Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Rear Axle both sides,
Lower, Rear, inner - Required quantity: 2
- Control/Trailing Arm Type: for control arm
-
Supplementary Article/Info 2: with protect screen,
with nut - Quality/ Grade: 10.9
- Thread Length [mm]: 62
- Screw length below head [mm]: 100
- Spanner Size: 20
- Outer Diameter [mm]: 30
- Thread Size: M12x1.5
-
Surface: Zinc-
coated -
Name: Kruvi,
ootshoob - Manufacturer: TED
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Lower - Material: Sheet Steel
- Supplementary Article/Info 2: with rubber sleeves
- Inner Diameter 1 [mm]: 12
- Inner Diameter 2 [mm]: 14
- Manufacturer: MERTZ
- Control/Trailing Arm Type: Control Arm
-
Fabrication Number: ZWT-
PL- 004 - Manufacturer: NTY
Fitting Position: Lower, Rear Axle, outer, Left, Right, Front, Rear Axle Left, Rear Axle Right
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Control/Trailing Arm Type: Trailing Arm
- Quantity Unit: Set
-
Fitting Position: Lower,
Front, Rear Axle Left, Rear Axle Right - Length from [mm]: 228
- Rod/Strut: Push Rod
- Quality class: PJ
- Name: Control arm left=right
Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"
-
Fitting Position: Rear Axle,
Lower - Length [mm]: 228
- Control/Trailing Arm Type: Control Arm
- Manufacturer: DENCKERMANN ZAWIESZENIE
-
Control/Trailing Arm Type: Semi-
Trailing Arm -
Fabrication Number: ZWT-
PL- 001 - Manufacturer: NTY
-
Name: NTY ZWT-
PL- 001
Fitting Position: Upper, Rear Axle, outer, Left, Right, Rear Axle Left, Rear Axle Right
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Rear Axle,
Lower - Inner Diameter 1 [mm]: 12
- Inner Diameter 2 [mm]: 14
-
Name: OOTSHOOB,
KNDMIK - Manufacturer: MAX
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Upper - Material: Sheet Steel
- Supplementary Article/Info 2: with bearing
- Manufacturer: MERTZ
- Control/Trailing Arm Type: Control Arm
- Base body material: Steel
- Fitting Position: Rear Axle
- Net weight [kg]: 0.9
- Length [mm]: 229
- Diameter 1 [mm]: 12
- Diameter 2 [mm]: 14
- Supplementary Article/Info 2: without ball joint
-
Name: OMG G41.2515/
S - Manufacturer: OMG
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Lower - Required quantity: 2
- Control/Trailing Arm Type: Control Arm
- Manufacturer: FAI
- Additional information: SS5559 FAI
- Lisainfo: SS5559 FAI
-
Fitting Position: Rear Axle,
Upper - Control/Trailing Arm Type: Control Arm
- Net weight [kg]: 2.02
-
Name: Roolimine -
Kndmik OPEL T. VECTRA C LE/ PR - Manufacturer: NK
- Control/Trailing Arm Type: Trailing Arm
- Quantity Unit: Set
-
Fitting Position: Upper,
Rear Axle Left, Rear Axle Right - Length from [mm]: 380
- Rod/Strut: Push Rod
- Name: Control arm left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
OPEL VECTRA C, 02-
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
OPEL VECTRA C, 02-
(kvaliteediklass: PJ)"
-
Inner Diameter [mm]: 12,
14 - Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Rear Axle Left,
Lower, Rear Axle Right - Weight [kg]: 0.85
- Supplementary Article/Info 2: with bearing
-
Name: OOTSHOOB,
KNDMIK - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Rear Axle,
both sides - Material: Steel
- Manufacturer: FAST
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Rear Axle Left,
Lower, Rear Axle Right - Inner Diameter 1 [mm]: 12
- Weight [kg]: 1.17
- Inner Diameter 2 [mm]: 14
- Supplementary Article/Supplementary Info: with attachment material
- Supplementary Article/Info 2: with bearing
-
Name: OOTSHOOB,
KNDMIK - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle,
outer, Lower, Front -
Thread Size 2: Bush Ø14,
2 mm - Material: Sheet Steel
- Control/Trailing Arm Type: Trailing Arm
- Supplementary Article/Info 2: without ball joint
- Length [mm]: 284
- Width [mm]: 47
- Height [mm]: 47
- Manufacturer: DELPHI
- Name: DE TC3336
-
Inner Diameter [mm]: 12,
14 - Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Rear Axle Left,
Lower, Rear Axle Right - Weight [kg]: 0.85
- Supplementary Article/Info 2: with bearing
- Manufacturer: SWAG
- Name: SW 40 93 4940
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Upper,
Rear Axle Right, Rear Axle Left - Material: Sheet Steel
- Supplementary Article/Info 2: with rubber mount
-
Surface: Cathodic Painting,
Black- painted - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Control/Trailing Arm Type: Control Arm
- Length 2 [mm]: 380
-
Fitting Position: Rear Axle both sides,
Upper - Manufacturer: ASHIKA
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Rear Axle Left,
Lower, Rear Axle Right - Inner Diameter 1 [mm]: 12
- Inner Diameter 2 [mm]: 14
- Weight [kg]: 1.17
- Supplementary Article/Info 2: with bearing
- Supplementary Article/Supplementary Info: with attachment material
- Manufacturer: SWAG
- Name: SW 40 93 6112
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Upper - Control/Trailing Arm Type: Control Arm
- Lisainfo: Track Control Arm
- Additional information: Track Control Arm
- Control/Trailing Arm Type: Control Arm
- Material: Sheet Steel
-
Fitting Position: Rear Axle,
Upper, both sides -
Name: Roolimine -
Kndmik OPEL T. VECTRA C LE/ PR - Manufacturer: MAX
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Rear Axle,
both sides, Front, Lower - Material: Sheet Steel
-
Name: Ootshoob,
kndmik - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Rear Axle,
Upper, Rear, outer - Article number of recommended accessories: 8500 10403
- Control/Trailing Arm Type: Control Arm
- Supplementary Article/Info 2: with rubber mount
- Required quantity: 2
-
Name: Ootshoob,
kndmik - Manufacturer: TRI
-
Lisainfo: FIAT,
OPEL, SAAB -
Additional information: FIAT,
OPEL, SAAB
Technical Information: "See accessories list for bolt kit, bolts are not included"
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Rear Axle Lower,
both sides - Material: Steel
- Manufacturer: FAST
- Control/Trailing Arm Type: Control Arm
- Length 2 [mm]: 380
-
Fitting Position: Rear Axle both sides,
Upper -
Name: Ootshoob,
kndmik - Manufacturer: JPA
- Control/Trailing Arm Type: Control Arm
- Base body material: Steel
- Fitting Position: Rear Axle
-
Net weight [kg]: 1,
808 - Length [mm]: 380
- Diameter 1 [mm]: 12
- Diameter 2 [mm]: 14
- Supplementary Article/Info 2: with ball joint
-
Name: OMG G41.4572/
C - Manufacturer: OMG
-
Fitting Position: Rear Axle both sides,
Upper - Required quantity: 2
- Control/Trailing Arm Design: Triangular Control Arm
- paired article number: VKDS 425000
- Hole Pitch 1/ Hole Pitch 2: 380
- Control/Trailing Arm Type: Control Arm
- Supplementary Article/Info 2: without ball joint
- Name: SK VKDS425000
- Manufacturer: SKF
- Fitting Position: Rear Axle
- Control/Trailing Arm Type: Control Arm
- Length [mm]: 440
- Manufacturer: MAGNETI MARELLI
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Name: COC 49398787
- Manufacturer: CORTECO
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Rear Axle,
Upper - Length [mm]: 379
- Inner Diameter [mm]: 14
- Name: ALT 83254AL
- Manufacturer: ALTE AUTOMOTIVE
-
Fitting Position: Rear Axle,
Upper - Material: Sheet Steel
- Control/Trailing Arm Type: Trailing Arm
- Supplementary Article/Info 2: without ball joint
- Length [mm]: 440
- Width [mm]: 130
- Height [mm]: 55
- Manufacturer: DELPHI
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Rear Axle Left,
Upper, Rear Axle Right - Weight [kg]: 1.86
- Supplementary Article/Info 2: with bearing
-
Name: Roolimine -
Kndmik OPEL T. VECTRA C LE/ PR - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Rear Axle Left,
Upper, Rear Axle Right - Weight [kg]: 2.203
- Supplementary Article/Supplementary Info: with attachment material
-
Name: Ootshoob,
kndmik - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Control/Trailing Arm Type: Triangular Control Arm
(CV) -
Fitting Position: Rear Axle,
Rear, Upper - for OE number: 423035
- Manufacturer: SASIC
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Rear Axle,
Lower - Length [mm]: 228
- Inner Diameter [mm]: 14
- Name: ALT 91771AL
- Manufacturer: ALTE AUTOMOTIVE
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Control/Trailing Arm Type: Control Arm
- Supplementary Article/Info 2: with rubber mount
- Material: Sheet Steel
- replacement in pairs recommended:
- Required quantity: 2
-
Name: Roolimine -
Kndmik OPEL T. VECTRA C LE/ PR - Manufacturer: MEY
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Rear Axle Left,
Upper, Rear Axle Right - Weight [kg]: 1.86
- Supplementary Article/Info 2: with bearing
- Manufacturer: SWAG
- Name: SW 40 92 7097
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle Left,
Lower - Material: Aluminium
-
Fabrication Number: ZWD-
PL- 009 -
paired article number: ZWD-
PL- 010 - Manufacturer: NTY
-
Name: NTY ZWD-
PL- 009
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle Right,
Front Axle, outer, Right, Lower - Material: Aluminium
-
Fabrication Number: ZWD-
PL- 010 -
paired article number: ZWD-
PL- 009
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Rear Axle Upper
- Control/Trailing Arm Type: Control Arm
- Material: Sheet Steel
- SVHC: No SVHC present!
-
Name: Ootshoob,
kndmik - Manufacturer: FAG
-
Fitting Position: Front Axle Right,
Lower - Control/Trailing Arm Type: Control Arm
- Manufacturer: JP GROUP
-
Lisainfo: Wishbone,
front, right -
Additional information: Wishbone,
front, right
-
Vehicle Identification Number (VIN) to: 48999999,
51999999 -
not for trim level: OPC,
VXR - Block Separation:
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles -
Vehicle Identification Number (VIN) from: 61000001,
68000001 - Control/Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Front Axle Left
- Control/Trailing Arm Design: Triangular Control Arm
-
Supplementary Article/Info 2: with ball joint,
with rubber mount - Supplementary Article/Supplementary Info: with holder
- paired article number: 206 462
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Vehicle Identification Number (VIN) to: 48999999,
51999999 -
not for trim level: OPC,
VXR - Block Separation:
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles -
Vehicle Identification Number (VIN) from: 61000001,
68000001 - Control/Trailing Arm Type: Control Arm
- Material: Aluminium
- Fitting Position: Front Axle Right
- Control/Trailing Arm Design: Triangular Control Arm
-
Supplementary Article/Info 2: with ball joint,
with rubber mount - Supplementary Article/Supplementary Info: with holder
- paired article number: 206 461
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Front Axle Left,
Lower - Control/Trailing Arm Type: Control Arm
-
Lisainfo: Wishbone,
front, left -
Additional information: Wishbone,
front, left
- Control/Trailing Arm Type: Control Arm
- Material: Sheet Steel
-
Fitting Position: Rear Axle,
Upper, both sides - Article number of recommended accessories: 39730 01
-
Name: Roolimine -
Kndmik OPEL T. VECTRA C LE/ PR - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
- Control/Trailing Arm Type: Control Arm
- Base body material: Aluminium
- Fitting Position: Front Axle Left
-
Net weight [kg]: 3,
162 - Diameter [mm]: 20
-
paired article number: G40.4072/
C - Diameter 1 [mm]: 20
- Supplementary Article/Info 2: with ball joint
-
Name: OMG G40.4071/
C - Manufacturer: OMG
- Control/Trailing Arm Type: Control Arm
- Base body material: Aluminium
- Fitting Position: Front Axle Right
- Net weight [kg]: 3.16
- Diameter [mm]: 20
-
paired article number: G40.4071/
C - Diameter 1 [mm]: 20
- Supplementary Article/Info 2: with ball joint
-
Name: OMG G40.4072/
C - Manufacturer: OMG
- not for trim level: OPC;VXR
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle,
Left - Material: Aluminium
-
paired article number: 72-
0952 - Manufacturer: MAX
Name: Roolimine - Kndmik OPEL P. VECTRA C 02- SAAB 9-3 LE
- not for trim level: OPC;VXR
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle,
Right - Material: Aluminium
-
paired article number: 72-
0949 - Manufacturer: MAX
Name: Roolimine - Kndmik OPEL P. VECTRA C 02- SAAB 9-3 PR
- Name: Control arm right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
OPEL VECTRA C, 02-
(kvaliteediklass: PJ)"
- Fitting Position: Lower Front Axle
- Control/Trailing Arm Type: Control Arm
- Material: Aluminium
- Warranty: 3 years warranty
- Weight [kg]: 3.2
- Manufacturer: SKV GERMANY
- Name: CE 04SKV006
- Fitting Position: Lower Front Axle
- Control/Trailing Arm Type: Control Arm
- Material: Aluminium
- Warranty: 3 years warranty
- Weight [kg]: 3.2
- Manufacturer: SKV GERMANY
- Name: CE 04SKV007
-
Fitting Position: Front Axle Right,
Lower - Control/Trailing Arm Type: Control Arm
- Material: Aluminium
-
paired article number: 20-
00491- 2 - Weight [kg]: 2.98
-
Name: DY 20-
00491- 1 - Manufacturer: DYS
- Fitting Position: Front Axle Right
- Control/Trailing Arm Type: Control Arm
- paired article number: 301181311800
- Manufacturer: MAG
Name: Roolimine - Kndmik OPEL P. VECTRA C 02- SAAB 9-3 PR
- Fitting Position: Front Axle Left
- Control/Trailing Arm Type: Control Arm
- paired article number: 301181311700
- Manufacturer: MAG
Name: Roolimine - Kndmik OPEL P. VECTRA C 02- SAAB 9-3 LE
- Control/Trailing Arm Type: Control Arm
- Length 2 [mm]: 333.5
- Fitting Position: Front Axle Right
- Cone Size [mm]: 20
- Inner Diameter [mm]: 12.1
- Material: Aluminium
-
Name: Ootshoob,
kndmik - Manufacturer: JPA
- Control/Trailing Arm Type: Control Arm
- Length 2 [mm]: 333.5
- Fitting Position: Front Axle Left
- Cone Size [mm]: 20
- Inner Diameter [mm]: 12.1
- Material: Aluminium
-
Name: Ootshoob,
kndmik - Manufacturer: JPA
- Fitting Position: Front Axle Left
- Material: Aluminium
- Control/Trailing Arm Type: Control Arm
- paired article number: 0383804
- Manufacturer: OCAP
- Fitting Position: Front Axle Left
- Material: Aluminium
- Control/Trailing Arm Type: Control Arm
- paired article number: 49398550
- Name: COC 49398527
- Manufacturer: CORTECO
- Fitting Position: Front Axle Right
- Control/Trailing Arm Design: Triangular Control Arm
- paired article number: VKDS 325022 B
- Hole Pitch 1/ Hole Pitch 2: 342
- Control/Trailing Arm Type: Control Arm
- Supplementary Article/Supplementary Info: with synthetic grease
- Supplementary Article/Info 2: with ball joint
- Name: SK VKDS325021B
- Manufacturer: SKF
- Fitting Position: Front Axle Left
- Control/Trailing Arm Design: Triangular Control Arm
- paired article number: VKDS 325021 B
- Hole Pitch 1/ Hole Pitch 2: 342
- Control/Trailing Arm Type: Control Arm
- Supplementary Article/Supplementary Info: with synthetic grease
- Supplementary Article/Info 2: with ball joint
- Name: SK VKDS325022B
- Manufacturer: SKF
- Control/Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right
- Cone Size [mm]: 20
- Inner Diameter [mm]: 12
- paired article number: 81217AL
- Name: ALT 81216AL
- Manufacturer: ALTE AUTOMOTIVE
- Control/Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left
- Cone Size [mm]: 20
- Inner Diameter [mm]: 12
- paired article number: 81216AL
- Name: ALT 81217AL
- Manufacturer: ALTE AUTOMOTIVE
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle,
Left - Supplementary Article/Info 2: with bolts
- paired article number: FT15520
- Manufacturer: FAST
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle,
Right - Supplementary Article/Info 2: with bolts
- paired article number: FT15519
- Manufacturer: FAST
- not for trim level: OPC
- paired article number: 23001
- Material: Aluminium
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle Right,
Lower - Weight [kg]: 2.98
-
Supplementary Article/Info 2: with bearing,
with ball joint - Supplementary Article/Supplementary Info: with holder
- Observe service information:
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Roolimine - Kndmik OPEL P. VECTRA C 02- SAAB 9-3 PR
- not for trim level: OPC
- paired article number: 23002
- Material: Aluminium
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle Left,
Lower - Weight [kg]: 2.98
-
Supplementary Article/Info 2: with bearing,
with ball joint - Supplementary Article/Supplementary Info: with holder
- Observe service information:
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Roolimine - Kndmik OPEL P. VECTRA C 02- SAAB 9-3 LE
- Fitting Position: Front Axle Right
- Material: Aluminium
- Control/Trailing Arm Type: Control Arm
- paired article number: 0393804
- Manufacturer: OCAP
- Fitting Position: Front Axle Right
- Control/Trailing Arm Type: Control Arm
- Material: Aluminium
- Bolt Ø [mm]: 20
- Supplementary Article/Info 2: with ball joint
- paired article number: 821 0293 10
- SVHC: No SVHC present!
-
Name: Ootshoob,
kndmik - Manufacturer: FAG
- Fitting Position: Front Axle Left
- Control/Trailing Arm Type: Control Arm
- Material: Aluminium
- Bolt Ø [mm]: 20
- Supplementary Article/Info 2: with ball joint
- paired article number: 821 0294 10
- SVHC: No SVHC present!
-
Name: Ootshoob,
kndmik - Manufacturer: FAG
- not for trim level: OPC
- paired article number: 40 92 3002
- Material: Aluminium
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle Left,
Lower - Weight [kg]: 2.98
- Supplementary Article/Supplementary Info: with holder
-
Supplementary Article/Info 2: with ball joint,
with bearing - Observe service information:
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
not for trim level: OPC,
VXR -
Fitting Position: Front Axle,
Left - Control/Trailing Arm Type: Control Arm
- Material: Aluminium
- paired article number: JTC1000
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
- not for trim level: OPC
- paired article number: 40 92 3001
- Material: Aluminium
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle Right,
Lower - Weight [kg]: 2.98
-
Supplementary Article/Info 2: with bearing,
with ball joint - Supplementary Article/Supplementary Info: with holder
- Observe service information:
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle Right
- Material: Aluminium
- Control/Trailing Arm Type: Control Arm
- paired article number: 49398527
- Manufacturer: CORTECO
-
Fitting Position: Lower,
Front Axle Right - Control/Trailing Arm Type: Control Arm
- Supplementary Article/Info 2: with rubber mount
- Material: Aluminium
- replacement in pairs recommended:
- Required quantity: 1
- paired article number: 616 050 0001
- Manufacturer: MEY
Name: Roolimine - Kndmik OPEL P. VECTRA C 02- SAAB 9-3 PR
-
Fitting Position: Lower,
Front Axle Left - Control/Trailing Arm Type: Control Arm
- Supplementary Article/Info 2: with rubber mount
- Material: Aluminium
- replacement in pairs recommended:
- Required quantity: 1
- paired article number: 616 050 0002
- Manufacturer: MEY
Name: Roolimine - Kndmik OPEL P. VECTRA C 02- SAAB 9-3 LE
- not for trim level: OPC
- paired article number: 34228
- Material: Aluminium
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle Left,
Lower - Weight [kg]: 3.429
-
Supplementary Article/Info 2: with bearing,
with ball joint - Supplementary Article/Supplementary Info: with attachment material
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Roolimine - Kndmik OPEL P. VECTRA C 02- SAAB 9-3 LE RUBY
- Fitting Position: Front Axle
- Warranty: 3 years warranty
- Name: CE 04SKV970
- Manufacturer: ESEN SKV
-
not for trim level: OPC,
VXR - Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle,
Right - Material: Aluminium
- Article number of recommended accessories: 39893 01
- paired article number: 36926 01
- Manufacturer: LMI
SVHC: No information available, please contact the manufacturer! Name: Roolimine - Kndmik OPEL P. VECTRA C 02- SAAB 9-3 PR
-
not for trim level: OPC,
VXR - Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle,
Left - Material: Aluminium
- Article number of recommended accessories: 39893 01
- paired article number: 36927 01
- Manufacturer: LMI
SVHC: No information available, please contact the manufacturer! Name: Roolimine - Kndmik OPEL P. VECTRA C 02- SAAB 9-3 LE
- Control/Trailing Arm Type: Control Arm
- Fitting Position: Front Axle
- Axle alignment required after fitting:
-
Article number of recommended accessories: V40-
1454 - Weight [kg]: 10.415
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.