• Number of pins: 2
• Colour Coding: black
• Manufacturer: JP GROUP
• Lisainfo: Temperature sensor for cooling system, 2 pins
• Additional information: Temperature sensor for cooling system, 2 pins

• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Colour: black
• Manufacturer: JP GROUP
• Lisainfo: Sender for outer temperature
• Additional information: Sender for outer temperature

• Number of pins: 2
• Housing Colour: light blue
• Connector Shape: oval
• Manufacturer: JP GROUP
• Lisainfo: Sender Unit, coolant temperature
• Additional information: Sender Unit, coolant temperature

Fabrication Number: ECT-CH-006

• Number of pins: 2
• Connector Shape: oval
• Fabrication Number: ECT-PL-000
• Manufacturer: NTY
• Name: NTY ECT-PL-000

• Vehicle Equipment: for vehicles with check control system
• Number of pins: 2
• Connector Shape: oval
• Colour: black
• Material: Plastic
• for OE number: 90346055
• Manufacturer: DELLO AUTOMEGA

• Connector Shape: oval
• Sensor Type: NTC Sensor
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Number of pins: 2
• Colour Coding: blue
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear
• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: oval
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 46462179
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Fitting Position: Front
• Connector Shape: round
• Material: Plastic
• Number of pins: 1
• Plug Type: Male
• Sensor Type: NTC Sensor
• Spanner Size: S13
• Thread Size: NPTF1/8

• Fitting Position: Front, Rear
• Quantity: 2
• Thread Size: M12x1.5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Fitting Position: Rear
• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S19
• Thread Size: M12*1,5
• Name: NI 207019
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Thread Size: M12x1.5
• Spanner Size: 19
• Corresponds to the original part in colour: green, black, grey, white
• Manufacturer: FAST

• for OE number: 12 38 938
• Length [mm]: 69
• Supplementary Article/Info 2: with seal ring
• Fabrication Number: ECP-PL-009

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Component Number: 120-04-079
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Vehicle Identification Number (VIN) to: 2B999999
• Housing Colour: blue
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: DLP

• Fitting Position: Rear
• Outer Diameter [mm]: 7.4
• Resistor [Ohm]: 2,080, 294
• Supplementary Article/Supplementary Info: with seal
• External Thread [mm]: 12
• Thread Pitch [mm]: 1.5
• Temperature range [°C]: 25, 80
• Mounting Type: Bolted
• Colour: blue
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Number of pins: 2
• Corresponds to the original part in colour: black, white, light blue
• not for trim level: 4mm
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Sensor Type: Passive sensor
• for OE number: 10456604
• Manufacturer: KAMOKA

• Fitting Position: Rear
• Number of pins: 2
• Thread Size: M12x1,5
• Supplementary Article/Info 2: with seal ring
• Housing Colour: black
• Weight [kg]: 0.032
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M12 x 1,5
• Number of pins: 2
• Manufacturer: ERA

• Engine Code: Z 16 XEP
• Fitting Position: Front
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: white, green, black
• for article number: 1.880.170, 1.880.190
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Number of pins: 2
• Connector Shape: oval
• Colour: black
• Mounting Type: Pressed
• Height [mm]: 25.5
• Width [mm]: 29
• for OE number: 1236284, 9152245
• Manufacturer: MEAT&DORIA

• Vehicle Equipment: for vehicles with check control system
• Number of pins: 2
• Lisainfo: Water level sensor for washertank
• Additional information: Water level sensor for washertank

• Engine Code: Z 16 XEP
• Fitting Position: Rear, Front
• Block Separation:
• Sensor Type: NTC Sensor
• Thread Size: M12 x 1,5
• Spanner Size: 19
• Supplementary Article/Info 2: with seal ring
• Colour: grey
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Length [mm]: 69
• Number of connectors: 2
• Lisainfo: Sensor, crankshaft pulse
• Additional information: Sensor, crankshaft pulse

• Number of pins: 2
• Name: ANDUR, VŽNTVOLL
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
COMBO TOUR, 10.01-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
COMBO TOUR, 10.01-
(kvaliteediklass: PJ)"

• Height [mm]: 39
• Resistor [Ohm]: 2,300
• Number of connectors: 2
• Manufacturer: VERNET

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Engine Code: Z 16 XEP
• Sensor Type: Passive sensor
• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Voltage [V]: 12
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MAX

• Voltage [V]: 12
• Temperature range to [°C]: 250
• Resistor [Ohm]: 5,000
• Number of pins: 2
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Connector Shape: oval
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009104011

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Connector Shape: oval
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Supplementary Article/Info 2: with service lamp
• Weight [kg]: 0.016
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MEY

• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Manufacturer: BREMI

• Number of pins: 2
• Sensor Type: Inductive Sensor
• Resistor [kOhm]: 2.3
• Supplementary Article/Info 2: without cable
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Length [mm]: 87
• Number of connectors: 2
• Colour: black, white
• Weight [kg]: 0.02
• Name: ANDUR,PESUVEETASE
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Weight [kg]: 0.06
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 17SKV233

• Construction Year from: 10.2006
• Number of pins: 2

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Resistor [Ohm]: 2,700
• Number of pins: 2
• Sensor Type: Inductive Sensor, Passive sensor
• Number of connectors: 2
• Connector Shape: oval
• Supplementary Article/Info 2: with seal ring, for crankshaft, without cable
• Required quantity: 1
• Operating Mode: Electric
• Socket colour: black
• Supplementary Article/Supplementary Info: with seal
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 39.3
• Number of mounting bores: 1
• Weight [kg]: 0.044
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Colour: black
• Alternatively:
• Number of pins: 2
• Weight [kg]: 0.03
• Alternative Repair Kit: 550052
• Fitting Depth [mm]: 39
• Resistor [kOhm]: 2.4
• Manufacturer: ERA

• Construction Year from: 01.2006
• Sensor Type: Inductive Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: with cable
• Resistor [Ohm]: 550
• Weight [kg]: 0.1
• Name: ANDUR, VŽNTVOLL
• Manufacturer: VAL

• Length [mm]: 69
• Number of connectors: 2
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: Z 16 XEP
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Length [mm]: 69
• Number of connectors: 2
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Name: SW 40 92 2374
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of mounting bores: 1
• Voltage [V]: 12
• Resistor [Ohm]: 2,700
• Sensor Type: Inductive Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA
• Name: HE 6PU009163031

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Colour: black
• Number of pins: 2
• Weight [kg]: 0.03
• Fitting Depth [mm]: 39
• Resistor [kOhm]: 2.4
• Manufacturer: ERA

• Engine Code: Z 16 XEP
• Number of pins: 3
• Fitting Depth [mm]: 73
• Manufacturer: ERA

• Number of pins: 2
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Material: Plastic
• Cable Length [mm]: 170
• Fabrication Number: EPO-PL-002
• Manufacturer: NTY
• Name: NTY EPO-PL-002

• Voltage [V]: 12
• Number of pins: 2
• Weight [kg]: 0.08
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 17SKV406
• Manufacturer: ESEN SKV

• Warranty: 5 years warranty
• Manufacturer: HUCO

• Construction Year from: 01.2006
• Engine Code: Z16XEP
• Supplementary Article/Info 2: for camshaft, without cable
• Required quantity: 1
• Sensor Type: Hall Sensor
• Number of pins: 3
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 8.3
• Connector Shape: oval
• Resistor [kOhm]: 13.4
• Weight [kg]: 0.019
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Cable Length [mm]: 170
• Number of pins: 2
• Weight [kg]: 0.05
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 2
• Connector Shape: oval
• Cable Length [mm]: 170
• Number of mounting bores: 2
• for OE number: 55353335
• Name: Andur,Mootoriolitase
• Manufacturer: MD