Lisainfo: (AM)

• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 15.5
• Thickness [mm]: 1.5
• Material: Aluminium
• Shape: A Shape
• DIN/ISO: 7603
• Alternative Repair Kit: 505.550, 505.540
• Manufacturer: ELRING

• Required quantity: 6
• Electrode Gap [mm]: 0.8
• Tightening Torque [Nm]: 28
• Thread Size: M 14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 20,8
• Spark Position [mm]: 3
• Number of pins: 1
• Manufacturer: BOSCH
• Name: BS 0242235663

• Engine Code: M30 B28 (28EK0)
• Required quantity: 6
• for OE number: 7700500048
• Connector type: Removable SAE
• Diameter [mm]: 14
• Spanner Size: 20.6
• Tightening Torque [Nm]: 22
• Weight [g]: 56
• Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
• Thread Length [mm]: 19
• Gross Weight [g]: 59
• Manufacturer: DENSO
• Name: DN W16EPRU

• Electrode Gap [mm]: 0.7
• Thread Size: M14 x 1,25
• Spanner Size: 21
• Spark Plug: 1 - Earthed Electrode
• Thread Length [mm]: 19
• Weight [kg]: 0.056
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Electrode Gap [mm]: 0.7
• Length [mm]: 126
• Weight [kg]: 0.061
• Spark Plug: 1 - Earthed Electrode
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: M30 B28 (28EK0)
• Required quantity: 6
• for OE number: 1WT118110
• Connector type: Crimped SAE
• Diameter [mm]: 14
• Spanner Size: 20.6
• Tightening Torque [Nm]: 22
• Weight [g]: 58
• Country Specific Design: Japan
• Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
• Thread Length [mm]: 19
• Gross Weight [g]: 61
• Manufacturer: DENSO
• Name: DN W16TT
• Lisainfo: W16TT DENSO
• Additional information: W16TT DENSO

• Required quantity: 6
• Electrode Gap [mm]: 0.9
• Connector type: M4/SAE
• Thread Size: M14x1.25
• Spanner Size: 21 mm
• Quality/ Grade: Nickel GE
• Packing Type: Box
• Thread Length [mm]: 19
• Technical Information Number: RN9YC
• Spark Position [mm]: 3
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Packaging length [cm]: 8.85
• Packaging width [cm]: 2.6
• Packaging height [cm]: 2.35
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 9
• Projection [mm]: 1.5
• Name: CH OE006/T10
• Manufacturer: CHAMPION

Spark Plug: 1 - Earthed Electrode, with gasket seat, Copper Centre Electrode

• Filter type: Filter Insert
• Outer Diameter [mm]: 82
• Inner Diameter [mm]: 27
• Inner Diameter 1 [mm]: 27
• Height [mm]: 129
• Name: MU FOP276
• Manufacturer: MULLER FILTER

• Fitting Position: Driver side
• Matching Adapter: U-hook
• for OE number: 8250A186
• Length [mm]: 450
• Length [inch]: 18
• Weight [g]: 110
• Wiper blade type: Bracket wiper blade
• Gross Weight [g]: 146
• Manufacturer: DENSO
• Name: DN DM-045

• Filter type: Filter Insert
• Height [mm]: 128.5
• Outer Diameter [mm]: 82
• Inner Diameter 1 [mm]: 28
• Inner Diameter 2 [mm]: 28
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Filter type: Filter Insert
• Outer Diameter [mm]: 82
• Inner Diameter [mm]: 28
• Height [mm]: 127
• Name: Oil filter
• Quality class: PJ

Lisainfo: "Tootja: COOPERSFIAAM FILTERS
7 (E23), 05.77-08.86
(kvaliteediklass: PJ)" Additional information: "Tootja: COOPERSFIAAM FILTERS
7 (E23), 05.77-08.86
(kvaliteediklass: PJ)"

• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with seal
• Height [mm]: 129
• Inner Diameter [mm]: 28
• Outer Diameter [mm]: 81
• Inner Diameter 1 [mm]: 28
• SVHC: No SVHC present!
• Manufacturer: MANN FILTRY

• Filter type: Filter Insert
• Length [mm]: 323
• Width [mm]: 183
• Height [mm]: 40
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Engine Code: M30 B28 (28EK0)
• Required quantity: 6
• Fuel Type: CNG/LPG
• Connector type: Solid SAE
• Diameter [mm]: 14
• Spanner Size: 20.6
• Tightening Torque [Nm]: 22
• Weight [g]: 58
• Country Specific Design: Japan
• Spark Plug: 1 - Earthed Electrode, Platinum Middle Electrode
• Thread Length [mm]: 19
• Gross Weight [g]: 61
• Manufacturer: DENSO
• Name: DN IW16TT
• Quality class: Q

Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Fitting Position: Front
• Quantity Unit: Kit
• Length 1 [mm]: 450
• Length 2 [mm]: 450
• Wiper blade type: Bracket wiper blade without spoiler
• Manufacturer: BOSCH
• Name: BS 3397118505

• Fitting Position: Passenger Side
• Matching Adapter: U-hook
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• not for country specific design: Great Britain
• for OE number: 76630TM8A01
• Length [mm]: 450
• Length [inch]: 18
• Weight [g]: 142
• Wiper blade type: Hybrid Wiper Blade
• Gross Weight [g]: 177
• Manufacturer: DENSO
• Additional information: DUR-045L DEN
• Lisainfo: DUR-045L DEN

• Fitting Position: Passenger Side
• Matching Adapter: U-hook
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Country Specific Design: Great Britain
• for OE number: 76632TM8A21
• Length [mm]: 450
• Length [inch]: 18
• Weight [g]: 142
• Wiper blade type: Hybrid Wiper Blade
• Gross Weight [g]: 177
• Manufacturer: DENSO

• Filter type: Filter Insert
• Length [mm]: 320
• Width [mm]: 183
• Height [mm]: 39
• Seal Material: Foam/Rigid Foam
• Packaging length [cm]: 18.8
• Packaging height [cm]: 32.5
• Net Weight [g]: 328
• Packaging width [cm]: 4.2
• Manufacturer: KNECHT
• Name: KN LX36

• Fitting Position: Front
• Quantity Unit: Kit
• Styling: with spoiler
• Length 1 [mm]: 450
• Length 2 [mm]: 450
• Wiper blade type: Bracket wiper blade with spoiler
• Manufacturer: BOSCH
• Name: BS 3397118506

• Filter type: Filter Insert
• Length [mm]: 320
• Width [mm]: 183
• Height [mm]: 38
• SVHC: No SVHC present!
• Manufacturer: MANN FILTRY

• Required quantity: 6
• Alternatively:
• Electrode Gap [mm]: 0.8
• Connector type: SAE
• Thread Size: M14x1.25
• Spanner Size: 21 mm
• Quality/ Grade: Pt GE
• Packing Type: Box
• Thread Length [mm]: 19
• Technical Information Number: RN8WYPB3
• Spark Position [mm]: 3
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Packaging length [cm]: 10
• Packaging width [cm]: 2.5
• Packaging height [cm]: 2.5
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 10
• Projection [mm]: 1.5
• Name: CH CCH9804
• Manufacturer: CHAMPION

Spark Plug: 1 - Earthed Electrode, with gasket seat, Iridium Middle Electrode

• Vehicle Equipment: for vehicles with power steering
• Diameter [mm]: 12
• Filter type: In-Line Filter
• Supplementary Article/Info 2: Magnetic
• Lisainfo: Hydraulic Filter, steering system
• Additional information: Hydraulic Filter, steering system

• Vehicle Equipment: for vehicles with power steering
• Diameter [mm]: 10
• Filter type: In-Line Filter
• Supplementary Article/Info 2: Magnetic
• Lisainfo: Hydraulic Filter, steering system
• Additional information: Hydraulic Filter, steering system