• Filter type: Spin-on Filter
• Height [mm]: 163
• Outer Diameter [mm]: 55
• Inlet Ø [mm]: 7.9
• Outlet Ø [mm]: 7.9
• Manufacturer: JP GROUP
• Lisainfo: Fuel filter
• Additional information: Fuel filter

• Filter type: In-Line Filter
• Height [mm]: 163
• Outer Diameter [mm]: 55
• Inlet Ø [mm]: 7.9
• Outlet Ø [mm]: 7.9
• Outer Diameter 1 [mm]: 55
• SVHC: No SVHC present!
• Name: KšTUSEFILTER
• Manufacturer: MAN
• Lisainfo: WK 512 MAN
• Additional information: WK 512 MAN

• Fitting Position: Rear Axle
• Brake System: Lucas / TRW
• Height [mm]: 42.8
• Width [mm]: 95
• Thickness [mm]: 15.3
• Wear Warning Contact: with acoustic wear warning
• Manufacturer: JP GROUP
• Lisainfo: Brake pad set, rear, 15.2 mm
• Additional information: Brake pad set, rear, 15.2 mm

• Fitting Position: Rear Axle
• Brake System: Bosch
• Height [mm]: 42.7
• Width [mm]: 105
• Thickness [mm]: 16.5
• Wear Warning Contact: with acoustic wear warning
• Manufacturer: JP GROUP
• Lisainfo: Brake pad set, rear, 16.5 mm
• Additional information: Brake pad set, rear, 16.5 mm

• Fitting Position: Front Axle
• Brake System: Teves
• Height 1 [mm]: 62
• Height 2 [mm]: 63
• Width 1 [mm]: 177.6
• Width 2 [mm]: 160
• Thickness [mm]: 17.3
• Wear Warning Contact: with acoustic wear warning
• Lisainfo: Brake pad set, front, 17.5 mm
• Additional information: Brake pad set, front, 17.5 mm

• Vehicle Identification Number (VIN) to: 18999999
• Inner brake drum diameter [mm]: 230
• Width [mm]: 42
• Fitting Position: Rear Axle
• Manufacturer: JP GROUP
• Lisainfo: Brake shoe set, 230x40 mm
• Additional information: Brake shoe set, 230x40 mm

• Vehicle Identification Number (VIN) to: 18999999
• Fitting Position: Rear Axle
• Width [mm]: 42
• Brake System: TRW
• Inner brake drum diameter [mm]: 230
• Manufacturer: LPR
• Name: LPR 07200
• Additional information: FE07200
• Lisainfo: FE07200

• Outer Diameter 1 [mm]: 55
• Outer Diameter 2 [mm]: 59
• Inner Diameter 1 [mm]: 8
• Inner Diameter 2 [mm]: 8
• Height [mm]: 164
• Filter type: In-Line Filter
• Manufacturer: DENCKERMANN FILTRY

• Filter type: In-Line Filter
• Height [mm]: 163
• Outer Diameter [mm]: 55
• Inlet Ø [mm]: 7.9
• Outlet Ø [mm]: 7.9
• Outer Diameter 1 [mm]: 55
• Name: KšTUSEFILTER
• Manufacturer: MAX

• Filter type: In-Line Filter
• Fuel Type: Petrol
• Height [mm]: 162
• Outer Diameter [mm]: 59
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• for OE number: 46403932
• Manufacturer: KAMOKA FILTRY PALIWA

• Height [mm]: 163
• Outer Diameter [mm]: 56
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Filter type: In-Line Filter
• Name: CFD DFF0101
• Manufacturer: DACO

• Height [mm]: 162
• Fuel Type: Petrol
• Filter type: In-Line Filter
• Fitted Diameter1/Fitted Diameter2 [mm]: 8 / 8
• Outer Diameter 1 [mm]: 61
• Outer Diameter 2 [mm]: 55
• Manufacturer: DRIVE

• Filter type: In-Line Filter
• Fuel Type: Petrol
• Height [mm]: 163
• Outer Diameter [mm]: 56
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• for OE number: 46403933
• Manufacturer: KAMOKA FILTRY PALIWA

• Filter type: In-Line Filter
• Height [mm]: 164
• Outer Diameter [mm]: 60
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Name: KšTUSEFILTER
• Manufacturer: ALC

• Filter type: In-Line Filter
• Length [mm]: 79, 162
• Housing material: Metal
• Outer Diameter [mm]: 55, 59.5
• Pipe Ø [mm]: 7.95
• Weight [kg]: 0.126
• Name: KšTUSEFILTER
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Spin-on Filter
• Height [mm]: 163
• Inner Diameter [mm]: 8
• Outer Diameter [mm]: 55
• Lisainfo: (kvaliteediklass: PJ)
• Name: Fuel filter
• Quality class: PJ
• Additional information: (kvaliteediklass: PJ)

• Construction Year from: 01.2005
• Filter type: In-Line Filter
• Height [mm]: 162
• Outer Diameter [mm]: 61
• Outer Diameter 1 [mm]: 56
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Weight [kg]: 0.13
• Manufacturer: VALEO
• Name: VA 587008

• Height [mm]: 162
• Outer Diameter [mm]: 60
• Packing Type: Box
• Filter type: In-Line Filter
• Inlet Ø [mm]: 11
• Outlet Ø [mm]: 7.8
• Packaging length [cm]: 6.2
• Packaging width [cm]: 6.2
• Packaging height [cm]: 17.3
• Name: CH CFF100225
• Manufacturer: CHAMPION

• Filter type: In-Line Filter
• Housing material: Metal
• Length [mm]: 163
• Outer Diameter [mm]: 55
• Number of connectors: 2
• Pipe Ø [mm]: 8
• Weight [kg]: 0.159
• Name: KšTUSEFILTER
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: In-Line Filter
• Length [mm]: 163
• Housing material: Metal
• Outer Diameter [mm]: 55
• Number of connectors: 2
• Pipe Ø [mm]: 8
• Weight [kg]: 0.159
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Diameter [mm]: 55
• Filter type: In-Line Filter
• Material: Steel
• Height [mm]: 163
• Name: KšTUSEFILTER
• Manufacturer: MEY

• Filter type: In-Line Filter
• Height [mm]: 163
• Outer Diameter [mm]: 59
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Filter type: Filter Insert
• Diameter 1 [mm]: 55
• Diameter 2 [mm]: 7.9
• Diameter 3 [mm]: 7.9
• Height [mm]: 163
• Name: CL MB 985
• Manufacturer: CLEAN FILTERS

• Height [mm]: 163
• Outer Diameter [mm]: 55
• Outer Diameter 1 [mm]: 55
• Outlet Ø [mm]: 7.9
• Inlet Ø [mm]: 7.9
• Filter type: Filter Insert
• Manufacturer: SOFIMA

• Filter type: In-Line Filter
• Outer Diameter [mm]: 60
• Overall Length [mm]: 163
• Manufacturer: HENGST FILTER

• Filter type: In-Line Filter
• Diameter [mm]: 54.4
• Height [mm]: 160.5
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 7.9
• Net Weight [g]: 145
• Packaging height [cm]: 16.2
• Packaging length [cm]: 6.2
• Packaging width [cm]: 6.2
• Manufacturer: KNECHT
• Name: KN KL83

• Fuel Mixture Formation: Petrol Injection
• Filter type: In-Line Filter
• Diameter [mm]: 55
• Height [mm]: 166
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Name: KšTUSEFILTER
• Manufacturer: BOS

• Width [mm]: 23
• Material: Plastic
• Inner Diameter [mm]: 8
• Outer Diameter [mm]: 53
• Name: CA 500101
• Manufacturer: CAFFARO

• Fitting Position: Rear Axle
• Width 1 [mm]: 104.6
• Height [mm]: 42.7
• Thickness [mm]: 16.5
• Wear Warning Contact: with acoustic wear warning
• Brake System: Bosch
• Test Mark: ECE R90
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 95.5
• Height [mm]: 43
• Thickness [mm]: 15
• WVA Number: 23417
• Test Mark: ECE R90 APPROVED
• Manufacturer: ASHIKA
• Lisainfo: 51-0K-K12
• Additional information: 51-0K-K12

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 95.5
• Height [mm]: 43
• Thickness [mm]: 15
• WVA Number: 23417
• Test Mark: ECE R90 APPROVED
• Manufacturer: JAPKO

• Fitting Position: Rear Axle
• Wear Warning Contact: with acoustic wear warning
• Brake System: Lucas - TRW
• Width [mm]: 96
• Height [mm]: 43
• Thickness [mm]: 15
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 95.5
• Height [mm]: 43
• Thickness [mm]: 15
• WVA Number: 23417
• Test Mark: ECE R90 APPROVED
• Manufacturer: JAPANPARTS

• Width 1 [mm]: 26
• Outer Diameter 1 [mm]: 52
• Manufacturer: SNR /NTN-SNR/

• Fitting Position: Rear Axle
• Height [mm]: 42.7
• Thickness [mm]: 15.2
• Wear Warning Contact: excl. wear warning contact
• Brake System: Lucas
• Width [mm]: 96
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Width [mm]: 95.3
• Height [mm]: 42.8
• Thickness [mm]: 15.3
• Wear Warning Contact: with acoustic wear warning
• Brake System: Lucas / TRW
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle
• Wear Warning Contact: with acoustic wear warning
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Bosch
• Width [mm]: 105
• Height [mm]: 43
• Thickness [mm]: 16
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Vehicle Identification Number (VIN) from: *********2*000001
• Length [mm]: 96
• Width [mm]: 43
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 15
• Wear Warning Contact: with acoustic wear warning
• Weight [kg]: 0.874
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: BLP
• Lisainfo: ADG042116
  Koos plekkide ja poltidega
• Additional information: ADG042116
  Koos plekkide ja poltidega

Supplementary Article/Info 2: with anti-squeak plate, with brake caliper screws, with fastening material General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Width [mm]: 104.6
• Height [mm]: 42.7
• Thickness [mm]: 16.5
• Wear Warning Contact: with acoustic wear warning
• Brake System: Bosch
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Width [mm]: 20
• Number of Teeth: 162
• Belts: with rounded tooth profile
• Weight [kg]: 0.136
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Height [mm]: 42.6
• Thickness [mm]: 16.9
• Wear Warning Contact: with acoustic wear warning
• Brake System: Bosch
• Fitting Position: Rear Axle
• Width [mm]: 105
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Outer Diameter [mm]: 59
• Width [mm]: 22
• Lisainfo: Tension pulley for timing belt
• Additional information: Tension pulley for timing belt

• Width [mm]: 22
• Outer Diameter [mm]: 59
• Manufacturer: KAMOKA

• Diameter [mm]: 60
• Width [mm]: 22
• Tensioner Pulley Actuation: Automatic
• Supplementary Article/Supplementary Info: with attachment material
• Name: SEADE-/JUHTRULL,HAMMASRIHM
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Width [mm]: 95.5
• Height [mm]: 42.5
• Thickness [mm]: 15.2
• Number of wear indicators [per axle]: 2
• Wear Warning Contact: with acoustic wear warning
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Brake System: TRW
• Length [mm]: 95.4
• Thickness [mm]: 15
• Wear Warning Contact: with acoustic wear warning
• Height [mm]: 42.7
• Manufacturer: AUTO-GH

• Driven Units: Camshaft
• Trim Level: HSN
• for OE number: 95522524
• Number of Teeth: 162
• Width [mm]: 20
• Name: HAMMASRIHM
• Manufacturer: DAY

• Engine Number to: 02HL5117, 20041690
• Block Separation:
• Engine Number from: 02HL5118, 20041691
• Number of Teeth: 162
• Length [mm]: 1,296
• Width [mm]: 20
• Tooth Pitch [mm]: 8
• Name: HAMMASRIHM
• Manufacturer: BOS

• Fitting Position: Front Axle
• Width 1 [mm]: 160
• Height 1 [mm]: 63
• Thickness 1 [mm]: 17.5
• Width 2 [mm]: 177.6
• Height 2 [mm]: 62
• Thickness 2 [mm]: 18.5
• Brake System: ATE
• Test Mark: ECE R90
• Manufacturer: ABAKUS DEPO/LORO

Wear Warning Contact: without integrated wear warning contact, with acoustic wear warning General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Vehicle Identification Number (VIN) from: *********2*000001
• Length [mm]: 95.5
• Width [mm]: 42.5
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 14.7
• Wear Warning Contact: with acoustic wear warning
• Weight [kg]: 0.874
• Manufacturer: FEBI HAMULCE

Supplementary Article/Info 2: with anti-squeak plate, with brake caliper screws, with fastening material General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• FMSI Code: D1362-8471
• Test Mark: E1 90R-01878/1003
• WVA Number: 23417 23654 23655
• Brake System: TRW
• Supplementary Article/Info 2: with adhesive film
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: with acoustic wear warning
• Width 1 [mm]: 95.4
• Width 2 [mm]: 95.3
• Height 1 [mm]: 42.8
• Height 2 [mm]: 42.8
• Thickness 1 [mm]: 15.2
• Thickness 2 [mm]: 15.2
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP1717

• Fitting Position: Rear Axle
• Diameter [mm]: 230
• Width [mm]: 42
• Supplementary Article/Supplementary Info: with accessories
• Net weight [kg]: 2.02
• Name: PIDURIKLOTSIDE KOMPLEKT
• Manufacturer: NK

• Driven Units: Camshaft
• Number of Teeth: 162
• Packaging length [cm]: 25.5
• Packaging width [cm]: 16
• Packaging height [cm]: 3
• Weight [kg]: 0.165
• Width [mm]: 20
• Tooth Pitch [mm]: 8
• Technical Information: Please note: Technical Info in the attachment
• Name: HAMMASRIHM
• Manufacturer: CON

• Fitting Position: Rear Axle
• Braking System: for vehicles with disc brakes on the rear axle
• Width [mm]: 96
• Height [mm]: 42.7
• Thickness [mm]: 15.2
• Wear Warning Contact: excl. wear warning contact
• Brake System: Lucas
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: QUARO

• Fitting Position: Front Axle
• Thickness [mm]: 18.4
• Width [mm]: 62, 63
• Length [mm]: 178
• Length 1 [mm]: 160
• Brake System: ATE
• WVA Number: 23063, 23064, 23066, 23067
• Manufacturer: ASHIKA

• Fitting Position: Front Axle
• Wear Warning Contact: with acoustic wear warning
• Supplementary Article/Supplementary Info: with accessories
• Brake System: ATE
• Width 1 [mm]: 160
• Width 2 [mm]: 178
• Height 1 [mm]: 63
• Height 2 [mm]: 62
• Thickness 1 [mm]: 17
• Thickness 2 [mm]: 18
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Width 2 [mm]: 160
• Height 1 [mm]: 62
• Height 2 [mm]: 63
• Thickness [mm]: 17.3
• Wear Warning Contact: with acoustic wear warning
• Brake System: Teves
• Fitting Position: Front Axle
• Width 1 [mm]: 178
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Fitting Position: Front Axle
• Thickness [mm]: 18.4
• Width [mm]: 62, 63
• Length [mm]: 178
• Length 1 [mm]: 160
• Brake System: ATE
• WVA Number: 23063, 23064, 23066, 23067
• Manufacturer: JAPKO

• Parameter: DP1010.10.0210
• Fitting Position: Rear Axle
• Thickness [mm]: 14.8
• Length [mm]: 95.6
• Height [mm]: 43
• Wear Warning Contact: incl. wear warning contact
• Brake System: Lucas
• Manufacturer: DRIVE

• Fitting Position: Rear Axle
• Number of pads: 4
• Thickness [mm]: 14.8
• Length [mm]: 95.5
• Height [mm]: 42.8
• Wear Warning Contact: with acoustic wear warning
• Supplementary Article/Supplementary Info: with accessories
• Brake Pad: With bevelled edges
• Brake System: TRW
• WVA Number: 23417, 23654, 23655
• Name: SK VKBP90032A
• Manufacturer: SKF

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) from: 22000001
• Width [mm]: 42
• Brake System: General Motors
• Supplementary Article/Info 2: with handbrake lever
• Inner brake drum diameter [mm]: 230
• Name: BR S 59 525
• Manufacturer: BREMBO

• Fitting Position: Front Axle
• Wear Warning Contact: with acoustic wear warning
• Brake System: ATE
• Width 1 [mm]: 155
• Width 2 [mm]: 156
• Height 1 [mm]: 72
• Height 2 [mm]: 79
• Thickness [mm]: 20
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Vehicle Identification Number (VIN) to: *********1*999999
• Length [mm]: 104.9
• Width [mm]: 42.7
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with brake caliper screws, with fastening material
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 16.5
• Wear Warning Contact: with acoustic wear warning
• Weight [kg]: 0.919
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Width 1 [mm]: 160
• Height 1 [mm]: 63
• Thickness 1 [mm]: 17.5
• Width 2 [mm]: 177.6
• Height 2 [mm]: 62
• Thickness 2 [mm]: 18.5
• Brake System: ATE
• Manufacturer: DENCKERMANN ZAWIESZENIE

Wear Warning Contact: without integrated wear warning contact, with acoustic wear warning

• Driven Units: Camshaft
• Article number of the recommended special tool: GAT4620
• Tensile Cord Material: Fiberglass
• Belt Material: HNBR (hydrogenated nitrile butadiene rubber)
• Colour: black
• Number of Teeth: 162
• Width [mm]: 20
• Tooth Pitch [mm]: 8
• Length [mm]: 1,296
• Observe technical data:
• Name: Hammasrihm
• Manufacturer: GAT

• Length [mm]: 160, 177.6
• Width [mm]: 63.1, 62.1
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 17, 18.3
• Wear Warning Contact: with acoustic wear warning
• Weight [kg]: 1.642
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Thickness [mm]: 14.7
• Width [mm]: 95.5
• Height [mm]: 42.5
• Wear Warning Contact: with acoustic wear warning
• Brake System: Trw
• Supplementary Article/Info 2: with brake caliper screws
• Manufacturer: OPTIMAL ZAWIESZENIE

• Vehicle Identification Number (VIN) to: *********1*999999
• Width [mm]: 42
• Outer Diameter [mm]: 230
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Weight [kg]: 2.06
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: *********1*999999
• Length [mm]: 104.9
• Width [mm]: 42.7
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with brake caliper screws, with fastening material
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 16.5
• Wear Warning Contact: with acoustic wear warning
• Weight [kg]: 0.919
• Name: SW 40 91 6445
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Width [mm]: 42
• Drum diameter [mm]: 230
• Brake System: GM
• Fitting Position: Rear Axle
• Manufacturer: JAPKO

• Fitting Position: Front Axle
• FMSI Code: D1532-8741
• Test Mark: E1 90R-01881/459
• WVA Number: 23066 23067 23063 23
• Brake System: Continental
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: with acoustic wear warning
• Width 1 [mm]: 178
• Width 2 [mm]: 160
• Height 1 [mm]: 62.1
• Height 2 [mm]: 62.8
• Thickness 1 [mm]: 16.7
• Thickness 2 [mm]: 16.7
• Manufacturer: DELPHI LOCKHEED HAMULCE

• Fitting Position: Rear Axle
• FMSI Code: D1932-8471
• Test Mark: E1 90R-01878/1003
• WVA Number: 23417
• Brake System: TRW
• Supplementary Article/Info 2: with adhesive film
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear indicator
• Width 1 [mm]: 95.3
• Width 2 [mm]: 95.3
• Height 1 [mm]: 42.8
• Height 2 [mm]: 42.8
• Thickness 1 [mm]: 15.2
• Thickness 2 [mm]: 15.2
• Manufacturer: DELPHI
• Name: DE LP1681

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) to: 18999999
• Width [mm]: 42
• Brake System: TRW
• Supplementary Article/Info 2: with handbrake lever
• Inner brake drum diameter [mm]: 230
• Name: BR S 59 517
• Manufacturer: BREMBO

• Width [mm]: 22
• Inner Diameter [mm]: 8
• Outer Diameter [mm]: 59
• for OE number: 55567191
• Supplementary Article/Info 2: with screw set
• Manufacturer: SASIC

• Fitting Position: Rear Axle
• Manufacturer Restriction: TRW
• Width [mm]: 95.4
• Height [mm]: 42.7
• Thickness [mm]: 15
• Wear Warning Contact: with acoustic wear warning
• Supplementary Article/Info 2: with brake caliper screws
• Supplementary Article/Supplementary Info: with accessories
• Test Mark: E9 90R - 01120/553
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Length [mm]: 160, 177.6
• Width [mm]: 63.1, 62.1
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 17, 18.3
• Wear Warning Contact: with acoustic wear warning
• Weight [kg]: 1.642
• Name: SW 40 91 6233
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• FMSI Code: D1141-8252
• Test Mark: E1 90R-01881/465
• WVA Number: 23057 23058 23059
• Brake System: Continental
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: with acoustic wear warning
• Width 1 [mm]: 155.5
• Width 2 [mm]: 156.3
• Height 1 [mm]: 71.6
• Height 2 [mm]: 78.5
• Thickness 1 [mm]: 19
• Thickness 2 [mm]: 19
• Name: DE LP1309
• Manufacturer: DELPHI

• Fitting Position: Rear Axle
• Width [mm]: 95.5
• Height [mm]: 42.8
• Thickness [mm]: 15.2
• Wear Warning Contact: with acoustic wear warning
• WVA Number: 23417
• Brake System: Lucas
• Packaging length [cm]: 12.5
• Packaging width [cm]: 8.1
• Packaging height [cm]: 8
• Weight [kg]: 0.831
• Manufacturer: MINTEX

• Fitting Position: Front Axle
• Width 1 [mm]: 177
• Width 2 [mm]: 160
• Height 1 [mm]: 62
• Height 2 [mm]: 63
• Thickness [mm]: 17.3
• Wear Warning Contact: with acoustic wear warning
• Brake System: Teves
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: QUARO

• Fitting Position: Rear Axle
• Width [mm]: 96
• Height [mm]: 42.7
• Thickness [mm]: 15.2
• Wear Warning Contact: with acoustic wear warning
• Brake System: Lucas
• Friction Lining Material: Ceramic
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: QUARO

• Fitting Position: Rear Axle
• Brakes-/Drive Dynamics Articles: for ABS
• Brake Disc Type: solid
• Manufacturer Restriction: TRW
• Wear Warning Contact: with acoustic wear warning
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 23417, 23654, 23655
• Test Mark: E20 90R-01134/001
• Length [mm]: 95.4
• Thickness [mm]: 15.2
• Height [mm]: 42.7
• Manufacturer: BRECK KLOCKI HAMULCOWE

• Fitting Position: Rear Axle
• Manufacturer Restriction: TRW
• Width [mm]: 42
• Inner brake drum diameter [mm]: 228
• Name: PIDURIKLOTSIDE KOMPLEKT
• Manufacturer: MAX

• Width [mm]: 24
• Number of Teeth: 146
• Surface: PTFE (Polytetrafluorethylene) coated
• Belts: with rounded tooth profile
• Weight [kg]: 0.22
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Width [mm]: 95.5
• Height [mm]: 42.5
• Thickness [mm]: 15.2
• Number of wear indicators [per axle]: 2
• Wear Warning Contact: with acoustic wear warning
• Brake System: TRW
• Supplementary Article/Supplementary Info: with accessories
• Supplementary Article/Info 2: with anti-squeak plate, with brake caliper screws
• Quality: PREMIUM
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

General Information: Different chamfers on the leading and trailing edges of the brake pads support the silent performance of MEYLE-PD. To ensure this silent performance, slotting and chamfer are individually designed for each brake pad.

• Fitting Position: Rear Axle
• FMSI Code: D1932-8471
• Test Mark: E1 90R-01878/1003
• WVA Number: 23417
• Brake System: TRW
• Supplementary Article/Info 2: with adhesive film
• Supplementary Article/Supplementary Info: with accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear indicator
• Width 1 [mm]: 95.3
• Width 2 [mm]: 95.3
• Height 1 [mm]: 42.8
• Height 2 [mm]: 42.8
• Thickness 1 [mm]: 15
• Thickness 2 [mm]: 15
• Manufacturer: DELPHI