Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Cable Length [mm]: 110,
150 - Length [mm]: 40
- Number of circuits: 1
- Plug Type: Shrink Connector
- Connector Shape: round
-
Glow Plug Design: Pencil-
type Glow Plug - Cable insulation material: Silicone
-
Material: CuSn
(copper- tin) - Cable Cross Section [mm²]: 2.5
-
Name: Kaabli remondikomplekt,
hoogknal - Manufacturer: MD
- Additional information: 25026 MD
- Lisainfo: 25026 MD
-
Cable Length [mm]: 95,
150 - Fitting Position: Glow plug side
- Length [mm]: 60
- Number of circuits: 1
- Plug Type: Shrink Connector
- Connector Shape: round
-
Glow Plug Design: Pencil-
type Glow Plug - Cable insulation material: Silicone
-
Material: CuSn
(copper- tin) - Cable Cross Section [mm²]: 2.5
-
Name: Kaabli remondikomplekt,
hoogknal - Manufacturer: MD
- Additional information: 25002 MD
- Lisainfo: 25002 MD
- Fitting Position: Engine Compartment
- Cable Length [mm]: 0
-
Mounting Type: Plug-
in connection - Supplementary Article/Supplementary Info: with plug insert
- short version:
- Number of circuits: 1
- Weight [kg]: 0.009
- Supplementary Article/Info 2: with multi plug
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Engine Compartment
- Cable Length [mm]: 0
-
Mounting Type: Plug-
in connection - Supplementary Article/Supplementary Info: with plug insert
- Number of circuits: 1
- Weight [kg]: 0.015
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Actuator,
headlight levelling - Cable Length [mm]: 300
-
Mounting Type: Plug-
in connection - Supplementary Article/Supplementary Info: with shrink connector
- Supplementary Article/Info 2: with plug
- Number of circuits: 6
- Weight [kg]: 0.022
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Cable Length [mm]: 100
- Conductor Number: 5
- for OE number: 240660093
-
Name: Paranduskomplekt,
kaablikomplekt - Manufacturer: MD
- Supplementary Article/Supplementary Info: with accessories
- Number of pins: 19
- Number of circuits: 12
- Weight [kg]: 0.08
- Warranty: 3 years warranty
- Manufacturer: SKV GERMANY
- Name: CE 53SKV127
- Supplementary Article/Supplementary Info: with accessories
- Number of pins: 19
- Number of circuits: 12
- Weight [kg]: 0.08
- Warranty: 3 years warranty
- Manufacturer: SKV GERMANY
- Light Design: Xenon
- Sensor Type: Lever Sensor
-
Manufacturer Restriction: BMW/
FIAT/ FORD, MERCEDES/ VAG - Number of circuits: 5
- Number of connectors: 6
- Cable Length [mm]: 100
- Cable cross-section from [mm²]: 0.5
- Plug Type: Shrink Connector
- Material: Silicone
- Cable Cross Section [mm²]: 0.5
- Manufacturer: METZGER
- Number of circuits: 15
-
Fitting Position: Rear,
both sides - Cable Length [mm]: 200
- Observe service information:
-
Name: Kaabli remondikomplekt,
uks - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of circuits: 12
- Supplementary Article/Supplementary Info: with squeeze connector
-
Fitting Position: Rear,
both sides - Cable Length [mm]: 200
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Vehicle Door,
both sides, Rear - Cable Length [mm]: 200
-
Vehicle Equipment: for vehicles without keyless Entry/
Go system - Supplementary Article/Info 2: without bellow
- Number of circuits: 12
- Weight [kg]: 0.055
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Cable Length [mm]: 200
- Conductor Number: 15
- Cable cross-section from [mm²]: 0.5
- Cable cross-section to [mm²]: 1.5
-
Material: CuSn
(copper- tin) - Cable insulation material: Silicone
- Number of circuits: 15
- Plug Type: Butt Joint
- Supplementary Article/Info 2: without bellow
-
Fitting Position: Right Rear,
Left Rear, Vehicle Door - Comfort Equipment Variant (trim package): for vehicles with central locking
- Manufacturer: MEAT&DORIA
Vehicle Equipment: for vehicles with electric window regulators, for vehicles with keyless Entry/Go system
- Cable Length [mm]: 200
- Conductor Number: 12
- Cable cross-section to [mm²]: 1.5
- Cable cross-section from [mm²]: 0.5
-
Material: CuSn
(copper- tin) - Cable insulation material: Silicone
- Number of circuits: 12
- Plug Type: Butt Joint
- Supplementary Article/Info 2: without bellow
-
Fitting Position: Right Rear,
Left Rear, Vehicle Door - Comfort Equipment Variant (trim package): for vehicles with central locking
- Manufacturer: MEAT&DORIA
Vehicle Equipment: for vehicles with electric window regulators, for vehicles without keyless Entry/Go system
- Number of circuits: 12
-
Fitting Position: Rear,
both sides - Cable Length [mm]: 200
- Observe service information:
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Cable Length [mm]: 180,
200 - Conductor Number: 12
- Cable cross-section to [mm²]: 1.5
- Cable cross-section from [mm²]: 0.5
-
Material: CuSn
(copper- tin) - Cable insulation material: Silicone
- Number of circuits: 12
- Plug Type: Butt Joint
- Supplementary Article/Info 2: with bellow
-
Fitting Position: Right Rear,
Left Rear, Vehicle Door - Comfort Equipment Variant (trim package): for vehicles with central locking
- Manufacturer: MEAT&DORIA
Vehicle Equipment: for vehicles with electric window regulators, for vehicles without keyless Entry/Go system
- Cable Length [mm]: 200
- Conductor Number: 15
- Cable cross-section from [mm²]: 0.5
- Cable cross-section to [mm²]: 1.5
-
Material: CuSn
(copper- tin) - Cable insulation material: Silicone
- Number of circuits: 15
- Plug Type: Butt Joint
- Supplementary Article/Info 2: with bellow
-
Fitting Position: Right Rear,
Left Rear, Vehicle Door - Comfort Equipment Variant (trim package): for vehicles with central locking
-
Name: Paranduskomplekt,
kaablikomplekt - Manufacturer: MD
Vehicle Equipment: for vehicles with electric window regulators, for vehicles with keyless Entry/Go system
- Number of circuits: 15
-
Fitting Position: Rear,
both sides - Cable Length [mm]: 200
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Vehicle Door,
Left Rear, Right Rear - Cable cross-section to [mm²]: 1.5
- Cable insulation material: Silicone
-
Material: CuSn
(copper- tin) - Comfort Equipment Variant (trim package): for vehicles with central locking
- Vehicle Equipment: for vehicles with electric window regulators
- Supplementary Article/Info 2: without bellow
- Plug Type: Butt Joint
- Cable Length [mm]: 200
- Number of circuits: 12
- Manufacturer: METZGER
- Manufacturer Restriction: Opel
-
Fitting Position: Rear,
both sides - Conductor Number: 12
- Cable Length [mm]: 200
-
Supplementary Article/Info 2: with bellow,
with fastening clamp -
Supplementary Article/Supplementary Info: with squeeze connector,
with socket housing -
Vehicle Equipment: for vehicles without keyless Entry/
Go system - Cross Section [mm²] from: 0.5
- Cross Section [mm²] to: 1.5
- Cable insulation material: Silicone
- SVHC: No SVHC present!
-
Name: Kaabli remondikomplekt,
uks - Manufacturer: HBE
- not for trim level: Open & Start
-
Fitting Position: Left Rear,
Right Rear - Comfort Equipment Variant (trim package): for vehicles with central locking
- Vehicle Equipment: for vehicles with electric window regulators
- Number of circuits: 12
- Cable Length [m]: 200
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks