUMMIKOMPLEKT,
VEOVOLL - Manufacturer: SKF
Lisainfo: VKJP 01003 SKF 22-123 kõrgus 156 Sobib kasutamiseks kummivenitus tööriistaga üle veovõlli otsa. Lõika mõõtu pärast klambrite paigaldamist . Additional information: VKJP 01003 SKF 22-123 kõrgus 156 Sobib kasutamiseks kummivenitus tööriistaga üle veovõlli otsa. Lõika mõõtu pärast klambrite paigaldamist .
- Fitting Position: Wheel Side
- Inner Diameter 1 [mm]: 22
- Inner Diameter 2 [mm]: 81
- Height [mm]: 130
- Version: UNIVERSAL BOOT KIT
-
Name: KAITSEKUMMIKOMPLEKT,
VEOVOLL - Manufacturer: AUT
- Additional information: D8000E
- Lisainfo: D8000E
- Fitting Position: transmission sided
- Inner Diameter 1 [mm]: 25
- Inner Diameter 2 [mm]: 75
- Height [mm]: 98
-
Name: KAITSEKUMMIKOMPLEKT,
VEOVOLL - Manufacturer: AUT
-
Fitting Position: Front Axle Left,
Front Axle Right, Wheel Side - Length [mm]: 110
- Inner Diameter 1 [mm]: 94
- Inner Diameter 2 [mm]: 25
-
Lisainfo: Bellow Set,
drive shaft -
Additional information: Bellow Set,
drive shaft
-
Fitting Position: Wheel Side,
Front Axle Left, Front Axle Right - Inner Diameter 1 [mm]: 23
- Inner Diameter 2 [mm]: 116
- Height [mm]: 136
-
Manufacturer: SNR /
NTN- SNR/ - Name: SN OBK10.002
- Fitting Position: Wheel Side
- Inner Diameter 1 [mm]: 27.5
- Inner Diameter 2 [mm]: 95.5
- Manufacturer: JPN
-
Fitting Position: Wheel Side,
Front Axle Left, Front Axle Right - Inner Diameter 1 from [mm]: 24
- Inner Diameter 1 to [mm]: 28
- Inner Diameter 2 from [mm]: 94
- Inner Diameter 2 to [mm]: 108
- Height [mm]: 127
- New Part:
- Supplementary Article/Supplementary Info: with grease
-
Name: Kaitsekumm,
veovoll - Manufacturer: GKN
General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.
- Engine Code: YD25DDTi
- Construction Year to: 08.2010
-
Fitting Position: transmission sided,
Front Axle - Block Separation:
- Length [mm]: 98
- Material: Thermoplast
- Inner Diameter 1 [mm]: 25
- Inner Diameter 2 [mm]: 75
- Weight [kg]: 0.304
-
Name: KAITSEKUMMIKOMPLEKT,
VEOVOLL - Manufacturer: BLP
- Additional information: ADN18141
- Lisainfo: ADN18141
Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Inner Diameter 1 [mm]: 25
- Inner Diameter 2 [mm]: 94
- Height [mm]: 110
- Fitting Position: Wheel Side
- Name: SN OBK68.005
- Manufacturer: SNR
-
Transmission Type: 5-
Speed Manual Transmission -
for model code: D22F,
D22FF, LCD22S - Fitting Position: transmission sided
- Length [mm]: 97
- Weight [kg]: 0.296
-
Material: NBR
(nitrile butadiene rubber) - Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 86
- Packaging length [cm]: 11.6
- Packaging width [cm]: 9.7
- Packaging height [cm]: 9.7
- Manufacturer: FEBEST
-
Transmission Type: 5-
Speed Manual Transmission -
for model code: D22F,
D22FF, LCD22S - Fitting Position: Wheel Side
- Length [mm]: 107
- Weight [kg]: 0.262
- Material: PVC
- Inner Diameter 1 [mm]: 28
- Inner Diameter 2 [mm]: 96
- Packaging length [cm]: 12.5
- Packaging width [cm]: 10.5
- Packaging height [cm]: 10.5
- Manufacturer: FEBEST
- Length [mm]: 111
- Material: Thermoplast
-
Fitting Position: Wheel Side,
Front Axle - Inner Diameter 1 [mm]: 28
- Weight [kg]: 0.3
- Inner Diameter 2 [mm]: 96
- Manufacturer: BLUE PRINT
- Additional information: ADN18125
- Lisainfo: ADN18125
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Wheel Side,
Front Axle Left, Front Axle Right - Inner Diameter 1 [mm]: 28
- Inner Diameter 2 [mm]: 96
- Height [mm]: 111
-
Bellows Material: TPE
(thermoplastic elastomer) - New Part:
- Supplementary Article/Supplementary Info: with grease
- Manufacturer: LOBRO
General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.
- Inner Diameter 1 [mm]: 25
- Inner Diameter 2 [mm]: 75
- Height [mm]: 98
- Joint Type: Tripod Joint
-
Bellows Material: NBR
(nitrile butadiene rubber) - New Part:
- Supplementary Article/Supplementary Info: with grease
- Manufacturer: GKN
Fitting Position: transmission sided, Front Axle Left, Front Axle Right General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks