• Elektroodide vahe (mm): 0,7
• Pikkus (mm): 126
• Kaal (kg): 0,06
• Süüteküünal: 1-massielektrood
• Versioon: E7EC1
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Elektroodide vahe (mm): 0,7
• Pikkus (mm): 126
• Kõrgus (mm): 51
• Kaal (kg): 0,062
• Süüteküünal: 1-massielektrood
• Versioon: VR7EC1
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: 20 T4H
• Required quantity: 4
• Quantity per packing unit: 10
• OE-numbri jaoks: 5960.F0
• Ühendustehnika: Solid SAE
• Läbimõõt [mm]: 14
• Võtmekaugus: 16
• Väändejõud [Nm]: 22
• Kaal (g): 43
• Süüteküünal: 1-massielektrood, Niklist keskelektrood
• Keermepikkus (mm): 19
• Brutokaal [g]: 46
• alternatiivne toode: K20TT
• Manufacturer: DENSO
• Name: DN K20PRU

• Engine Code: T16
• Required quantity: 4
• Elektroodide vahe (mm): 0,9
• Väändejõud [Nm]: 28
• Keermemõõt: M 14 x 1,25
• Keermepikkus (mm): 19
• Võtmekaugus: 16
• Sädemeasetus (mm): 3
• Pistikkontaktide arv: 1
• Manufacturer: BOSCH
• Name: BS 0242235666

• Engine Code: T16
• Fuel Type: CNG/LPG
• Supplementary Article/Info 2: Electrode gap must be set for operation on gas
• Replace after km: 15,000
• Required quantity: 4
• Elektroodide vahe (mm): 0,8
• Väändejõud [Nm]: 28
• Keermemõõt: M 14 x 1,25
• Keermepikkus (mm): 19
• Võtmekaugus: 16
• Sädemeasetus (mm): 3
• Pistikkontaktide arv: 1
• Manufacturer: BOSCH
• Name: BS 0242240593
• Lisainfo: 0242240593 BOSCH
• Additional information: 0242240593 BOSCH

• Electrode Gap [mm]: 0.8
• Võtmekaugus: 16 mm
• Keermemõõt: M14 x 1,25
• Keermepikkus (mm): 19
• Sädemeasetus (mm): 3
• Name: NG BKR6E
• Manufacturer: NGK
• Additional information: BKR6E
• Lisainfo: BKR6E

Süüteküünal: Niklist keskelektrood, 1-massielektrood, veakõrvaldused, 5 koom, koos lametihendikohaga, püsiv SAE-ühendus

• Engine Code: 20 T4H
• Required quantity: 4
• Quantity per packing unit: 4
• OE-numbri jaoks: 1WT318110
• Ühendustehnika: Solid SAE
• Läbimõõt [mm]: 14
• Võtmekaugus: 16
• Väändejõud [Nm]: 22
• Kaal (g): 43
• Süüteküünal: 1-massielektrood, Niklist keskelektrood
• Keermepikkus (mm): 19
• Brutokaal [g]: 46
• alternatiivne toode: IK20
• Manufacturer: DENSO
• Name: DN K20TT
• Lisainfo: K20TT DENSO
• Additional information: K20TT DENSO

• Required quantity: 4
• Quantity per packing unit: 10
• Electrode Gap [mm]: 0.9
• Connector type: SAE
• Thread Size: M14x1,25
• Spanner Size: 16 mm
• Spark Plug: 1 - Earthed Electrode, with gasket seat
• Thread Length [mm]: 19
• Technical Information Number: 14 FR-7 DUW
• Self-service suited packaging see parts list:
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Manufacturer: BERU BY DRIV

• Required quantity: 4
• Quantity per packing unit: 10
• Electrode Gap [mm]: 0.9
• Connector type: M4/SAE
• Thread Size: M14x1.25
• Spanner Size: 16 mm
• Quality/ Grade: Cu-core GE
• Packing Type: Box
• Thread Length [mm]: 19
• Technical Information Number: RC9YCC
• Spark Position [mm]: 3
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Packaging length [cm]: 8.85
• Packaging width [cm]: 2.6
• Packaging height [cm]: 2.35
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 9
• Projection [mm]: 1.5
• Manufacturer: CHAMPION

Spark Plug: 1 - Earthed Electrode, with gasket seat, Copper Centre Electrode

• Required quantity: 4
• Quantity per packing unit: 10
• Electrode Gap [mm]: 0.9
• Connector type: M4/SAE
• Thread Size: M14x1,25
• Spanner Size: 16 mm
• Spark Plug: 1 - Earthed Electrode, with gasket seat
• Thread Length [mm]: 19
• Technical Information Number: 14 FR-7 DU2
• Self-service suited packaging see parts list:
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Manufacturer: BERU BY DRIV

• Required quantity: 4
• Alternatively:
• Quantity per packing unit: 10
• Electrode Gap [mm]: 0.9
• Connector type: SAE
• Thread Size: M14x1,25
• Spanner Size: 16 mm
• Quality/ Grade: Poly-V Tit
• Spark Plug: 1 - Earthed Electrode, with gasket seat
• Thread Length [mm]: 19
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 10
• Manufacturer: BERU

• Required quantity: 4
• Alternatively:
• Quantity per packing unit: 4
• Electrode Gap [mm]: 1
• Connector type: SAE
• Thread Size: M14x1.25
• Spanner Size: 16 mm
• Quality/ Grade: Pt GE
• Packing Type: Box
• Thread Length [mm]: 19
• Technical Information Number: RC11WYPB4
• Spark Position [mm]: 3
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Packaging length [cm]: 8.382
• Packaging width [cm]: 2
• Packaging height [cm]: 2.032
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 10
• Projection [mm]: 1.5
• Name: CH CCH9003
• Manufacturer: CHAMPION

Spark Plug: 1 - Earthed Electrode, with gasket seat, Iridium Middle Electrode

• Engine Code: T16
• Required quantity: 4
• Hulgaühik: Komplekt
• Elektroodide vahe (mm): 0,9
• Väändejõud [Nm]: 28
• Keermemõõt: M 14 x 1,25
• Keermepikkus (mm): 19
• Võtmekaugus: 16
• Sädemeasetus (mm): 3
• Pistikkontaktide arv: 1
• Manufacturer: BOSCH
• Name: BS 0242235912

• Väändejõud [Nm]: 25
• Elektroodide vahe (mm): 1
• Keermemõõt: M14 x 1.25
• Võtmekaugus: 16
• Süüteküünal: 1-massielektrood
• Keermepikkus (mm): 19
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Name: HE 8EH188706071
• Manufacturer: HELLA

• Engine Code: T16
• Fuel Type: CNG/LPG
• Replace after km: 30,000
• Required quantity: 4
• Elektroodide vahe (mm): 0,7
• Väändejõud [Nm]: 28
• Keermemõõt: M 14 x 1,25
• Keermepikkus (mm): 19
• Võtmekaugus: 16
• Sädemeasetus (mm): 4
• Pistikkontaktide arv: 1
• Manufacturer: BOSCH
• Name: BS 0242240653

• Engine Code: 20 T4H
• Required quantity: 4
• Fuel Type: CNG/LPG
• Quantity per packing unit: 4
• Ühendustehnika: Solid SAE
• Läbimõõt [mm]: 14
• Võtmekaugus: 16
• Väändejõud [Nm]: 22
• Kaal (g): 43
• Süüteküünal: 1-massielektrood, Plaatinast keskelektrood
• Keermepikkus (mm): 19
• Brutokaal [g]: 46
• alternatiivne toode: IK20TT
• Manufacturer: DENSO
• Name: DN IK20TT
• Lisainfo: IK20TT DENSO
• Additional information: IK20TT DENSO

• Electrode Gap [mm]: 0.8
• Quantity per packing unit: 4
• Võtmekaugus: 16 mm
• Keermemõõt: M14 x 1,25
• Keermepikkus (mm): 19
• Sädemeasetus (mm): 3
• Manufacturer: NGK - NTK

Süüteküünal: Niklist keskelektrood, 1-massielektrood, veakõrvaldused, 5 koom, koos lametihendikohaga, püsiv SAE-ühendus

• Electrode Gap [mm]: 0.8
• Võtmekaugus: 16 mm
• Keermemõõt: M14 x 1,25
• Keermepikkus (mm): 19
• Sädemeasetus (mm): 3
• Name: NG BKR6EIX
• Manufacturer: NGK

Süüteküünal: Iriidiumist keskelektrood, 1-massielektrood, veakõrvaldused, 5 koom, koos lametihendikohaga, püsiv SAE-ühendus

• Electrode Gap [mm]: 0.8
• Võtmekaugus: 16 mm
• Keermemõõt: M14 x 1,25
• Süüteküünal: Iriidiumist keskelektrood, püsiv SAE-ühendus
• Kütuseliik: CNG/LPG
• Soovituslik vahetusintervall (km): 60 000
• Manufacturer: NGK - NTK
• Lisainfo: LPG1
• Additional information: LPG1