• Fitting Position: Rear Axle
• Brake System: ATE
• Height [mm]: 61.2
• Width [mm]: 62
• Thickness [mm]: 15.8
• Wear Warning Contact: excl. wear warning contact
• Manufacturer: JP GROUP
• Lisainfo: Brake pad set, rear, 15.7 mm
• Additional information: Brake pad set, rear, 15.7 mm

• Fitting Position: Front Axle
• Brake System: Lucas / TRW
• Height [mm]: 63.8
• Width [mm]: 130
• Thickness [mm]: 18.3
• Wear Warning Contact: excl. wear warning contact
• Lisainfo: Brake pad set, front, 18.3 mm
• Additional information: Brake pad set, front, 18.3 mm

• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 740
• Lisainfo: Sensor, brake lining wear
• Additional information: Sensor, brake lining wear

• Brake Type: Disc Brake
• Fitting Position: Front Axle
• Length [mm]: 740
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MAX

• Required quantity: 2
• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Weight [kg]: 0.3
• Warning Contact Length [mm]: 740
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 740
• Fitting Position: Front Axle Left, Front Axle Right
• Brake Type: Disc Brake
• Weight [kg]: 0.046
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Length [mm]: 740
• Brake Type: Disc Brake
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: BOS

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Brake System: TRW
• Length [mm]: 750
• Supplementary Article/Supplementary Info: Axle Kit
• Name: QB WS0157A
• Manufacturer: QUICK BRAKE

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Manufacturer Restriction: TRW
• Length [mm]: 745
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Wear Warning Contact: excl. wear warning contact
• Brake System: ATE
• Width [mm]: 62
• Height [mm]: 61
• Thickness [mm]: 16
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Thickness [mm]: 15.6
• Length [mm]: 62
• Height 1 [mm]: 61
• WVA Number: 21050
• Fitting Position: Rear Axle
• Manufacturer: JAPKO

• Required quantity: 2
• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 730
• Manufacturer: ATE

• Fitting Position: Rear Axle
• Height [mm]: 61
• Brake System: ATE
• Thickness [mm]: 17.5
• Width [mm]: 61.5
• Manufacturer: LPR

• Fitting Position: Rear Axle
• FMSI Code: D709-7614 D811-7686
• Test Mark: E1 90R-011094/470
• WVA Number: 21050
• Brake System: Continental
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Organic
• Wear Warning Contact: not prepared for wear indicator
• Width 1 [mm]: 61.8
• Width 2 [mm]: 61.8
• Height 1 [mm]: 61
• Height 2 [mm]: 61
• Thickness 1 [mm]: 15.2
• Thickness 2 [mm]: 15.2
• Manufacturer: DELPHI
• Name: DE LP590

• Height [mm]: 61.2
• Thickness [mm]: 15.2
• Wear Warning Contact: excl. wear warning contact
• Brake System: Teves
• Fitting Position: Rear Axle
• Width [mm]: 62
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Length [mm]: 61.5
• Width [mm]: 61
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 17.3
• Weight [kg]: 0.797
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Width [mm]: 62
• Height [mm]: 61.2
• Thickness [mm]: 15.2
• Wear Warning Contact: excl. wear warning contact
• Brake System: Teves
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: QUARO

• Fitting Position: Rear Axle
• Brake System: TEVES
• Width [mm]: 62
• Height [mm]: 61.1
• Thickness [mm]: 14.5
• WVA Number: 21051
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 0.72
• Name: VA 301183
• Manufacturer: VALEO

• Fitting Position: Rear Axle
• Width [mm]: 61.5
• Height [mm]: 61
• Thickness [mm]: 15.7
• Wear Warning Contact: excl. wear warning contact
• Brake System: ATE
• Supplementary Article/Info 2: with anti-squeak plate
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with anti-squeak plate, with mounting manual
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 21050
• Thickness [mm]: 14.3
• Width [mm]: 61.5
• Height [mm]: 61
• Brake System: ATE
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: BOS

• Parameter: DP1010.10.0954
• Fitting Position: Rear Axle
• Thickness [mm]: 15
• Length [mm]: 61.9
• Height [mm]: 61
• Brake System: Ate-teves
• Manufacturer: DRIVE

• Fitting Position: Rear Axle
• Width [mm]: 61.5
• Height [mm]: 61
• Thickness [mm]: 15.7
• Wear Warning Contact: excl. wear warning contact
• Brake System: ATE
• Supplementary Article/Info 2: with anti-squeak plate
• Quality: PREMIUM
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

General Information: MEYLE-PD brake pads have a very short brake-in time, to ensure safe initial braking and high performance from the start. MEYLE-PD brake pads have a brake-in coating on the pad or are treated with scorching technology.

• Fitting Position: Front Axle
• Width [mm]: 129.9
• Height [mm]: 63.8
• Thickness [mm]: 18.3
• Wear Warning Contact: excl. wear warning contact
• Brake System: Lucas / TRW
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle
• Width [mm]: 130
• Height [mm]: 64.4
• Thickness [mm]: 18.3
• Wear Warning Contact: prepared for wear indicator
• Brake System: Lucas
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: QUARO

• Fitting Position: Rear Axle
• Width [mm]: 61.9
• Height [mm]: 61.2
• Thickness [mm]: 15.2
• Wear Warning Contact: not prepared for wear indicator
• WVA Number: 21050
• Brake System: Teves
• Article number of recommended accessories: MBA1266
• Observe mounting information:
• Packaging length [cm]: 9.5
• Packaging width [cm]: 8.2
• Packaging height [cm]: 7.3
• Manufacturer: MINTEX

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Manufacturer Restriction: ATE
• Wear Warning Contact: not prepared for wear indicator
• WVA Number: 21050
• Test Mark: E1 90R-01814/074
• Length [mm]: 61.7
• Thickness [mm]: 15.7
• Height [mm]: 61.2
• Manufacturer: BRECK KLOCKI HAMULCOWE

• Fitting Position: Front Axle
• Height [mm]: 63.9
• Thickness [mm]: 18.5
• Wear Warning Contact: prepared for wear indicator
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Width [mm]: 130
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Width [mm]: 61.6
• Height [mm]: 61.2
• Thickness [mm]: 15.8
• Brake System: ATE
• Test Mark: E9 90R-02A1382/1350
• MAPP code available:
• Article number of recommended accessories: 13.0460-0198.2, 13.0460-0246.2, 13.0460-0347.2
• Observe dimensions:
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: ATE
• Quality class: Q

Wear Warning Contact: not prepared for wear indicator, excl. wear warning contact

• Fitting Position: Rear Axle
• Width [mm]: 61.9
• Height [mm]: 61.2
• Thickness [mm]: 15.2
• Wear Warning Contact: not prepared for wear indicator
• WVA Number: 21050
• Brake System: Teves
• Article number of recommended accessories: 82025700
• Packaging length [cm]: 9.5
• Packaging width [cm]: 8.2
• Packaging height [cm]: 7.3
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TEX

• Fitting Position: Front Axle
• Brake System: TRW
• Width [mm]: 130
• Height [mm]: 64.2
• Thickness [mm]: 18.3
• Width 2 [mm]: 130
• Height 2 [mm]: 64.2
• Thickness 2 [mm]: 18.3
• WVA Number: 21368
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 1.86
• Name: VA 301256
• Manufacturer: VALEO

• Fitting Position: Rear Axle
• Width [mm]: 62
• Thickness [mm]: 15
• Height [mm]: 61
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Teves
• WVA Number: 21050
• Manufacturer: BREMBO
• Name: BR P 59 014

• Fitting Position: Rear Axle
• Manufacturer Restriction: ATE
• Wear Warning Contact: not prepared for wear indicator
• Test Mark: E1 90R 01025/450
• Height [mm]: 61
• Width [mm]: 61.5
• Thickness [mm]: 15.5
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• FMSI Code: D720-7588
• Test Mark: E1 90R-01881/464
• WVA Number: 21368
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear indicator
• Width 1 [mm]: 130
• Width 2 [mm]: 129.8
• Height 1 [mm]: 63.9
• Height 2 [mm]: 63.9
• Thickness 1 [mm]: 17.9
• Thickness 2 [mm]: 17.9
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP848

• Fitting Position: Rear Axle
• Thickness [mm]: 15.6
• Test Mark: R90 Homologated
• Width [mm]: 62
• Height [mm]: 61
• Weight [kg]: 0.654
• Height 1 [mm]: 61
• Wear Warning Contact: not prepared for wear indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: ATE
• Packing Type: Box
• WVA Number: 21050
• Packaging length [cm]: 15
• Packaging width [cm]: 10.5
• Packaging height [cm]: 4.3
• Manufacturer: JURID

• Fitting Position: Front Axle
• Width [mm]: 129.8
• Height [mm]: 63.9
• Thickness [mm]: 18.5
• Wear Warning Contact: prepared for wear indicator
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

• Fitting Position: Front Axle
• Article number of recommended accessories: MWI0157
• Width [mm]: 129.9
• Height [mm]: 64.4
• Thickness [mm]: 18.3
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Info 2: with brake caliper screws
• WVA Number: 21368
• Brake System: Lucas
• Packaging length [cm]: 15.2
• Packaging width [cm]: 8.8
• Packaging height [cm]: 8.4
• Weight [kg]: 1.745
• Manufacturer: MINTEX

• Fitting Position: Rear Axle
• Width [mm]: 61.9
• Height [mm]: 61.2
• Thickness [mm]: 15.2
• Wear Warning Contact: not prepared for wear indicator
• WVA Number: 21050
• Brake System: Teves
• Article number of recommended accessories: 8DZ 355 202-891
• Name: HE 8DB355007381
• Manufacturer: HELLA PAGID

• Fitting Position: Front Axle
• Width [mm]: 130
• Thickness [mm]: 18
• Height [mm]: 64
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Lucas
• Supplementary Article/Info 2: with brake caliper screws
• WVA Number: 21368
• Manufacturer: BREMBO
• Name: BR P 59 016

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: with accessories
• Supplementary Article/Info 2: with anti-squeak plate, with bolts/screws
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 21368
• Number of bolts/screws: 2
• Width [mm]: 129.9
• Height [mm]: 64.2
• Thickness 1 [mm]: 18.3
• Thickness 2 [mm]: 19
• Brake System: Lucas-Girling
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: BOS

• Fitting Position: Front Axle
• Manufacturer Restriction: TRW
• Width [mm]: 129.7
• Height [mm]: 63.8
• Thickness [mm]: 19
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: with accessories
• Supplementary Article/Info 2: with brake caliper screws
• Test Mark: E1 90R 01024/197
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Manufacturer Restriction: TRW
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 21368
• Test Mark: E1 90R-01811/126
• Length [mm]: 129.7
• Thickness [mm]: 18.3
• Height [mm]: 63.8
• Manufacturer: BRECK KLOCKI HAMULCOWE

• Fitting Position: Front Axle
• Width [mm]: 129.9
• Height [mm]: 63.8
• Thickness [mm]: 18.3
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: with brake caliper screws
• Number of bolts/screws: 2
• Brake System: Lucas / TRW
• Test Mark: E1 90R-01054/349
• MAPP code available:
• Article number of recommended accessories: 24.8190-0711.2, 24.8190-0716.2
• Observe dimensions:
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: ATE

• Fitting Position: Front Axle
• Article number of recommended accessories: 8DK 355 250-221
• Width [mm]: 129.9
• Height [mm]: 64.4
• Thickness [mm]: 18.3
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Info 2: with brake caliper screws
• WVA Number: 21368
• Brake System: Lucas
• Weight [kg]: 1.745
• Name: HE 8DB355017771
• Manufacturer: HELLA PAGID