• Fitting Position: Front Axle
• Brake Disc Type: internally vented, Vented
• Outer Diameter [mm]: 256
• Brake Disc Thickness [mm]: 24
• Number of Holes: 4
• Surface: Coated
• Lisainfo: Brake Disc
• Additional information: Brake Disc

• Rim Hole Number: 4
• Fitting Position: Rear Axle
• Outer Diameter [mm]: 240
• Brake Disc Thickness [mm]: 9.8
• Minimum thickness [mm]: 8
• Brake Disc Type: solid
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 100
• Height [mm]: 42
• Centering Diameter [mm]: 57
• Inner Diameter [mm]: 140.8
• Bore Ø [mm]: 14
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Brake Disc Type: solid
• Outer Diameter [mm]: 240
• Brake Disc Thickness [mm]: 9.9
• Centering Diameter [mm]: 57
• Height [mm]: 42
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 100
• Supplementary Article/Info 2: with bolts/screws
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 8
• Name: PIDURIKETAS
• Manufacturer: MAX

• Brake Disc Hub Height [mm]: 31.8
• Fitting Position: Rear Axle
• Rim Hole Number: 4
• Height [mm]: 42
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 9.8
• Minimum thickness [mm]: 8
• Outer Diameter [mm]: 240
• Centering Diameter [mm]: 57
• Bolt Hole Circle Ø [mm]: 100
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 240
• Brake Disc Thickness [mm]: 9.9
• Centering Diameter [mm]: 57
• Height [mm]: 42
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 100
• Supplementary Article/Info 2: with bolts/screws
• Surface: Painted
• Minimum thickness [mm]: 8
• Name: PIDURIKETAS
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 240
• Brake Disc Thickness [mm]: 10
• Height [mm]: 42
• Minimum thickness [mm]: 8
• Inner Diameter [mm]: 141
• Bolt Hole Circle Ø [mm]: 100
• Centering Diameter [mm]: 57
• Hole Arrangement/Number: 04/05
• Wheel Bolt Bore Ø [mm]: 14.2
• Packaging length [cm]: 24.8
• Packaging width [cm]: 24.8
• Packaging height [cm]: 10.5
• Weight [kg]: 3.1
• Manufacturer: MINTEX

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Brake Disc Thickness [mm]: 10
• Rim Hole Number: 4
• Number of mounting bores: 1
• Thickness [mm]: 42
• Outer Diameter [mm]: 240
• Bolt Hole Circle Ø [mm]: 100
• Surface: Coated
• Brake Disc Type: solid
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 8
• Centering Diameter [mm]: 57
• Weight [kg]: 3.15
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Brake Disc Thickness [mm]: 10
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 42
• Outer Diameter [mm]: 264
• Bolt Hole Circle Ø [mm]: 110
• Surface: Coated
• Brake Disc Type: solid
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 8
• Centering Diameter [mm]: 66
• Weight [kg]: 3.8
• for OE number: 05 69 109
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Number of Holes: 4
• Test Mark: E1 90R-02C0100/1602
• Supplementary Article/Info 2: without wheel bearing, without ABS sensor ring
• Surface: Oiled
• Machining: Untreated
• Outer Diameter [mm]: 240
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Centering Diameter [mm]: 57
• Height [mm]: 42
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE BG3403

• Brake Disc Type: Vented
• Outer Diameter [mm]: 256
• Brake Disc Thickness [mm]: 23.9
• Number of Holes: 4
• Centering Diameter [mm]: 60
• Height [mm]: 41.1
• Bolt Hole Circle Ø [mm]: 100
• Fitting Position: Front Axle
• Minimum thickness [mm]: 21
• Name: PIDURIKETAS
• Manufacturer: MAX

• Brake Disc Thickness [mm]: 10
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 42.1
• Outer Diameter [mm]: 264
• Bolt Hole Circle Ø [mm]: 110
• Surface: Coated
• Brake Disc Type: solid
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 8
• Centering Diameter [mm]: 65.5
• Weight [kg]: 3.8
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Rim Hole Number: 4
• Fitting Position: Front Axle
• Outer Diameter [mm]: 256
• Brake Disc Thickness [mm]: 23.8
• Minimum thickness [mm]: 21
• Brake Disc Type: Vented
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 100
• Height [mm]: 41.1
• Centering Diameter [mm]: 60
• Inner Diameter [mm]: 123
• Bore Ø [mm]: 14.3
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Number of Holes: 5
• Test Mark: E4 90R-02C0747/2816
• Supplementary Article/Info 2: without wheel bearing, without ABS sensor ring
• Surface: Oiled
• Machining: Untreated
• Outer Diameter [mm]: 264
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Centering Diameter [mm]: 65.5
• Height [mm]: 42
• Name: DE BG3406
• Manufacturer: DELPHI

• Brake Disc Thickness [mm]: 10
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 42.1
• Outer Diameter [mm]: 264
• Bolt Hole Circle Ø [mm]: 110
• Surface: Coated
• Brake Disc Type: solid
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 8
• Centering Diameter [mm]: 65.5
• Weight [kg]: 3.8
• Name: SW 40 91 7213
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Braking System: for vehicles with disc brakes on the rear axle
• Outer Diameter [mm]: 240
• Brake Disc Thickness [mm]: 10
• Brake Disc Type: solid
• Minimum thickness [mm]: 8
• Height [mm]: 42
• Bolt Hole Circle Ø [mm]: 100
• Centering Diameter [mm]: 57
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Surface: Painted
• Number of Holes: 4
• Name: PIDURIKETAS
• Manufacturer: QUARO

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 240
• Brake Disc Thickness [mm]: 9.9
• Minimum thickness [mm]: 8
• Centering Diameter [mm]: 57
• Height [mm]: 42
• Number of Holes: 4
• Thread Size: 14
• Bolt Hole Circle Ø [mm]: 100
• Supplementary Article/Info 2: with bolts/screws
• Colour: black
• Surface: Painted
• Test Mark: E190R-02C0190/0543
• Name: PIDURIKETAS
• Manufacturer: TRW
• Quality class: Q

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Outer Diameter [mm]: 256
• Brake Disc Thickness [mm]: 23.9
• Number of Holes: 4
• Centering Diameter [mm]: 60
• Height [mm]: 41.1
• Bolt Hole Circle Ø [mm]: 100
• Surface: Painted
• Minimum thickness [mm]: 21
• Name: PIDURIKETAS
• Manufacturer: MAX

• Parameter: DP1010.11.0153
• Rim Hole Number: 4
• Fitting Position: Rear Axle
• Height [mm]: 42
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Outer Diameter [mm]: 240
• Number of Holes: 1
• Centering Diameter [mm]: 57
• Manufacturer: DRIVE

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 239.8
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Height [mm]: 42
• Bolt Hole Circle Ø [mm]: 100
• Brake Disc Type: solid
• Centering Diameter [mm]: 57
• Number of Holes: 4
• Surface: Coated
• Supplementary Article/Info 2: with bolts/screws
• Fulfils ECE norm: ECE-R90
• Drill Diameter, up to [mm]: 14.2
• Name: PIDURIKETAS
• Manufacturer: BOS

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 240
• Height [mm]: 42
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Centering Diameter [mm]: 57
• Bolt Hole Circle Ø [mm]: 100
• Wheel Bolt Bore Ø [mm]: 14
• Number of Holes: 4
• Brake Disc Type: solid
• Required quantity: 2
• Name: PIDURIKETAS
• Manufacturer: MEY

• Fitting Position: Front Axle
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 256
• Brake Disc Thickness [mm]: 24
• Height [mm]: 41
• Minimum thickness [mm]: 21
• Surface: Coated
• Inner Diameter [mm]: 123
• Bolt Hole Circle Ø [mm]: 100
• Centering Diameter [mm]: 60
• Hole Arrangement/Number: 04/07
• Wheel Bolt Bore Ø [mm]: 14.2
• Packaging length [cm]: 27.8
• Packaging width [cm]: 27.8
• Packaging height [cm]: 10.5
• Weight [kg]: 5.2
• Manufacturer: MINTEX

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 240
• Brake Disc Thickness [mm]: 10
• Height [mm]: 42
• Minimum thickness [mm]: 8
• Surface: Coated
• Inner Diameter [mm]: 141
• Bolt Hole Circle Ø [mm]: 100
• Centering Diameter [mm]: 57
• Hole Arrangement/Number: 04/05
• Wheel Bolt Bore Ø [mm]: 14.2
• Weight [kg]: 3.1
• Name: HE 8DD355106091
• Manufacturer: HELLA PAGID

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Rim Hole Number: 4
• Fitting Position: Rear Axle
• Outer Diameter [mm]: 240
• Brake Disc Thickness [mm]: 9.8
• Minimum thickness [mm]: 8
• Brake Disc Type: solid
• Surface: Coated
• Number of Holes: 4
• Bolt Hole Circle Ø [mm]: 100
• Height [mm]: 42
• Centering Diameter [mm]: 57
• Inner Diameter [mm]: 140.8
• Bore Ø [mm]: 14
• Supplementary Article/Info 2: with bolts/screws
• Test Mark: E1 90R-02C0165/1152
• MAPP code available:
• Name: PIDURIKETAS
• Manufacturer: ATE
• Quality class: Q

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 10
• Number of Holes: 4
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 42
• Centering Diameter [mm]: 57
• Outer Diameter [mm]: 240
• Surface: Coated
• Minimum thickness [mm]: 8
• Tightening Torque [Nm]: 110
• Manufacturer: BREMBO
• Name: BR 08.7626.11
• Quality class: Q

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Number of Holes: 4
• Test Mark: E1 90R-02C0277/1786
• Supplementary Article/Info 2: without wheel bearing, without ABS sensor ring
• Surface: Oiled
• Machining: Untreated
• Outer Diameter [mm]: 256
• Brake Disc Thickness [mm]: 24
• Minimum thickness [mm]: 21
• Centering Diameter [mm]: 60
• Height [mm]: 41
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE BG3404

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 10
• Number of Holes: 5
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 42
• Centering Diameter [mm]: 65
• Outer Diameter [mm]: 264
• Surface: Coated
• Minimum thickness [mm]: 8
• Tightening Torque [Nm]: 110
• Name: BR 08.7627.11
• Manufacturer: BREMBO

• Brake Disc Thickness [mm]: 25
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 42
• Outer Diameter [mm]: 280
• Bolt Hole Circle Ø [mm]: 110
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 22
• Centering Diameter [mm]: 70
• Weight [kg]: 3.35
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Outer Diameter [mm]: 256
• Brake Disc Thickness [mm]: 24
• Brake Disc Type: internally vented
• Minimum thickness [mm]: 21
• Height [mm]: 41
• Bolt Hole Circle Ø [mm]: 100
• Centering Diameter [mm]: 60
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Surface: Painted
• Number of Holes: 4
• Name: PIDURIKETAS
• Manufacturer: QUARO

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Outer Diameter [mm]: 240
• Brake Disc Thickness [mm]: 10
• Height [mm]: 42
• Minimum thickness [mm]: 8
• Surface: Coated
• Inner Diameter [mm]: 141
• Bolt Hole Circle Ø [mm]: 100
• Centering Diameter [mm]: 57
• Hole Arrangement/Number: 04/05
• Wheel Bolt Bore Ø [mm]: 14.2
• Packaging length [cm]: 24.8
• Packaging width [cm]: 24.8
• Packaging height [cm]: 10.5
• Weight [kg]: 3.1
• Name: PIDURIKETAS
• Manufacturer: TEX

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Brake Disc Thickness [mm]: 25
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 42
• Outer Diameter [mm]: 280
• Bolt Hole Circle Ø [mm]: 110
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 22
• Centering Diameter [mm]: 70
• Weight [kg]: 3.35
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Test Mark: R90 Homologated
• Height [mm]: 42
• Weight [kg]: 6.29
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Outer Diameter [mm]: 240
• Number of Holes: 4
• Centering Diameter [mm]: 57
• Tightening Torque [Nm]: 110
• Bolt Hole Circle Ø [mm]: 100
• Surface: Coated
• Packing Type: Box
• Quantity Unit: Set
• Supplementary Article/Info 2: with bolts/screws
• Version: JC
• Packaging length [cm]: 26
• Packaging width [cm]: 26
• Packaging height [cm]: 10
• Manufacturer: JURID

• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Outer Diameter [mm]: 256
• Brake Disc Thickness [mm]: 23.9
• Minimum thickness [mm]: 21
• Number of Holes: 4
• Centering Diameter [mm]: 60
• Height [mm]: 41.1
• Thread Size: 14,2
• Bolt Hole Circle Ø [mm]: 100
• Colour: black
• Surface: Painted
• Test Mark: E190R-02C0176/0531
• Name: PIDURIKETAS
• Manufacturer: TRW
• Quality class: Q

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Height [mm]: 42
• Weight [kg]: 7.52
• Brake Disc Type: solid
• Brake Disc Thickness [mm]: 10
• Minimum thickness [mm]: 8
• Outer Diameter [mm]: 264
• Number of Holes: 5
• Centering Diameter [mm]: 65
• Tightening Torque [Nm]: 110
• Bolt Hole Circle Ø [mm]: 110
• Surface: Coated
• Packing Type: Box
• Quantity Unit: Set
• Supplementary Article/Info 2: with bolts/screws
• Version: JC
• Packaging length [cm]: 28
• Packaging width [cm]: 28
• Packaging height [cm]: 15
• Manufacturer: JURID

• Fitting Position: Rear Axle
• Brake Disc Type: solid, slotted
• Brake Disc Thickness [mm]: 10
• Number of Holes: 4
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 42
• Centering Diameter [mm]: 57
• Outer Diameter [mm]: 240
• Surface: Coated
• Minimum thickness [mm]: 8
• Tightening Torque [Nm]: 110
• Manufacturer: BREMBO

Brief Information: For maximum performance in wet conditions, Brembo Max is the affordable grooved and painted disc for the enthusiast.

• Brake Disc Thickness [mm]: 25
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 42
• Outer Diameter [mm]: 280
• Bolt Hole Circle Ø [mm]: 110
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 22
• Centering Diameter [mm]: 70
• Weight [kg]: 3.35
• Name: SW 40 91 7211
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Outer Diameter [mm]: 255.8
• Brake Disc Thickness [mm]: 23.9
• Minimum thickness [mm]: 21
• Height [mm]: 41.1
• Bolt Hole Circle Ø [mm]: 100
• Brake Disc Type: Vented
• Centering Diameter [mm]: 60.03
• Number of Holes: 4
• Surface: Coated
• Machining: Alloyed/High-carbon
• Fulfils ECE norm: ECE-R90
• Drill Diameter, up to [mm]: 14.2
• Name: PIDURIKETAS
• Manufacturer: BOS

• Fitting Position: Front Axle
• Outer Diameter [mm]: 256
• Brake Disc Thickness [mm]: 24
• Brake Disc Type: internally vented
• Minimum thickness [mm]: 21
• Height [mm]: 41
• Bolt Hole Circle Ø [mm]: 100
• Centering Diameter [mm]: 60
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Surface: Painted
• Machining: High-carbon
• Number of Holes: 4
• Name: Piduriketas
• Manufacturer: QUARO

• Brake Disc Thickness [mm]: 25
• Rim Hole Number: 4
• Number of mounting bores: 1
• Thickness [mm]: 43.2
• Outer Diameter [mm]: 279.7
• Bolt Hole Circle Ø [mm]: 100
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 22
• Centering Diameter [mm]: 60
• Weight [kg]: 6.65
• Name: SW 40 94 4123
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Brake Disc Type: solid, slotted
• Brake Disc Thickness [mm]: 10
• Number of Holes: 5
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 42
• Centering Diameter [mm]: 65
• Outer Diameter [mm]: 264
• Surface: Coated
• Minimum thickness [mm]: 8
• Tightening Torque [Nm]: 110
• Manufacturer: BREMBO
• Name: BR 08.7627.75

Brief Information: For maximum performance in wet conditions, Brembo Max is the affordable grooved and painted disc for the enthusiast.

• Rim Hole Number: 4
• Fitting Position: Front Axle
• Outer Diameter [mm]: 256
• Brake Disc Thickness [mm]: 23.8
• Minimum thickness [mm]: 21
• Brake Disc Type: Vented
• Machining: Alloyed/High-carbon
• Surface: Coated
• Number of Holes: 4
• Supplementary Article/Info 2: with bolts/screws
• MAPP code available:
• Bolt Hole Circle Ø [mm]: 100
• Height [mm]: 41.1
• Centering Diameter [mm]: 60
• Inner Diameter [mm]: 123
• Bore Ø [mm]: 14.3
• Test Mark: E1 90R-02C0115/0462
• Name: PIDURIKETAS
• Manufacturer: ATE
• Quality class: Q

• Fitting Position: Front Axle
• Test Mark: R90 Homologated
• Height [mm]: 41
• Weight [kg]: 10.3
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 24
• Minimum thickness [mm]: 21
• Outer Diameter [mm]: 256
• Number of Holes: 4
• Centering Diameter [mm]: 60
• Tightening Torque [Nm]: 110
• Bolt Hole Circle Ø [mm]: 100
• Surface: Coated
• Packing Type: Box
• Quantity Unit: Set
• Supplementary Article/Info 2: with bolts/screws
• Version: JC
• Packaging length [cm]: 29
• Packaging width [cm]: 29
• Packaging height [cm]: 11
• Manufacturer: JURID

• Fitting Position: Front Axle
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 256
• Brake Disc Thickness [mm]: 24
• Height [mm]: 41
• Minimum thickness [mm]: 21
• Surface: Coated
• Inner Diameter [mm]: 123
• Bolt Hole Circle Ø [mm]: 100
• Centering Diameter [mm]: 60
• Hole Arrangement/Number: 04/07
• Wheel Bolt Bore Ø [mm]: 14.2
• Packaging length [cm]: 27.8
• Packaging width [cm]: 27.8
• Packaging height [cm]: 10.5
• Weight [kg]: 5.2
• Name: PIDURIKETAS
• Manufacturer: TEX

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Rear Axle
• Brake Disc Type: solid, Perforated
• Brake Disc Thickness [mm]: 10
• Number of Holes: 5
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 42
• Centering Diameter [mm]: 65
• Outer Diameter [mm]: 264
• Surface: Coated
• Minimum thickness [mm]: 8.5
• Tightening Torque [Nm]: 110
• Technical Information: ECE R 90 Homologation.
• Name: BR 08.7627.1X
• Manufacturer: BREMBO

General Information: The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.

• Fitting Position: Rear Axle
• Brake Disc Type: Perforated, solid
• Brake Disc Thickness [mm]: 10
• Number of Holes: 4
• Supplementary Article/Info 2: with bolts/screws
• Height [mm]: 42
• Centering Diameter [mm]: 57
• Outer Diameter [mm]: 240
• Surface: Coated
• Minimum thickness [mm]: 8.5
• Tightening Torque [Nm]: 110
• Technical Information: ECE R 90 Homologation.
• Name: BR 08.7626.1X
• Manufacturer: BREMBO

General Information: The specific drilling of Brembo Xtra brake discs provides a brilliant and efficient performance in any braking condition, to emphasise the driving style of true enthusiasts.