• Fabrication Number: ECT-BM-011
• Manufacturer: NTY

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• Spanner Size: 22
• Thread Size: M12x1.5
• for OE number: 13621433076
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Vehicle Identification Number (VIN) to: 471564
• Thread Size: M12x1.5
• Manufacturer: VERNET

• Vehicle Identification Number (VIN) to: 471564
• Connector Shape: rectangular
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S22
• Thread Size: M12*1,5
• Manufacturer: NISSENS
• Name: NI 207088

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Vehicle Identification Number (VIN) from: 471565
• Thread Size: M12x1.5
• Manufacturer: VERNET

• Housing Colour: brown
• Number of pins: 2
• Thread Size: M 12X1.5-6g
• Spanner Size: 0
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: DLP

• Engine Code: 18 K4K
• Housing Colour: black
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 22
• Manufacturer: DELPHI
• Name: DE TS10270

• Engine Code: 18 K4K
• Sensor Type: NTC Sensor
• Thread Size: M12x1,5
• Spanner Size: 22
• Colour: black
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: brown
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: LHE1600AA
• Manufacturer: NRF

• Engine Code: 18 K4K
• Thread Size: M12x1,5
• Spanner Size: 22
• Manufacturer: FACET

• Engine Code: 18 K4K
• Thread Size: M12x1,5
• Spanner Size: 22
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Number of pins: 2
• Colour: black
• Supplementary Article/Supplementary Info: with gasket/seal
• Thread Size: M12x1,5, M 12x1,5
• Spanner Size: 22
• Connector Shape: angular
• Fitting Position: Cylinder Head
• Version: IAM
• Power [W]: 0.06
• Manufacturer: METZGER

• Vehicle Identification Number (VIN) from: YD471565
• Housing Colour: black
• Number of pins: 2
• Thread Size: M 12x1,5
• Manufacturer: FAE

• Engine Code: 18 K4K
• Housing Colour: brown
• Thread Size: M12x1,5
• Spanner Size: 19
• Manufacturer: FACET

• Engine Code: 18 K4K
• Housing Colour: brown
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Number of pins: 2
• for OE number: MEK100060
• Weight [kg]: 0.033
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) to: YD471564
• Housing Colour: brown
• Number of pins: 2
• Thread Size: M 12x1,5
• Manufacturer: FAE

• Thread Size: M12x1.5
• Manufacturer: VERNET

• Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of pins: 2
• Manufacturer: ERA

• Fabrication Number: ECM-LR-000
• Manufacturer: NTY
• Name: NTY ECM-LR-000

• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Vehicle Identification Number (VIN) to: YD471564
• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE SS11174

• Brake Type: Disc Brake
• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-RV-002
• Manufacturer: NTY

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Manufacturer: AUTO-GH

• Construction Year from: 03.1996
• Construction Year to: 06.1999
• Mounting Type: Bolted
• Voltage [V]: 12
• Thread Size: M12x1,5
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Number of pins: 2
• Corresponds to the original part in colour: brown
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 4
• for OE number: 0872648
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 740
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE SS20267

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Number of pins: 2
• Thread Size: M10x1,25
• Power [W]: 0.06
• Manufacturer: METZGER

• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Connector/Clamp: Connector may need adjustment
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-UV-000
• Manufacturer: NTY

• Brake Type: Disc Brake
• Required quantity: 1
• Fitting Position: Rear Axle Right
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Fitting Position: Front Axle Left
• Cable Length [mm]: 970
• Number of pins: 2
• Fitting Depth [mm]: 28
• Manufacturer: ERA

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Housing Colour: white
• Manufacturer: FAE

• Vehicle Identification Number (VIN) from: YD471565
• Number of pins: 4
• Pressure from [kPA]: 15
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: DLP

• Fitting Position: Front Axle Left
• Overall Length [mm]: 1,040
• Length [mm]: 28
• Sensor Type: Passive sensor
• Socket colour: white
• Cable Length [mm]: 960
• paired article number: 30463
• Weight [kg]: 0.19
• Manufacturer: A.B.S.

• Fitting Position: Front Axle Right
• Overall Length [mm]: 1,040
• Length [mm]: 28
• Sensor Type: Passive sensor
• Socket colour: white
• Cable Length [mm]: 960
• paired article number: 30460
• Weight [kg]: 0.19
• Manufacturer: A.B.S.

• Number of pins: 3
• Name: DE SS11093
• Manufacturer: DELPHI

• Construction Year from: 10.1996
• Construction Year to: 11.1999
• Engine Code: 18K16
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Resistor [Ohm]: 1,300
• Name: ANDUR, VŽNTVOLL
• Manufacturer: VAL

• Construction Year from: 03.1996
• Construction Year to: 06.1999
• Voltage [V]: 12
• Resistor [Ohm]: 1,300
• Manufacturer Restriction: LUCAS
• Number of pins: 2
• Sensor Type: Impulse Sensor
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, VŽNTVOLL
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Oxygen Sensor: Regulating Probe, Heated
• Vehicle Identification Number (VIN) to: YD471564
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Number of pins: 3
• Fitting Depth [mm]: 27.5
• Manufacturer: ERA

• Number of connectors: 4
• Colour: black
• Weight [kg]: 0.02
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Oxygen Sensor
• Length [mm]: 972
• Number of circuits: 4
• Manufacturer: FAST

• Oxygen Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) to: 471564
• Cable Length [mm]: 605
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Construction Year to: 11.1999
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 100
• Gross Weight [g]: 149
• Manufacturer: DENSO
• Name: DN DOX-0120
• Quality class: Q

Oxygen Sensor: Regulating Probe, Heated, Finger probe, Oxygen Sensor Additional information: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
164 (164), 01.87-09.
(kvaliteediklass: Q)"

• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Length [mm]: 605
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV578
• Manufacturer: ESEN SKV

• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) to: YD 471564
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Oxygen Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) from: 471565
• Cable Length [mm]: 540
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Oxygen Sensor: Regulating Probe, Finger probe, Heated
• Vehicle Identification Number (VIN) to: YD471564
• Engine Code: 18 K4K
• Cable Length [mm]: 317
• Manufacturer: DELPHI

• Construction Year from: 10.1996
• Construction Year to: 11.1999
• Transmission Type: Manual Transmission
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Length [mm]: 605
• Number of circuits: 4
• Manufacturer: VDO

• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) to: YD 471564
• Number of circuits: 4
• Overall Length [mm]: 623
• Available as universal article as well, see article no.: 0258986506
• Recommended change interval [km]: 100,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Vehicle Identification Number (VIN) to: 471564
• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring