• Supplementary Article/Info 2: with integrated air temperature sensor
• Fabrication Number: ECM-PL-000
• Manufacturer: NTY
• Name: NTY ECM-PL-000

• Engine Code: A 13 DTE
• Name: EP 1.830.357
• Manufacturer: EPS

for article number: 1.879.919, 1.879.936, 1.880.783, 1.880.809, 1.880.931, 1.880.986

• Supplementary Article/Info 2: with integrated air temperature sensor
• Fabrication Number: ECM-PL-001
• Manufacturer: NTY

• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• for OE number: 55216241
• Length [mm]: 62
• Fabrication Number: ECP-AR-011
• Manufacturer: NTY

• for OE number: 08 62 040
• Material: Plastic
• Number of connectors: 3
• Fabrication Number: ECS-PL-000
• Manufacturer: NTY

• Engine Code: Z13DTE
• Required quantity: 1
• Supplementary Article/Info 2: with integrated air temperature sensor
• Manufacturer: BREMI

• Number of pins: 4
• Pressure from [kPA]: 27
• Manufacturer: DELPHI
• Name: DE PS10144

• Fitting Position: Suction Pipe
• Vehicle Identification Number (VIN) to: A4999999, A6999999
• Connector Shape: oval
• Pressure from [bar]: 0.11
• Pressure to [bar]: 3.07
• Number of pins: 4
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 4
• Weight [kg]: 0.04
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV113

• Height [mm]: 28
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Alternatively:
• Number of pins: 4
• Supplementary Article/Info 2: with seal ring
• Alternative Repair Kit: 550734
• Fitting Depth [mm]: 22
• Manufacturer: ERA

• Engine Code: A 13 DTE, A 13 DTR
• Construction Year from: 10.2010
• for OE number: 1235084, 55219298, 22 36 500 02R
• Number of pins: 4
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Supplementary Article/Info 2: with integrated air temperature sensor
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Manufacturer: FAST

• Number of pins: 3
• Connector Shape: oval
• Number of connectors: 1
• for OE number: 55566186
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Measuring Range from [kPa]: 11
• Measuring Range to [kPa]: 307
• Measuring Range from [V]: 0.25
• Measuring Range to [V]: 4.75
• Number of connectors: 4
• Manufacturer: CALORSTAT BY VERNET

• Engine Code: A 13 DTE, A 13 DTR
• Construction Year from: 10.2010
• Vehicle Identification Number (VIN) from: B4000001, B6000001
• Manufacturer: BOSCH
• Name: BS 0281006028

• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Connector Shape: oval
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Manufacturer: FAST

• Voltage [V]: 12
• Corresponds to the original part in colour: grey
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Colour Coding: blue
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009121331

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: before soot particulate filter
• Vehicle Equipment: for vehicles with diesel soot filter
• Number of pins: 3
• for OE number: 08 62 040, 1 563 425, 51792301
• Manufacturer: TOPRAN

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: Z 13 DTE, A 13 DTE, A 13 DTR
• Construction Year from: 12.2009, 10.2010
• Construction Year to: 09.2010
• Block Separation:
• Vehicle Identification Number (VIN) to: A4999999, A6999999
• Temperature range from [°C]: -40
• Temperature range to [°C]: 130
• Manufacturer: BOSCH
• Name: BS 0281006076

• Length [mm]: 62.1
• Outer Diameter [mm]: 20.55
• Number of connectors: 3
• Weight [kg]: 0.03
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 3
• Material: Plastic
• Weight [kg]: 0.05
• for OE number: 08 62 040
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Opening pressure [kPa]: 4
• Manufacturer: DELPHI
• Name: DE DPS00017

• Vehicle Identification Number (VIN) from: B4000001, B6000001
• Length [mm]: 59
• Bore Ø [mm]: 7.4
• Number of connectors: 4
• Material: Plastic
• Weight [kg]: 0.027
• Supplementary Article/Info 2: with seal ring
• for OE number: 12 35 029
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 55564977
• Overall Length [mm]: 335
• Number of pins: 2
• Fabrication Number: EGT-PL-006
• Cable Length [mm]: 160
• Manufacturer: NTY

• Engine Code: A 13 DTE
• Fitting Position: after soot particulate filter
• for OE number: 08 62 715
• Connector Shape: oval
• Weight [kg]: 0.023
• Number of mounting bores: 1
• Vehicle Equipment: for vehicles with diesel soot filter
• Number of pins: 3
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of connectors: 3
• Material: Plastic
• Weight [kg]: 0.05
• for OE number: 08 62 040
• Manufacturer: SWAG
• Name: SW 40 94 5772

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: A 13 DTE, A13DTE/A13DTR
• Vehicle Identification Number (VIN) to: A6999999
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.082
• Manufacturer: EPS

• Number of connectors: 3
• Colour: black
• Operating Mode: Electric
• Weight [kg]: 0.019
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: Z 13 DTE
• Construction Year from: 12.2009
• Construction Year to: 09.2010
• Manufacturer: BOSCH

Technical Information: The product fitted must be identified on the vehicle or, engine

• Engine Code: A 13 DTE
• Fitting Position: after soot particulate filter
• Pressure from [kPA]: 3
• Pressure to [kPA]: 121
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Name: EP 1.993.273
• Manufacturer: EPS

• Number of connectors: 3
• Colour: black
• Operating Mode: Electric
• Weight [kg]: 0.019
• Supplementary Article/Info 2: with seal ring
• Manufacturer: SWAG
• Name: SW 70 10 2325

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: A 13 DTE
• Name: EP 1.953.380
• Manufacturer: EPS

• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS10727-12B1

• Alternatively:
• Number of connectors: 3
• Alternative Repair Kit: 550732
• Manufacturer: ERA

• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 28
• Weight [kg]: 0.022
• Resistor [Ohm]: 850
• Rated Voltage [V]: 12
• Housing Diameter [mm]: 20.7
• Manufacturer: ERA

• Engine Code: Z13DTE
• Supplementary Article/Supplementary Info: with seal
• Number of mounting bores: 1
• Pressure [Pa] from: 11,000
• Pressure [Pa] to: 307,000
• Voltage [V]: 5
• Resistor [Ohm]: 2,080
• Number of pins: 4
• Sensor Type: NTC Sensor
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PP009400291
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fuel Mixture Formation: Common Rail (CR)
• Fabrication Number: EFP-FT-004
• Name: NTY EFP-FT-004
• Manufacturer: NTY

• Fuel Mixture Formation: Direct Injection
• Supplementary Article/Info 2: High Pressure Side
• Fabrication Number: EFP-FT-000
• Manufacturer: NTY
• Name: NTY EFP-FT-000

• Pressure [Pa] to: 120,000
• Number of pins: 3
• Manufacturer: FAE

• Pressure [Pa] to: 120,000
• Voltage from [V]: 0.4
• Voltage to [V]: 4.5
• Number of pins: 3
• Warranty: 5 years warranty
• Name: HU 137406
• Manufacturer: HUECO / HITACHI

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Construction Year from: 10.2010
• Manufacturer Restriction: am Fahrzg. ermitteln
• Number of pins: 4
• Sensor Type: NTC Sensor
• Version: AM
• Manufacturer: METZGER

• Construction Year from: 12.2009
• Fuel Mixture Formation: Common Rail (CR)
• Number of pins: 3
• Supplementary Article/Info 2: High Pressure Side
• Weight [kg]: 0.07
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV619
• Manufacturer: ESEN SKV

• for OE number: 08 36 655
• Manufacturer: KAMOKA

• Length [mm]: 50.7
• Thread Size: M18x1,5 mm
• Pressure to [bar]: 1,800
• Number of pins: 3
• Weight [kg]: 0.07
• Warranty: 3 years warranty
• Temperature range from [°C]: -40
• Temperature range to [°C]: 125
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV734
• Manufacturer: ESEN SKV

• Fabrication Number: EPP-PL-036
• Number of pins: 5
• Manufacturer: NTY

• Engine Code: A 13 DTE, A13DTE/A13DTR
• Vehicle Identification Number (VIN) to: A6999999
• Sensor Type: Inductive Sensor
• Number of pins: 4
• for OE number: 55 219 298
• Weight [kg]: 0.045
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 12.2009
• Manufacturer: BOSCH

• Fabrication Number: EPP-PL-026
• Manufacturer: NTY

• Number of pins: 4
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Manufacturer: FAE

• Number of pins: 4
• Supplementary Article/Info 2: with seal ring
• Fitting Depth [mm]: 22
• Manufacturer: ERA

• Voltage [V]: 12
• Cable Length [mm]: 175
• Number of pins: 2
• Warranty: 3 years warranty
• Weight [kg]: 0.08
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV067

• Weight [kg]: 0.2
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV166

Manufacturer: MAGNETI MARELLI

• Fitting Position: Catalytic Converter
• External Thread Size: M14 x 1,5
• Spanner Size: 17
• Number of connectors: 2
• Cable Length [mm]: 150
• Weight [kg]: 0.07
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M14x1,5
• Length [mm]: 274
• Manufacturer: MAGNETI MARELLI

• Engine Code: A 13 DTE, Z 13 DTE, A 13 DTR
• Construction Year from: 01.2010
• Construction Year to: 11.2010
• Alternatively:
• Number of pins: 4
• Inlet Ø [mm]: 70
• Outlet Ø [mm]: 70
• Manufacturer: ERA

• Fitting Position: before soot particulate filter
• Mounting Type: Bolted
• Number of pins: 2
• Cable Length [mm]: 160
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT358181181
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: A 13 DTE
• Housing Type: with housing
• Length [mm]: 92
• Inner Diameter [mm]: 70
• Outer Diameter [mm]: 70
• Name: EP 1.991.465
• Manufacturer: EPS

• Construction Year from: 06.2010
• Quantity: 1
• Cable Length [mm]: 175
• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE TS30065

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Colour: red
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Lambda Sensor: Regulating Probe, Broadband lambda sensor, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 530
• Name: DE ES21351-12B1
• Manufacturer: DELPHI

Manufacturer: MAGNETI MARELLI

• Thread Size: M14x1,5
• Cable Length [mm]: 215
• Socket colour: black
• Fitting Position: before catalytic converter
• Manufacturer: FAE

• Housing Type: with housing
• Number of pins: 5
• Inlet Ø [mm]: 70
• Outlet Ø [mm]: 70
• Manufacturer: ERA

• Fitting Position: before soot particulate filter
• Mounting Type: Bolted
• Number of pins: 2
• Cable Length [mm]: 222
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT014494021
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: after catalytic converter
• Lambda Sensor: Broadband lambda sensor, Regulating Probe
• Number of pins: 5
• Connector Shape: D Shape
• Cable Length [mm]: 440
• for article number: 81603E
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Construction Year from: 12.2009
• Recommended additional repairs: Air Filter
• Manufacturer: BOSCH
• Name: BS 0281002940

• Housing Type: with housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: DE AF10398-12B1
• Manufacturer: DELPHI

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Manufacturer: BREMI

• Thread Size: M18 x 1,5
• Number of pins: 3
• Weight [kg]: 0.064
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 50
• External Thread Size: M18 x 1,5
• Spanner Size: 27
• Number of connectors: 3
• Screw length below head [mm]: 16
• Weight [kg]: 0.057
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 12.2009
• for OE number: 93196444
• Fuel Mixture Formation: Common Rail (CR)
• Supplementary Article/Info 2: High Pressure Side
• Manufacturer: BOSCH

• Construction Year from: 01.2010
• Construction Year to: 11.2010
• Number of pins: 4
• Connector Shape: oval
• Sensor Type: Hot-film Sensor
• Voltage [V]: 12
• Length [mm]: 108
• Width [mm]: 125
• Height [mm]: 108
• Weight [kg]: 0.25
• Manufacturer: VALEO

• Construction Year from: 12.2009
• for OE number: 55573331, 55573467
• Block Separation:
• Fuel Mixture Formation: Common Rail (CR)
• Supplementary Article/Info 2: High Pressure Side
• Manufacturer: BOSCH
• Name: BS 0281006158

• Vehicle Identification Number (VIN) to: 94, 96129269
• Block Separation:
• Manufacturer: METZGER

• Fitting Position: before soot particulate filter
• Connector Shape: oval
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 50
• Cable Length [mm]: 150
• Thread Size: M14x1.5
• Supplementary Article/Supplementary Info: with synthetic grease