• Engine Code: M9T 670
• Number of pins: 2
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: MAX

• Number of pins: 3
• Fabrication Number: ECP-NS-016
• Manufacturer: NTY

• Engine Code: M9T 670
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

for article number: 1.880.666, 1.880.703S, 1.880.706, 1.880.710S, 1.880.716, 1.880.718, 1.880.719, 1.880.720, 1.880.737, 1.880.782, 1.880.785, 1.880.883, 7.8916, 1.880.930

• Engine Code: M9T 670
• Number of pins: 3
• Sensor Type: Hall Sensor
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

Fabrication Number: ECM-NS-000

• Number of pins: 3
• Fabrication Number: ECM-NS-004
• Manufacturer: NTY

• Number of pins: 3
• Connector Shape: rectangular
• Fitting Depth [mm]: 28.2
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Number of pins: 3
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: with seal ring
• Housing Colour: black
• Weight [kg]: 0.024
• Manufacturer: ERA

• Engine Code: M9T 670, M9T 676, M9T 680, M9T 672
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

• Engine Code: M9T 670
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Construction Year to: 09.2015
• Engine Code: M9T.6.80,M9T.8.70
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.04
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

• Engine Code: M9T 670, M9T 676, M9T 680, M9T 672
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS

• Required quantity: 1
• Manufacturer: BRM

Name: CZUJNIK CI—N. POWIETRZA RENAULT GRAND SCENIC 2,0DCI 05-

• Number of pins: 3
• Sensor Type: Hall Sensor
• Housing Colour: black
• Fitting Depth [mm]: 28.2
• Manufacturer: FAE

• Number of pins: 3
• Fitting Depth [mm]: 28
• Housing Colour: black
• Weight [kg]: 0.024
• Manufacturer: ERA

• for OE number: 82 00 974 421
• Number of pins: 3
• Connector Shape: oval
• Socket colour: blue
• Fabrication Number: ECS-RE-001

• Number of pins: 3
• Warranty: 5 years warranty
• Name: Andur, heitgaasisurve
• Manufacturer: HUC

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Exhaust System: before soot particulate filter
• Engine Code: M9T870, M9T880
• not for country specific design: Mexico
• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: Andur, heitgaasisurve
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Weight [kg]: 0.03
• Warranty: 3 years warranty
• Name: CE 17SKV777
• Manufacturer: ESEN SKV

• Emission Standard: Euro 5
• Number of pins: 3
• Opening pressure [kPa]: 1
• Manufacturer: DELPHI
• Name: DE DPS00015

• for OE number: 4420748, 82 00 916 762
• Number of pins: 2
• Socket colour: grey
• Fabrication Number: EGT-RE-012
• Cable Length [mm]: 400

• Exhaust System: before soot particulate filter
• Engine Code: M9T 870, M9T 880
• Number of pins: 3
• Pressure [Pa] from: 0
• Pressure [Pa] to: 150,000
• for OE number: 208150007R
• Name: Andur, heitgaasisurve
• Manufacturer: NRF

• Engine Code: M9T 670
• Pressure from [kPA]: 31
• Pressure to [kPA]: 372
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.177
• Manufacturer: EPS

• Emission Standard: Up to Euro 5
• Number of pins: 3
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: MEY

• Engine Code: M9T 670, M9T 676, M9T 680, M9T 672
• Fuel Mixture Formation: Common Rail (CR)
• Supplementary Article/Info 2: High Pressure Side
• Name: Andur,ktuserohk
• Manufacturer: MAX

• Engine Code: M9T 670, M9T 676, M9T 680, M9T 672
• Weight [kg]: 0.05
• Warranty: 3 years warranty
• Name: CE 17SKV735
• Manufacturer: ESEN SKV

• Number of pins: 3
• Supplementary Article/Supplementary Info: without accessories
• Manufacturer: FAST

• Number of pins: 3
• Colour: black
• Pressure [Pa] to: 150,000
• Supplementary Article/Info 2: without connection line
• Manufacturer: AIC

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Supplementary Article/Info 2: with seal ring, without cable
• Pressure from [kPA]: 31.1
• Pressure to [kPA]: 372
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PP009400751
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Emission Standard: Up to Euro 5
• for OE number: 22770-00Q0A
• Connector Shape: oval
• Number of circuits: 1
• Number of mounting bores: 1
• Number of pins: 3
• Weight [kg]: 0.019
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pressure hose connector diameter [mm]: 5, 6.5
• Length [m]: 1
• Material: Silicone
• Chemical Properties: Oil resistant
• Temperature range from [°C]: -40
• Temperature range to [°C]: +350
• Clamping range from [mm]: 10, 11, 11.5, 12.5
• Clamping range to [mm]: 12.5, 13.5, 14, 15
• SVHC: No SVHC present!
• Manufacturer: HBE

Exhaust System: for vehicles with factory fitted soot -/particulate filter Supplementary Article/Info 2: with connection line, with protection hose, with marten protection, with clamps Technical Information: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• for OE number: 4421234, 82 00 940 349
• Cable Length [mm]: 660
• Number of pins: 2
• Warranty: 3 years warranty
• Exhaust System: after soot particulate filter
• Weight [kg]: 0.08
• Shape: straight
• Name: CE 30SKV373
• Manufacturer: ESEN SKV

• Fitting Position: after soot particulate filter
• Engine Code: M9T 670, M9T 680, M9T 880, M9T 870, M9T 876
• Number of pins: 2
• Cable Length [mm]: 500
• Sensor Type: NTC Sensor
• Name: Andur, heitgaasitemperatuur
• Manufacturer: MEY

• Housing Type: with housing
• Fabrication Number: EPP-PL-022
• Manufacturer: NTY

• Warranty: 3 years warranty
• Weight [kg]: 0.08
• Name: CE 30SKV333
• Manufacturer: ESEN SKV

• Warranty: 3 years warranty
• Weight [kg]: 0.08
• Name: CE 30SKV334
• Manufacturer: ESEN SKV

• Fitting Position: before soot particulate filter
• for OE number: 4423734, 226400467R
• Required quantity: 1
• Quality: OE
• Thread Size: M12x1.25
• Cable Length [mm]: 628
• Sensor Type: NTC Sensor
• Number of pins: 2
• Weight [g]: 44
• Gross Weight [g]: 72
• Name: DN DET-0156
• Manufacturer: DENSO

• Cable Length [mm]: 430
• Fitting Depth [mm]: 55
• Manufacturer: FAST

• Fitting Position: after soot particulate filter
• Cable Length [mm]: 660
• Number of pins: 2
• Manufacturer: FAST

• Fitting Position: after catalytic converter
• Cable Length [mm]: 460
• Number of pins: 2
• Manufacturer: FAST

• Engine Code: M9T 670, M9T 680
• Number of pins: 3
• Number of circuits: 1
• Connector Shape: oval
• Number of mounting bores: 1
• Pressure to [kPA]: 150
• for OE number: 82 01 043 914, 82 00 741 321, 22 77 096 04R
• Manufacturer: MEAT&DORIA

• Number of connectors: 3
• Supplementary Article/Info 2: without fastening clamp
• Additionally required articles (article numbers): 8201428503
• Manufacturer: ERA

• Number of pins: 3
• Connector Shape: oval
• Number of circuits: 1
• for OE number: 82 00 974 421
• Manufacturer: MEAT&DORIA

• Engine Code: M9T 670
• Housing Type: with housing
• Length [mm]: 106
• Inner Diameter [mm]: 80
• Outer Diameter [mm]: 80
• Name: EP 1.991.450
• Manufacturer: EPS

• Engine Code: M9T 670, M9T 676, M9T 680, M9T 672
• Fuel Mixture Formation: Common Rail (CR)
• Supplementary Article/Info 2: High Pressure Side
• Name: ANDUR,KšTUSEROHK
• Manufacturer: BOS

• Exhaust System: before soot particulate filter
• Engine Code: M9T 670
• Cable Length [mm]: 460
• Number of pins: 2
• Quality: IAM
• Manufacturer: METZGER

• Fuel Mixture Formation: Common Rail (CR)
• Supplementary Article/Info 2: High Pressure Side
• for article number: 9868
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe, Planar probe
• Cable Length [mm]: 190
• Length [mm]: 330
• Number of circuits: 5
• Manufacturer: METZGER

• Number of pins: 4
• Manufacturer: FAST

• Housing Type: with housing
• Number of pins: 4
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI
• Name: DE AF10628-12B1

• Fitting Position: Exhaust Turbocharger
• Number of pins: 2
• Cable Length [mm]: 250
• Sensor Type: NTC Sensor
• Name: Andur, heitgaasitemperatuur
• Manufacturer: MEY

• Mounting Type: Pipe-neck
• Number of pins: 4
• Pipe socket mounting diameter [mm]: 80
• Suction pipe connector diameter [mm]: 80
• Supplementary Article/Supplementary Info: without attachment material
• Assy./disassy. by qualified personnel required!:
• Name: Ohumassimootja
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fuel Mixture Formation: Common Rail (CR)
• Supplementary Article/Info 2: High Pressure Side
• for article number: 9868
• Manufacturer: MEAT&DORIA

• Number of pins: 4
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HÜCO

• Number of pins: 6
• Connector Shape: oval
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Vehicle Equipment: for vehicles with manual transmission
• for OE number: 18 01 016 26R
• Name: Pedaalikomplekt
• Manufacturer: MD

• Exhaust System: behind turbocharger
• Shape: straight
• Number of pins: 2
• Socket colour: brown
• Cable Length [mm]: 220
• for OE number: 4420680, 82 00 930 751
• Manufacturer: MEAT&DORIA

• Exhaust System: before turbocharger
• Engine Code: M9T 880
• Number of pins: 3
• for OE number: 1401000Q0C