• Pressure [bar]: 0.4
• Pressure from [bar]: 0.35
• Pressure to [bar]: 0.45
• Combi Switch Function: Normally Closed Contact
• Colour: blue
• Spanner Size: 24
• Thread Size: M10 x 1
• Number of pins: 1
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Number of pins: 2
• Manufacturer: JP GROUP
• Lisainfo: Sender Unit, coolant temperature
• Additional information: Sender Unit, coolant temperature

• Connector Shape: round
• Operating Mode: Hydraulic
• Thread Size: M 10
• Thread Pitch [mm]: 1
• Number of pins: 1
• Switch point from [bar]: 0.3
• Switch point to [bar]: 0.55
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Seerianumber: ECT-PL-005
• Manufacturer: NTY
• Name: NTY ECT-PL-005

• Thread Size: M10x1
• Spanner Size: 24
• Colour: blue
• Pressure from [bar]: 0.3
• Pressure to [bar]: 0.55
• Name: OLISURVELšLITUS
• Manufacturer: MAX

• Engine Code: A 14 NEL
• Pressure [bar]: 1
• Thread Size: M10x1
• Spanner Size: 24
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Engine Code: A 14 NEL
• Pistikkontaktide arv: 2
• Manufacturer: KAVO

• Housing Colour: black
• for OE number: 55353807
• Manufacturer: KAMOKA

• Surve (bar): 0,4
• Keermemõõt: M10 x 1
• Pistikkontaktide arv: 1
• tehnilise informatsiooni number: circuit N.C.
• Manufacturer: ERA

• Pressure [bar]: 5.5
• Housing Colour: blue
• Thread Size: M10×1-6g
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Switch Pressure [bar]: 0.5
• Thread Size: M10x1.0
• Sensor Type: Closed-type Sensor
• Name: OLISURVELšLITUS
• Manufacturer: VER

• Colour Coding: grey
• Connector Shape: oval
• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• for OE number: 55591002
• Manufacturer: DELLO AUTOMEGA

• Thread Size: M 10x1
• Housing Colour: black
• Manufacturer: FAE
• Additional information: FE12436
• Lisainfo: FE12436

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: oval
• Number of pins: 2
• Socket colour: black
• for OE number: 55353807
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Keermemõõt: M10 x 1
• Võtmekaugus: 24
• Surve alates (bar): 0,3
• Surve (bar) kuni: 0,55
• Pistikkontaktide arv: 1
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Material: Plastic, Metal
• Number of pins: 2
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: MAX

• Fitting Position: Radiator
• Connector Shape: oval
• Colour Coding: black
• Sensor Type: NTC Sensor
• Number of pins: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: A 14 NEL
• Housing Colour: black
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• new version:
• Switch point from [bar]: 0.3
• Switch point to [bar]: 0.55
• External Thread Size: M10 x 1
• Spanner Size: 22
• Number of connectors: 1
• Colour: blue
• Surface: Zinc-coated
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with damping, with seal ring
• Name: OLISURVELšLITUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• new version:
• Switch point from [bar]: 0.3
• Switch point to [bar]: 0.55
• External Thread Size: M10 x 1
• Spanner Size: 22
• Number of connectors: 1
• Colour: blue
• Surface: Zinc-coated
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring, with damping
• Manufacturer: SWAG
• Name: SW 40 92 7223

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Tightening torque to [Nm]: 20
• Voltage [V]: 12
• Pressure from [bar]: 0.4
• Thread Size: M10x1
• Spanner Size: 24
• Length [mm]: 51
• Colour Coding: black
• Name: MM SAA103
• Manufacturer: MAGNETI MARELLI

• Pistikkontaktide arv: 2
• Manufacturer: ERA

• Colour: black
• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Korpuseläbimõõt (mm): 9
• Pistikukatte kuju: ovaalne
• Värv: must
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 2
• soovitava lisavarustuse artiklinumber: 2324012
• Võimsus [W]: 0,06
• Manufacturer: METZGER

• Tightening torque from [Nm]: 20
• Voltage [V]: 12
• Combi Switch Function: Normally Closed Contact
• Current Strength [A]: 0.25
• Tolerance [%]: 15
• Thread Size: M10x1
• Spanner Size: 24
• Pressure from [bar]: 0.35
• Pressure to [bar]: 0.55
• Number of pins: 1
• Corresponds to the original part in colour: blue
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA
• Name: HE 6ZL008780011

• Pistikkontaktide arv: 3
• Seerianumber: ECP-PL-032

• Number of connectors: 2
• Material: Plastic, Metal
• Weight [kg]: 0.015
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.012
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Mounting Type: Clamped
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT358058221

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Seerianumber: ECP-PL-027
• Pistikkontaktide arv: 3
• Manufacturer: NTY

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: not have
• Thread Size: not have

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Housing Colour: black
• Number of pins: 2
• Spanner Size: 0
• Manufacturer: DELPHI
• Name: DE TS10468

• Thread Size: 9 mm
• Manufacturer: VERNET

• Supplementary Article/Info 2: with seal ring, without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of connectors: 2
• Material: Plastic, Metal
• Weight [kg]: 0.015
• Supplementary Article/Info 2: with seal ring
• Manufacturer: SWAG
• Name: SW 40 93 7083

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Position/Degree: 0
• Vehicle Equipment: for vehicles without start-stop function
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Name: Andur, v„ntvoll
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Length [mm]: 51
• Width [mm]: 26
• Thickness [mm]: 23
• Number of connectors: 2
• Weight [kg]: 0.04
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 2
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009168381

Brief Information: *** HELLA Electronics OE competence for over 60 years.

Manufacturer: FAE

• Length [mm]: 50
• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: white
• Manufacturer: BREMI

• Vehicle Identification Number (VIN) to: EG999999, E0999999, E1999999, E3999999, E8999999
• Vehicle Equipment: for vehicles without start-stop function
• Block Separation:
• Vehicle Identification Number (VIN) from: FG000001, F0000001, F1000001, F3000001, F8000001
• Length [mm]: 50
• Width [mm]: 40
• Thickness [mm]: 24
• Number of connectors: 3
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR, VŽNTVOLL
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11352

• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE SS11334

• Vehicle Equipment: for vehicles without start-stop function
• Pistikkontaktide arv: 3
• Kaal (kg): 0,03
• Garantii: 3 aastat garantii
• Manufacturer: SKV GERMANY

• Resistor Type: Hall Sensor
• Height [mm]: 24.1
• Manufacturer: VERNET

• Vehicle Identification Number (VIN) from: F0000001
• Vehicle Equipment: for vehicles with start-stop function
• Resistor Type: Hall Sensor
• Height [mm]: 34.5
• Manufacturer: VERNET

• Vehicle Identification Number (VIN) from: F0000001, F1000001, F3000001, F8000001, FG000001
• Vehicle Equipment: for vehicles with start-stop function
• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Number of pins: 3
• Sensor Type: Hall Sensor
• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Number of pins: 3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: DLP

• Vehicle Equipment: for vehicles with start-stop function
• Vehicle Identification Number (VIN) from: F0000001, F1000001, F3000001, F8000001, FG000001
• Length [mm]: 50
• Required quantity: 1
• Material: Plastic
• Number of pins: 3
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 34.5
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Weight [kg]: 0.013
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda andur: Diagnoosisond, Keere eelmääritud
• Ülekandeliinide arv: 4
• pikkus üle kõige (mm): 340
• Installatsiooni pool: pärast katalüsaatorit
• Seerianumber: ESL-DW-008
• Manufacturer: NTY

• Installatsiooni pool: ees, katalüsaatori ees
• Lambda andur: Sond, Keere eelmääritud
• Seerianumber: ESL-DW-004
• Manufacturer: NTY

• Chemical Properties: Oil resistant
• Number of pins: 1
• Cable Length [mm]: 80
• Cable Cross Section [mm²]: 1
• Contact surface: Tin-plated
• Supplementary Article/Info 2: with copper casing, with protection hose
• Supplementary Article/Supplementary Info: with cable tie
• Temperature range from [°C]: -25
• Temperature range to [°C]: +125
• SVHC: No SVHC present!
• Name: šhenduskaabel, olisurvelliti
• Manufacturer: HBE

Manufacturer Restriction: Opel, Fiat, Peugeot, Alfa Romeo, Lancia, Suzuki, Ford, Citroen

• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Vehicle Identification Number (VIN) to: EG999999, E0999999, E1999999, E3999999, E8999999
• Vehicle Equipment: for vehicles with start-stop function
• Number of connectors: 3
• Weight [kg]: 0.015
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda andur: Diagnoosisond, Keere eelmääritud
• Seerianumber: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Number of pins: 3
• Housing Colour: white
• Sensor Type: Hall Sensor
• Manufacturer: FAE

• Engine Code: A14NEL,B14NET
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.03
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

• Seerianumber: EPP-CH-008
• Manufacturer: NTY

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Takistus [oom]: 9
• Rakendustüüp: elektriline
• Garantii: 3 aastat garantii
• Manufacturer: SKV GERMANY

• Fitting Position: Front
• Exhaust System: before catalytic converter
• Lambda Sensor: Regulating Probe
• Number of connectors: 4
• Length [mm]: 525
• Manufacturer: VERNET

• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 3
• Installatsiooni sügavus (mm): 28
• Kaal (kg): 0,022
• Takistus [oom]: 850
• Nominaalpinge (V): 12
• Korpuseläbimõõt (mm): 20,7
• Manufacturer: ERA

• Construction Year to: 12.2015
• Lambda Sensor: Regulating Probe, Diagnostic Probe, Finger probe
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

Fitting Position: before catalytic converter, after catalytic converter

• Construction Year to: 12.2015
• Vehicle Equipment: for vehicles with start-stop function
• Name: ANDUR, VŽNTVOLL
• Manufacturer: BOS

• for OE number: 08 36 005
• Manufacturer: KAMOKA

• Fitting Position: Front
• Exhaust System: after catalytic converter
• Lambda Sensor: Diagnostic Probe
• Length [mm]: 400
• Number of connectors: 4
• Manufacturer: VERNET

• Construction Year to: 12.2015
• Vehicle Equipment: for vehicles without start-stop function
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: BOS

• Vehicle Equipment: for vehicles without start-stop function
• Transmission Type: Manual Transmission, Automatic Transmission
• Transmission ID: M32
• Block Separation:
• Housing Type: without housing
• Number of pins: 5
• Fitting Position: Air Filter Housing
• Supplementary Article/Info 2: with integrated air temperature sensor
• New Part:
• Used part return not required:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 12.2015
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 460
• Name: Lambda andur
• Manufacturer: MAX

• Lambda Sensor: Unheated
• Number of pins: 4
• Cable Length [mm]: 520
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Pistikkontaktide arv: 4
• Lambda andur: Titaanandur
• Pinge [V]: 12
• pikkus üle kõige (mm): 500
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Required quantity: 1
• Cable Length [mm]: 220
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: LAMBDA ANDUR
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: A 14 NEL, B 14 NEL
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

Lambda Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 12.2015
• Vehicle Equipment: for vehicles without start-stop function
• Quality class: PJ
• Name: Air flow sensor

• for OE number: 08 36 009
• Manufacturer: KAMOKA

• for OE number: 836029
• Manufacturer: KAMOKA

• Line insulation design: with silicone-coated woven-fibre insulation
• Overall Length [mm]: 448
• Weight [kg]: 0.11
• Lambda Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Fitting Position: before catalytic converter, after catalytic converter Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pinge [V]: 12
• Pistikkontaktide arv: 8
• Seerianumber: EPP-PL-030

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Block Separation:
• Exhaust System: for pre-catalytic converter
• Cable Length [mm]: 429
• Name: LAMBDA ANDUR
• Manufacturer: DLP