• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Colour: black
• Manufacturer: JP GROUP
• Lisainfo: Sender for outer temperature
• Additional information: Sender for outer temperature

• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 740
• Lisainfo: Sensor, brake lining wear
• Additional information: Sensor, brake lining wear

• Number of pins: 2
• Connector Shape: oval
• Fabrication Number: ECT-PL-000
• Manufacturer: NTY
• Name: NTY ECT-PL-000

• Vehicle Identification Number (VIN) from: W1015435
• Manufacturer: DELLO AUTOMEGA

• Vehicle Equipment: for vehicles with check control system
• Number of pins: 2
• Connector Shape: oval
• Colour: black
• Material: Plastic
• for OE number: 90346055
• Manufacturer: DELLO AUTOMEGA

• Number of pins: 2
• Name: ANDUR,VŽLISTEMPERATUUR
• Manufacturer: MAX
• Lisainfo: 21-0340
• Additional information: 21-0340

• Engine Number from: 08137541
• Length [mm]: 61
• Spanner Size: 19
• Colour: grey
• Number of pins: 2
• Thread Size: M12 x 1,5, M12x1,5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Cable Length [mm]: 570
• Sensor Type: Passive sensor
• for OE number: 06A 906 433 C
• Manufacturer: KAMOKA

• Supplementary Article/Info 2: with plug
• Name: Kaabli paranduskomplekt, v„listemperatuuri andur
• Manufacturer: ABA

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Connector Shape: oval
• Number of pins: 2
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Weight [kg]: 0.01
• Warranty: 3 years warranty
• Number of pins: 2
• Manufacturer: SKV GERMANY
• Name: CE 17SKV701

• Engine Number from: 08137541
• Length [mm]: 61
• External Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Colour: grey
• Screw length below head [mm]: 28
• Weight [kg]: 0.023
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: oval
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 46462179
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Engine Number from: 08137541
• Length [mm]: 61
• External Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Colour: grey
• Screw length below head [mm]: 28
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: SWAG
• Name: SW 40 92 8381

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M12x1.5
• Spanner Size: 19
• Corresponds to the original part in colour: green, black, grey, white
• Manufacturer: FAST

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 6081220
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Sensor Type: Active sensor
• for OE number: 06A 905 161 B
• Manufacturer: KAMOKA

• Fitting Position: Rear, Front
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Voltage [V]: 12
• Socket colour: black
• Fabrication Number: EPDC-PL-001
• Manufacturer: NTY
• Name: NTY EPDC-PL-001

• Number of pins: 2
• Connector Shape: oval
• Colour: black
• Mounting Type: Pressed
• Height [mm]: 25.5
• Width [mm]: 29
• for OE number: 1236284, 9152245
• Manufacturer: MEAT&DORIA

• Number of connectors: 2
• Weight [kg]: 0.01
• Name: ANDUR,VŽLISTEMPERATUUR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Equipment: for vehicles with check control system
• Number of pins: 2
• Lisainfo: Water level sensor for washertank
• Additional information: Water level sensor for washertank

• Number of connectors: 2
• Weight [kg]: 0.01
• Manufacturer: SWAG
• Name: SW 99 90 1840

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: both sides, Rear, inner, Front, Centre
• Supplementary Article/Info 2: for retrofitted equipment
• Fabrication Number: EPDC-ME-008
• Manufacturer: NTY

• Number of pins: 2
• Housing Colour: green
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Manufacturer: FAE

• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Connector Shape: D Shape
• Fabrication Number: ECP-BM-009
• Manufacturer: NTY

• Voltage [V]: 12
• Temperature range to [°C]: 250
• Resistor [Ohm]: 5,000
• Number of pins: 2
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: oval
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009104011

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Rear
• Manufacturer Restriction: Opel Parkpilot-Syste
• Vehicle Identification Number (VIN) to: 8209334, 8G085093
• Manufacturer: DELLO AUTOMEGA

• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Number of pins: 3
• Weight [kg]: 0.04
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 17SKV495

• Length [mm]: 59
• Sensor Type: Active sensor
• Manufacturer: KAMOKA

• Vehicle Equipment: for vehicles with check control system
• Supplementary Article/Info 2: for headlamp cleaning system
• Weight [kg]: 0.016
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Left, Right
• Colour: black
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: MAGNETI MARELLI
• Name: MM SDP064

• Length [mm]: 87
• Number of connectors: 2
• Colour: black, white
• Weight [kg]: 0.02
• Name: ANDUR,PESUVEETASE
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Spanner Size: 19
• Thread Size: 12x1.5
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Weight [kg]: 0.03
• Name: VA 700022
• Manufacturer: VALEO

• Fitting Position: Rear
• Colour: black
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: MAGNETI MARELLI
• Name: MM SDP065

• Engine Code: Y 25 DT
• Fitting Position: Rear, both sides
• Colour: black
• Supplementary Article/Supplementary Info: with seal
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Name: Sensor, parkimisabi
• Manufacturer: MAX

• Fitting Position: Front, Rear
• for OE number: 62 38 242
• Length [mm]: 34
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with seal
• Chemical Properties: Paintable
• Number of pins: 3
• Name: SENSOR, PARKIMISABI
• Manufacturer: MAX

• Vehicle type: L14/Y2.5TD
• Fitting Position: Rear, Front
• Sensor Type: Ultrasonic Sensor
• for OE number: 62 38 242
• Length [mm]: 34
• Length from [mm]: 34
• Width [mm]: 37
• Height [mm]: 47
• Colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with seal
• Number of connectors: 3
• Chemical Properties: Paintable
• Name: Parking sensor
• Quality class: PJ

Lisainfo: (kvaliteediklass PJ) Additional information: (kvaliteediklass PJ)

• Number of pins: 2
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 2
• Weight [kg]: 0.08
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY

• Sensor Type: Active sensor
• Number of pins: 3
• Voltage [V]: 12
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX
• Lisainfo: 24-0223
• Additional information: 24-0223

• Fabrication Number: ECM-BM-003

Lisainfo: ENG. 2.0,2.9,3.0,3.9 BMW3(E46),5(E39),7(E38),X5(E53), LAND ROVER FREELANDER I,RANGE ROVER III/IV Additional information: ENG. 2.0,2.9,3.0,3.9 BMW3(E46),5(E39),7(E38),X5(E53), LAND ROVER FREELANDER I,RANGE ROVER III/IV

• Engine Code: Y 25 DT
• Fitting Position: Rear
• Colour: black
• Number of pins: 3
• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with seal
• Name: Sensor, parkimisabi
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Pressure [bar]: 1
• Number of pins: 3
• Temperature range from [°C]: -40
• Temperature range to [°C]: 125
• Length [mm]: 37.3
• Weight [kg]: 0.04
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 17SKV145

• Number of pins: 2
• Length [mm]: 77
• Name: Andur,p””rded
• Manufacturer: MAX

• Required quantity: 1
• Name: CZUJNIK CI—N. POWIETRZA
• Manufacturer: BRM

• Engine Code: Y25DT
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.04
• Name: Andur,Nukkvollipositsioon
• Manufacturer: VAL

• Resistor [Ohm]: 13
• Length [mm]: 27
• Manufacturer: VERNET

• Fitting Position: both sides, Rear
• Quantity: 4
• Supplementary Article/Supplementary Info: with gaskets/seals
• Diameter [mm]: 15.35
• Chemical Properties: Paintable
• Name: Sensor, parkimisabi
• Manufacturer: TRI

• Number of pins: 3
• Connector Shape: rectangular
• Pressure from [kPA]: 30
• Pressure to [kPA]: 240
• for OE number: 13 62 2 246 977, MHK101060
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MEY
• Lisainfo: 3148000038
• Additional information: 3148000038

• Number of pins: 3
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: DLP

• Fitting Position: Rear
• Sensor Type: Ultrasonic Sensor
• Colour: silver
• Number of pins: 4
• Connector Shape: oval
• Housing Colour: blue
• for OE number: 9198958
• Name: Sensor, parkimisabi
• Manufacturer: MD

• Alternatively:
• Number of pins: 3
• Supplementary Article/Info 2: with bracket
• Alternative Repair Kit: 551400
• Manufacturer: ERA

• Measuring Range from [kPa]: 30
• Measuring Range to [kPa]: 240
• Measuring Range from [V]: 0.36
• Measuring Range to [V]: 4.55
• Number of connectors: 3
• Manufacturer: VERNET

• Number of pins: 5
• Voltage [V]: 12
• Housing Type: with housing

• Length [mm]: 59
• Number of connectors: 3
• Weight [kg]: 0.024
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Number of pins: 3
• Connector Shape: oval
• for OE number: 93172012
• Name: Sensor, parkimisabi
• Manufacturer: MD

• Fitting Position: Flywheel side
• Number of pins: 2
• Required quantity: 1
• Supplementary Article/Info 2: for crankshaft, without cable
• Resistor [Ohm]: 580
• Sensor Type: Inductive Sensor
• Number of connectors: 2
• Rated Voltage [V]: 12
• Weight [kg]: 0.069
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 77.4
• Number of connectors: 2
• Weight [kg]: 0.069
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR, VŽNTVOLL
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fuel Mixture Formation: Common Rail (CR)
• Supplementary Article/Info 2: High Pressure Side
• Fabrication Number: EFP-BM-000
• Manufacturer: NTY
• Name: NTY EFP-BM-000

• Number of pins: 5
• Housing Type: with housing
• Manufacturer: JP GROUP
• Lisainfo: Air Mass Sensor
• Additional information: Air Mass Sensor

• Number of pins: 3
• Pressure from [kPA]: 39
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: DLP

• Number of connectors: 3
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• for OE number: 13 62 2 246 977
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Fitting Position: Left
• Colour: grey
• Sensor Type: Active sensor, Hall Sensor
• Number of pins: 3
• Number of connectors: 3
• Rated Voltage [V]: 12
• Supplementary Article/Info 2: with seal ring, without cable
• Housing Colour: black
• Weight [kg]: 0.028
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: Y 25 DT
• Pressure from [kPA]: 26
• Pressure to [kPA]: 250
• Output Voltage, from [V]: 0.27
• Output Voltage, up to [V]: 4.75
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: EPS

• Pressure [Pa] from: 25,000
• Pressure [Pa] to: 250,000
• Voltage [V]: 5
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA
• Name: HE 6PP009400561

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Length [mm]: 59
• Number of connectors: 3
• Weight [kg]: 0.024
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Pressure from [kPA]: 30
• Pressure to [kPA]: 240
• Manufacturer: FAE

• Length [mm]: 59
• Number of connectors: 3
• Supplementary Article/Info 2: for camshaft, without cable, with seal ring
• Required quantity: 1
• Colour: grey, black
• Sensor Type: Hall Sensor, Active sensor
• Number of pins: 3
• Rated Voltage [V]: 12
• Connector Shape: D Shape
• Weight [kg]: 0.024
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Housing Type: with housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Name: OHUMASSIMOOTJA
• Manufacturer: BRM

• Fuel Mixture Formation: Common Rail (CR)
• Supplementary Article/Info 2: High Pressure Side
• Manufacturer: FAST

• for OE number: 504 229 208
• Weight [kg]: 0.046
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fuel Mixture Formation: Common Rail (CR)
• Manufacturer: MEAT&DORIA