• Filter type: Spin-on Filter
• for OE number: 116760469600
• Height [mm]: 155
• Fuel Type: Diesel
• Outer Diameter [mm]: 85
• Sealing Ring Diameter [mm]: 70
• Manufacturer: KAMOKA
• Lisainfo: F300301
• Additional information: F300301

• Fitting Position: Front Axle
• Brake System: ATE
• Height [mm]: 52.3
• Width [mm]: 156
• Thickness [mm]: 17.5
• Wear Warning Contact: prepared for wear warning indicator
• Lisainfo: Brake pad set, front, 17.6 mm
• Additional information: Brake pad set, front, 17.6 mm

• Filter type: Spin-on Filter, Filter Insert
• Manufacturer: DELLO AUTOMEGA

• Filter type: In-Line Filter
• Height [mm]: 140
• Outer Diameter [mm]: 55
• Outlet Ø [mm]: 8
• Inlet Ø [mm]: 8
• Manufacturer: SCT MANNOL

• Filter type: In-Line Filter
• Outer Diameter [mm]: 55
• Height [mm]: 140
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Filter type: In-Line Filter
• Height [mm]: 140
• Outer Diameter [mm]: 59.5
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Name: KšTUSEFILTER
• Manufacturer: ALC

• Filter type: In-Line Filter
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• for OE number: 119113204500
• Height [mm]: 140
• Fuel Type: Petrol
• Outer Diameter [mm]: 56
• Manufacturer: KAMOKA

• Filter type: In-Line Filter
• Height [mm]: 138
• Outer Diameter [mm]: 55
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Name: KšTUSEFILTER
• Manufacturer: MAX

• Diameter [mm]: 58.8
• Filter type: In-Line Filter
• Height [mm]: 139
• Housing material: Metal
• Name: KšTUSEFILTER
• Manufacturer: MEY

• Outer Diameter 1 [mm]: 64.5
• Length [mm]: 56.5
• Width [mm]: 64.5
• Height [mm]: 125
• Outer Diameter [mm]: 56.5
• Filter type: Spin-on Filter
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Manufacturer: ACKOJA

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Filter type: In-Line Filter
• Height [mm]: 131
• Outer Diameter [mm]: 62
• Outer Diameter 1 [mm]: 56
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Manufacturer: VALEO
• Name: VA 587003

• Height [mm]: 140
• Outer Diameter [mm]: 59
• Packing Type: Box
• Filter type: In-Line Filter
• Inlet Ø [mm]: 9.3
• Outlet Ø [mm]: 8
• Packaging length [cm]: 6.4
• Packaging width [cm]: 6.4
• Packaging height [cm]: 17.8
• Name: CH CFF100201
• Manufacturer: CHAMPION

• Filter type: Spin-on Filter
• Height [mm]: 140
• Outer Diameter [mm]: 56
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Lisainfo: Fuel filter
• Additional information: Fuel filter

• Filter type: In-Line Filter
• Height [mm]: 138
• Outer Diameter 1 [mm]: 55
• Outer Diameter 2 [mm]: 59
• Inner Diameter 1 [mm]: 8
• Inner Diameter 2 [mm]: 8
• Manufacturer: DENCKERMANN FILTRY

• Filter type: In-Line Filter
• Height [mm]: 138
• Outer Diameter [mm]: 60
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Filter type: Filter Insert
• Diameter [mm]: 60
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Height [mm]: 160
• for OE number: 156789
• Manufacturer: MEAT & DORIA

• Diameter [mm]: 55
• Material: Plastic
• Filter type: In-Line Filter
• Height [mm]: 139
• Manufacturer: DELPHI
• Name: DE EFP214

• Filter type: In-Line Filter
• Outer Diameter 1 [mm]: 56
• Outlet Ø [mm]: 8
• Thread Size: 8 mm
• Height [mm]: 138
• Housing material: Aluminium
• Manufacturer: KOLBENSCHMIDT

• Fitting Position: Rear Axle
• Width [mm]: 61.7
• Thickness [mm]: 15
• Height [mm]: 57.5
• Brake System: ATE
• Manufacturer: DENCKERMANN ZAWIESZENIE

Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact

• Filter type: Spin-on Filter
• for OE number: 13 32 2 245 006
• Height [mm]: 185
• Fuel Type: Diesel
• Outer Diameter [mm]: 85
• Sealing Ring Diameter [mm]: 70
• Manufacturer: KAMOKA

• Filter type: In-Line Filter
• Height [mm]: 139
• Outer Diameter [mm]: 55
• Diameter 3 [mm]: 8
• Diameter 4 [mm]: 8
• Name: Fuel filter
• Quality class: Q

Lisainfo: "Tootja: COOPERSFIAAM FILTERS
CORSA A HATCHBACK (9
(kvaliteediklass: PJ)" Additional information: "Tootja: COOPERSFIAAM FILTERS
CORSA A HATCHBACK (9
(kvaliteediklass: PJ)"

• Filter type: In-Line Filter
• Height [mm]: 139
• Outer Diameter [mm]: 55
• Diameter 3 [mm]: 8
• Diameter 4 [mm]: 8
• Manufacturer: PURFLUX

• Fuel Mixture Formation: Petrol Injection
• Filter type: In-Line Filter
• Diameter [mm]: 55
• Outer Diameter 1 [mm]: 63
• Height [mm]: 144
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Name: KšTUSEFILTER
• Manufacturer: BOS

• Filter type: Spin-on Filter
• Height [mm]: 139
• Inner Diameter [mm]: 8
• Outer Diameter [mm]: 55
• Quality class: PJ
• Name: Fuel filter

• Filter type: In-Line Filter
• Outer Diameter [mm]: 54.5
• Height [mm]: 139.5
• Manufacturer: HENGST FILTER

• Filter type: In-Line Filter
• Diameter [mm]: 55
• Height [mm]: 140
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Net Weight [g]: 101
• Packaging height [cm]: 14.6
• Packaging length [cm]: 5.6
• Packaging width [cm]: 5.6
• Name: KN KL14
• Manufacturer: KNECHT

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Brake System: ATE
• Width [mm]: 61.7
• Thickness [mm]: 15.5
• Height [mm]: 57.5
• Manufacturer: LPR

• Filter type: In-Line Filter
• Diameter [mm]: 55
• Height [mm]: 140
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Net Weight [g]: 101
• Packaging height [cm]: 14.6
• Packaging width [cm]: 5.6
• Packaging length [cm]: 5.6
• Manufacturer: MAHLE

• Filter type: In-Line Filter
• Height [mm]: 138
• Outer Diameter [mm]: 55
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• SVHC: No SVHC present!
• Name: KšTUSEFILTER
• Manufacturer: MAN

• Fitting Position: Rear Axle
• Diameter [mm]: 160
• Width [mm]: 25
• Brake System: TEVES
• Manufacturer: DENCKERMANN ZAWIESZENIE

• WVA Number: 21140
• Fitting Position: Rear Axle
• Manufacturer: ASHIKA-KLOCKI

• Filter type: In-Line Filter
• Height [mm]: 138
• Outer Diameter [mm]: 60
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Manufacturer: PROFIPOWER

• Fitting Position: Rear Axle
• Width [mm]: 61.7
• Height [mm]: 57.5
• Thickness [mm]: 15.7
• Wear Warning Contact: excl. wear warning contact
• Brake System: ATE
• Supplementary Article/Info 2: with anti-squeak plate
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• FMSI Code: D427-7316
• Test Mark: E1 90R-011094/467
• Brake System: Continental
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• WVA Number: 21140
• Friction Lining Material: Organic
• Wear Warning Contact: not prepared for wear warning indicator
• Width 1 [mm]: 61.8
• Width 2 [mm]: 61.6
• Height 1 [mm]: 57.6
• Height 2 [mm]: 57.6
• Thickness 1 [mm]: 15.5
• Thickness 2 [mm]: 15.5
• Name: DE LP586
• Manufacturer: DELPHI

• Diameter [mm]: 59
• Width [mm]: 26
• Tensioner Pulley Actuation: Automatic
• Name: SEADE-/JUHTRULL,HAMMASRIHM
• Manufacturer: MAX

• Quantity per packing unit: 4
• Fitting Position: Rear Axle
• Thickness [mm]: 15.5
• Width [mm]: 61.7
• Height [mm]: 57.5
• Brake System: ATE
• Weight [kg]: 0.57
• Manufacturer: TOMEX BRAKES

• Fitting Position: Rear Axle
• Brake System: TEVES
• Width [mm]: 62
• Height [mm]: 57.6
• Thickness [mm]: 15
• WVA Number: 21140
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• Manufacturer: VALEO

• Engine Number to: 14142838
• Number of Teeth: 141
• Length [mm]: 1,343
• Width [mm]: 24
• Tooth Pitch [mm]: 9.525
• Manufacturer: BOSCH

• Fitting Position: Rear Axle
• Width [mm]: 25
• Brake System: Ate/Teves
• Inner brake drum diameter [mm]: 160
• Weight [kg]: 0.88
• Manufacturer: TOMEX BRAKES

• Article number of recommended accessories: 98012600
• Fitting Position: Front Axle
• Height [mm]: 52.4
• Thickness [mm]: 18.3
• Wear Warning Contact: prepared for wear warning indicator
• Brake System: Teves
• Width [mm]: 157
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Engine Number from: 14002935
• Outer Diameter [mm]: 59
• Width [mm]: 26
• Lisainfo: Tension pulley for timing belt
• Additional information: Tension pulley for timing belt

• Length [mm]: 61.7
• Width [mm]: 57.5
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 15.5
• Wear Warning Contact: excl. wear warning contact
• Weight [kg]: 0.741
• Observe service information:
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Brake Disc Type: solid
• Manufacturer Restriction: ATE
• Wear Warning Contact: not prepared for wear warning indicator
• WVA Number: 21140
• Test Mark: E1 90R-01814/128
• Width [mm]: 61.7
• Thickness [mm]: 15.8
• Height [mm]: 57.5
• Manufacturer: BRECK KLOCKI HAMULCOWE

• Brake System: Ate
• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Test Mark: ECE-R90
• Height 1 [mm]: 57.7
• Wear Warning Contact: excl. wear warning contact
• Vibration: with vibration damper
• Width 1 [mm]: 61.7
• Thickness 1 [mm]: 15.5
• Manufacturer: METELLI UKL.HAMULCOWY

• Fitting Position: Rear Axle
• Width [mm]: 61.7
• Height [mm]: 57.5
• Thickness [mm]: 15
• Brake System: ATE
• ABE No.: KBA 60401
• MAPP code available:
• Article number of recommended accessories: 13.0460-0217.2
• Observe dimensions:
• Manufacturer: ATE

Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact

• Vehicle Identification Number (VIN) from: T1......
• Block Separation:
• Engine Number from: 14142839
• Vehicle Identification Number (VIN) to: S9......
• Number of Teeth: 176
• Length [mm]: 1,408
• Width [mm]: 24
• Tooth Pitch [mm]: 8
• Manufacturer: BOSCH

• Fitting Position: Front Axle
• Brake System: TEVES
• Width [mm]: 156
• Height [mm]: 52.4
• Thickness [mm]: 17.5
• WVA Number: 21201
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 1.2
• Manufacturer: VALEO
• Name: VA 301184

• Fitting Position: Rear Axle
• Article number of recommended accessories: 1987474014, 1987474928, 1987474277, 1987474192
• Observe technical data:
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 21140
• Thickness [mm]: 15
• Width [mm]: 61.7
• Height [mm]: 57.5
• Brake System: ATE
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: BOS

• Width [mm]: 156.5
• Height [mm]: 52.4
• Thickness [mm]: 18.3
• Wear Warning Contact: prepared for wear warning indicator
• WVA Number: 21862, 21190
• Fitting Position: Front Axle
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: JPA

• Engine Number from: 14142839
• Width [mm]: 26
• Outer Diameter [mm]: 59
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: ATE
• Wear Warning Contact: not prepared for wear warning indicator
• Test Mark: E1 90R 01025/012
• Height [mm]: 57.5
• Width [mm]: 61.7
• Thickness [mm]: 15.5
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Driven Units: Camshaft
• Vehicle configuration line / variant: >14142838
• Number of Teeth: 141
• Width [mm]: 24
• Name: HAMMASRIHM
• Manufacturer: DAY

• Length [mm]: 156.5
• Width [mm]: 52.6
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with piston clip
• Fitting Position: Front Axle
• Thickness 1 [mm]: 17
• Wear Warning Contact: prepared for wear warning indicator
• Weight [kg]: 1.38
• Observe service information:
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Width [mm]: 156.5
• Height [mm]: 52.4
• Thickness [mm]: 18.3
• Wear Warning Contact: prepared for wear warning indicator
• WVA Number: 21862, 21190
• Fitting Position: Front Axle
• Manufacturer: ASHIKA-KLOCKI

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• FMSI Code: D796-7666
• Test Mark: E1 90R-01881/1032
• Brake System: Continental
• Supplementary Article/Info 2: without anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• WVA Number: 21201, 21190
• Friction Lining Material: Semi-Metallic
• Wear Warning Contact: prepared for wear warning indicator
• Width 1 [mm]: 156.4
• Width 2 [mm]: 156.3
• Height 1 [mm]: 52.5
• Height 2 [mm]: 52.5
• Thickness 1 [mm]: 17
• Thickness 2 [mm]: 17
• Manufacturer: DELPHI

• Fitting Position: Front Axle
• Width [mm]: 156.3
• Height [mm]: 52.2
• Thickness [mm]: 17.6
• Wear Warning Contact: prepared for wear warning indicator
• Brake System: ATE
• Supplementary Article/Info 2: with anti-squeak plate
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• FMSI Code: D796-7666
• Test Mark: E1 90R-01881/1032
• Brake System: Continental
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• WVA Number: 21201, 21190
• Friction Lining Material: Semi-Metallic
• Wear Warning Contact: prepared for wear warning indicator
• Width 1 [mm]: 156.7
• Width 2 [mm]: 156.3
• Height 1 [mm]: 52.5
• Height 2 [mm]: 52.5
• Thickness 1 [mm]: 17
• Thickness 2 [mm]: 17
• Manufacturer: DELPHI
• Name: DE LP1605

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Brake System: ATE
• Width [mm]: 156.4
• Article number of recommended accessories: KS0099, KS0083, KS0085
• Height [mm]: 52.8
• Thickness [mm]: 17.3
• Manufacturer: LPR

• Driven Units: Camshaft
• Vehicle configuration line / variant: 14142839>
• Number of Teeth: 176
• Width [mm]: 24
• Name: HAMMASRIHM
• Manufacturer: DAY

• Brake System: Ate
• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Test Mark: ECE-R90
• Height 1 [mm]: 52.6
• Wear Warning Contact: prepared for wear warning indicator
• Vibration: without vibration damper
• Width 1 [mm]: 156.4
• Thickness 1 [mm]: 18
• Manufacturer: METELLI UKL.HAMULCOWY

• Driven Units: Camshaft
• Engine Number to: (14/25)142838
• Number of Teeth: 141
• Packaging length [cm]: 25.5
• Packaging width [cm]: 16
• Packaging height [cm]: 3
• Weight [kg]: 0.215
• Width [mm]: 24
• Tooth Pitch [mm]: 9.525
• Name: HAMMASRIHM
• Manufacturer: CON

• Length [mm]: 156.5
• Width [mm]: 52.6
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with piston clip
• Fitting Position: Front Axle
• Thickness 1 [mm]: 17
• Wear Warning Contact: prepared for wear warning indicator
• Weight [kg]: 1.38
• Name: SW 40 91 6030
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Number from: 14142839
• Width [mm]: 26
• Outer Diameter [mm]: 59
• Height [mm]: 33.5
• Manufacturer: OPTIMAL

• Fitting Position: Front Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Width 1 [mm]: 156.4
• Height 1 [mm]: 52.8
• Thickness 1 [mm]: 17
• Brake System: ATE
• Wear Warning Contact: prepared for wear warning indicator
• Weight [kg]: 1.54
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle
• Width [mm]: 61.8
• Height [mm]: 57.5
• Thickness [mm]: 15.7
• Wear Warning Contact: not prepared for wear warning indicator
• WVA Number: 21140
• Brake System: Teves
• Article number of recommended accessories: 82025700
• Packaging length [cm]: 9.5
• Packaging width [cm]: 8.2
• Packaging height [cm]: 7.3
• Weight [kg]: 0.65
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TEX

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Width [mm]: 62
• Thickness [mm]: 16
• Height [mm]: 58
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Teves
• WVA Number: 21140
• Manufacturer: BREMBO
• Name: BR P 59 018

• Fitting Position: Front Axle
• Article number of recommended accessories: 98012600
• Width [mm]: 157
• Height [mm]: 52.4
• Thickness [mm]: 18.3
• Wear Warning Contact: prepared for wear warning indicator
• Brake System: Teves
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: QUARO

• Driven Units: Camshaft
• Engine Number from: 14142839
• Article number of the recommended special tool: GAT4620
• Tensile Cord Material: Fiberglass
• Belt Material: HNBR (hydrogenated nitrile butadiene rubber)
• Colour: black
• Number of Teeth: 176
• Width [mm]: 24
• Tooth Pitch [mm]: 8
• Length [mm]: 1,408
• Observe technical data:
• Name: Hammasrihm
• Manufacturer: GAT

• Driven Units: Camshaft
• Engine Number from: (14/25)142839
• Number of Teeth: 176
• Packaging length [cm]: 25.5
• Packaging width [cm]: 16
• Packaging height [cm]: 3
• Weight [kg]: 0.212
• Width [mm]: 24
• Tooth Pitch [mm]: 8
• Name: HAMMASRIHM
• Manufacturer: CON

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Brake System: ATE-TEVES
• Width [mm]: 62
• Height [mm]: 58
• Thickness [mm]: 16
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Quantity per packing unit: 4
• Fitting Position: Front Axle
• Width [mm]: 156.4
• Height [mm]: 52.8
• Wear Warning Contact: prepared for wear warning indicator
• Brake System: ATE
• Thickness 1 [mm]: 18.1
• Thickness 2 [mm]: 17.3
• Weight [kg]: 1.98
• Manufacturer: TOMEX BRAKES

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with piston clip, with anti-squeak plate
• Observe technical data:
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 21190
• Thickness [mm]: 18.3
• Width [mm]: 156.6
• Height [mm]: 52.4
• Brake System: ATE
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: BOS

Article number of recommended accessories: 1987474126, 1987474972, 1987474179, 1987474210, 1987474241, 1987474393, 1987474578, 1987474580, 1987474586, 1987474604, 1987474907, 1987474908, 1987474909, 1987474923, 1987474928, 1987474929, 1987474930, 1987474936, 1987474173

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: ATE
• Wear Warning Contact: prepared for wear warning indicator
• Test Mark: E1 90R 01024/084
• Height [mm]: 52.8
• Width [mm]: 156.4
• Thickness [mm]: 18.1
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW
• Additional information: GDB1300
• Lisainfo: GDB1300

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Manufacturer Restriction: ATE
• Wear Warning Contact: prepared for wear warning indicator
• WVA Number: 21190, 21201
• Test Mark: E1 90R-01811/045
• Width [mm]: 156.3
• Thickness [mm]: 17.5, 16.7
• Height [mm]: 52.5
• Manufacturer: BRECK KLOCKI HAMULCOWE

• Engine Number from: 14142839
• Outer Diameter [mm]: 59
• Width [mm]: 26
• Observe service information:
• Follow installation instructions:
• SVHC: No SVHC present!
• Name: PINGUTUSRULL,HAMMASRIHM
• Manufacturer: INA

• Fitting Position: Front Axle
• Article number of recommended accessories: 98012600, 82028900
• Width [mm]: 156.5
• Height [mm]: 52.4
• Thickness [mm]: 18.3
• Wear Warning Contact: prepared for wear warning indicator
• WVA Number: 21862
• Brake System: Teves
• Packaging length [cm]: 17
• Packaging width [cm]: 12
• Packaging height [cm]: 8.3
• Weight [kg]: 1.45
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TEX
• Quality class: Q

• Fitting Position: Front Axle
• Brakes-/Drive Dynamics Articles: for ABS
• Wear Warning Contact: prepared for wear warning indicator
• Height 1 [mm]: 52.8
• Brake System: ATE
• Width 1 [mm]: 156.4
• Thickness 1 [mm]: 17
• Manufacturer: PROFIPOWER

• Width 1 [mm]: 26
• Outer Diameter 1 [mm]: 59
• Manufacturer: SNR /NTN-SNR/

• Vehicle configuration line / variant: 14142839>
• Belt Pulley Ø [mm]: 59
• Height 1 [mm]: 26
• Height 2 [mm]: 27.5
• Weight [kg]: 0.4
• Name: DA ATB2204
• Manufacturer: DAYCO

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Width [mm]: 156
• Thickness [mm]: 18
• Height [mm]: 53
• Wear Warning Contact: prepared for wear warning indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Teves
• Supplementary Article/Info 2: with piston clip
• WVA Number: 21190, 21862
• Manufacturer: BREMBO
• Name: BR P 59 017

• Fitting Position: Front Axle
• Width [mm]: 156.3
• Height [mm]: 52.3
• Thickness [mm]: 17.5
• Brake System: ATE
• Test Mark: E9 90R-02A1251/4454
• MAPP code available:
• Observe dimensions:
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: ATE

Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact Article number of recommended accessories: 24.8190-0705.2, 24.8190-0706.2, 24.8190-0708.2, 24.8190-0715.2, 24.8190-0947.2

• Engine Number from: 14 142839
• Diameter [mm]: 59
• Width [mm]: 26
• Tensioner Pulley Actuation: Automatic
• Name: PINGUTUSRULL,HAMMASRIHM
• Manufacturer: SKF