• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: oval
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 46462179
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

Vehicle Identification Number (VIN) from: 32000001, 35000001, 36000001, 38000001, 3B000001, 4G000001

• Vehicle Identification Number (VIN) to: 22999999, 25999999, 26999999, 28999999, 2B999999
• Connector Shape: round
• Material: Plastic
• Number of pins: 1
• Plug Type: Male
• Sensor Type: NTC Sensor
• Spanner Size: S13
• Thread Size: NPTF1/8

• Sensor Type: Inductive Sensor
• Number of pins: 3
• Fabrication Number: ECP-PL-014
• Manufacturer: NTY

• Thread Size: M12x1.5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S19
• Thread Size: M12*1,5
• Name: NI 207019
• Manufacturer: NISSENS

Vehicle Identification Number (VIN) from: 32000001, 35000001, 36000001, 38000001, 3B000001, 4G000001 Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Thread Size: M12x1.5
• Spanner Size: 19
• Corresponds to the original part in colour: green, black, grey, white
• Manufacturer: FAST

• Fitting Position: Rear, Front
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Voltage [V]: 12
• Socket colour: black
• Fabrication Number: EPDC-PL-001
• Manufacturer: NTY

• Number of pins: 2
• Housing Colour: black
• Manufacturer: DELPHI
• Name: DE TS10521

• Vehicle Identification Number (VIN) to: 22999999, 25999999, 26999999, 28999999, 2B999999
• Outer Diameter [mm]: 7.4
• Resistor [Ohm]: 2,080, 294
• Supplementary Article/Supplementary Info: with seal
• External Thread [mm]: 12
• Thread Pitch [mm]: 1.5
• Temperature range [°C]: 25, 80
• Mounting Type: Bolted
• Colour: blue
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Number of pins: 2
• Corresponds to the original part in colour: black, white, light blue
• not for trim level: 4mm
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Sensor Type: Passive sensor
• for OE number: 10456604
• Manufacturer: KAMOKA

• Cable Length [mm]: 236
• Fabrication Number: ESS-PL-000
• Manufacturer: NTY

• Vehicle Identification Number (VIN) to: 22999999, 25999999, 26999999, 28999999, 2B999999
• Number of pins: 2
• Thread Size: M12x1,5
• Supplementary Article/Info 2: with seal ring
• Housing Colour: black
• Weight [kg]: 0.032
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M12 x 1,5
• Number of pins: 2
• Manufacturer: ERA

• Fitting Position: both sides, Rear
• Connector Shape: oval
• Number of pins: 4
• Sensor Type: Ultrasonic Sensor
• Fabrication Number: EPDC-PL-002
• Manufacturer: NTY

• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: VER

• Fitting Position: both sides, Rear, inner, Front, Centre
• Supplementary Article/Info 2: for retrofitted equipment
• Fabrication Number: EPDC-ME-008
• Manufacturer: NTY

• Number of pins: 2
• Name: ANDUR, VŽNTVOLL
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
COMBO TOUR, 10.01-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
COMBO TOUR, 10.01-
(kvaliteediklass: PJ)"

• Height [mm]: 39
• Resistor [Ohm]: 2,300
• Number of connectors: 2
• Manufacturer: VERNET

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Engine Code: Z 16 XE
• Sensor Type: Passive sensor
• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Voltage [V]: 12
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MAX

• Required quantity: 1
• Manufacturer: BREMI

• Voltage [V]: 12
• Temperature range to [°C]: 250
• Resistor [Ohm]: 5,000
• Number of pins: 2
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: oval
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009104011

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Vehicle Equipment: for vehicles with check control system
• Weight [kg]: 0.016
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MEY

• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Manufacturer: BREMI

• Cable Length [mm]: 236
• Number of pins: 2
• Manufacturer: DELPHI

• Fabrication Number: ECP-PL-012
• Manufacturer: NTY

• Fitting Position: Front Axle Left
• Quantity: 1
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Name: DE SS11313
• Manufacturer: DELPHI

• Fitting Position: Front Axle Left, Front Axle Right
• Sensor Type: Hall Sensor
• Manufacturer: JP GROUP
• Lisainfo: Sensor, wheel speed
• Additional information: Sensor, wheel speed

Number of pins: 2

Manufacturer: BOSCH

• Sensor Type: Active sensor
• for OE number: 10456585
• Manufacturer: KAMOKA

• Number of pins: 2
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: Z 16 XE
• Pressure from [kPA]: 20
• Pressure to [kPA]: 100
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: MAX

• Resistor [Ohm]: 2,700
• Number of pins: 2
• Sensor Type: Inductive Sensor, Passive sensor
• Number of connectors: 2
• Connector Shape: oval
• Supplementary Article/Info 2: with seal ring, for crankshaft, without cable
• Required quantity: 1
• Operating Mode: Electric
• Socket colour: black
• Supplementary Article/Supplementary Info: with seal
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 39.3
• Number of mounting bores: 1
• Weight [kg]: 0.044
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Colour: black
• Alternatively:
• Number of pins: 2
• Weight [kg]: 0.03
• Alternative Repair Kit: 550052
• Fitting Depth [mm]: 39
• Resistor [kOhm]: 2.4
• Manufacturer: ERA

• Construction Year from: 01.2005
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.05
• Manufacturer: VALEO
• Name: VA 366177

• Number of mounting bores: 1
• Voltage [V]: 12
• Resistor [Ohm]: 2,700
• Sensor Type: Inductive Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA
• Name: HE 6PU009163031

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Voltage [V]: 12
• Number of pins: 2
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: with cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Length [mm]: 413
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PG013114431
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Length [mm]: 310
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 25.5
• Housing Colour: black
• Weight [kg]: 0.072
• Alternative Repair Kit: 550053
• Manufacturer: ERA

• Colour: black
• Number of pins: 2
• Weight [kg]: 0.03
• Fitting Depth [mm]: 39
• Resistor [kOhm]: 2.4
• Manufacturer: ERA

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Manufacturer: BREMI

• Fitting Position: both sides, Rear
• Quantity: 4
• Supplementary Article/Supplementary Info: with gaskets/seals
• Diameter [mm]: 15.35
• Chemical Properties: Paintable
• Name: Sensor, parkimisabi
• Manufacturer: TRI

• Supplementary Article/Info 2: with cable
• Length [mm]: 315
• Height [mm]: 25.8
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Measuring Range from [kPa]: 20
• Measuring Range to [kPa]: 100
• Measuring Range from [V]: 0.525
• Measuring Range to [V]: 4.775
• Number of connectors: 3
• Manufacturer: VERNET

• Length [mm]: 410
• Weight [kg]: 0.052, 0.054
• Number of connectors: 3
• Supplementary Article/Info 2: for camshaft, with cable
• Required quantity: 1
• Colour: black
• Cable Length [mm]: 315
• Number of pins: 3
• Rated Voltage [V]: 12
• Number of mounting bores: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 265
• Number of pins: 3
• Manufacturer: DELPHI

• Fitting Position: Front Axle Left
• Required quantity: 1
• Version: SPEED
• Fitting Depth [mm]: 65.7
• Number of pins: 3
• Technical Information: This is not an ABS sensor, but a speed sensor
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Fitting Position: Rear
• Chemical Properties: Over-paintable
• Colour: black
• Number of pins: 3
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Name: Sensor, parkimisabi
• Manufacturer: MEY

• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Fitting Position: before catalytic converter
• Cable Length [mm]: 520
• Warranty: 3 years warranty
• Name: CE 09SKV132
• Manufacturer: ESEN SKV

• Voltage [V]: 12
• Corresponds to the original part in colour: blue, grey
• Length [mm]: 75
• Sensor Type: Hall Sensor
• Number of pins: 3
• Number of mounting bores: 2
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PU009121931
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Required quantity: 4
• Fitting Position: both sides, Rear
• Number of pins: 4
• Chemical Properties: Paintable
• Mounting Type: Plugged
• Socket colour: silver
• Shape: Cylindrical
• Connector Shape: oval
• Supplementary Article/Supplementary Info: with fastening ring
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PX358141571
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Cable Length [mm]: 320
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Fitting Position: Rear
• Manufacturer: METZGER

• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PP009400011
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 520
• Manufacturer: DELPHI
• Name: DE ES20291-12B1

• Lambda Sensor: Heated, Diagnostic Probe
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 817
• Weight [kg]: 0.123
• Name: SW 33 10 4118
• Manufacturer: SWAG

Vehicle Identification Number (VIN) to: *********1G******, 1H, 12999999, 15999999, 16999999, 18999999 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: Z 16 XE
• Vehicle Identification Number (VIN) to: 1-999999
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

Lambda Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Vehicle Identification Number (VIN) to: 12999999, 16999999, 18999999
• Block Separation:
• Vehicle Identification Number (VIN) from: 22000001, 25000001, 26000001, 28000001
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe
• Cable Length [mm]: 630
• Number of pins: 4
• Exhaust System: before catalytic converter
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PA358066001
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Vehicle Identification Number (VIN) to: 12999999, 16999999, 18999999
• Manufacturer: BOSCH

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: with attachment material
• Inner Diameter [mm]: 56
• Outer Diameter [mm]: 136
• Bolt Hole Circle Ø [mm]: 100
• Number of Teeth, ABS ring: 48
• Rim Hole Number: 4
• Fastening Type: Four-point attachment
• Bearing Type: Ball Bearing
• Name: RATTARUMM
• Manufacturer: MEY

Supplementary Article/Info 2: with integrated ABS sensor, with integrated wheel bearing General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Vehicle Identification Number (VIN) from: 22000001, 25000001, 26000001, 28000001
• Number of circuits: 4
• Overall Length [mm]: 314
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Number of pins: 6
• Transmission Type: Automatic Transmission
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Code Letter: BL
• Colour: black
• Manufacturer: METZGER