• Engine Code: KV 6
• Võtmekaugus: 24
• Pistikkontaktide arv: 1
• Manufacturer: KAVO

• Engine Code: KV 6
• Surve (bar): 0,3
• Keermemõõt: M12x1,5
• Võtmekaugus: 24
• Name: EP 1.800.071
• Manufacturer: EPS

• Seerianumber: ECT-BM-011
• Manufacturer: NTY

• Engine Code: KV 6
• Surve (bar): 0,3
• Keermemõõt: M12x1,5
• Võtmekaugus: 24
• Manufacturer: FACET

• Keermemõõt: M 12x1,5
• Pistikkontaktide arv: 1
• Korpusevärv: pruun
• Manufacturer: FAE

• Surve (bar): 5
• Korpusevärv: pruun
• Keermemõõt: M12×1.5?6g
• Läbimõõt [mm]: 24
• Võtmekaugus: 24
• Pistikkontaktide arv: 1
• Manufacturer: DELPHI
• Name: oil pressure sensor
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Anduritüüp: NTC-andur
• Montaaživiis: kruvitud
• Pistikukatte kuju: ristkülik
• Pistikkontaktide arv: 2
• Pistiku värv: must
• Võtmekaugus: 22
• Keermemõõt: M12x1.5
• OE-numbri jaoks: 13621433076
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: NRF

• Keermemõõt: M12x1,5
• Värv: pruun
• Kaal (kg): 0,043
• Manufacturer: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Keermemõõt: M 12 x 1,5
• Surve (bar): 0,3
• OE-numbri jaoks: NUC100350
• Manufacturer: MEAT&DORIA

• Keermemõõt: M12x1.5
• Manufacturer: VERNET

• Korpusevärv: pruun
• Pistikkontaktide arv: 2
• Keermemõõt: M 12X1.5-6g
• Võtmekaugus: 0
• Manufacturer: DELPHI
• Name: DE TS10242-12B1

• Surve (bar): 0,35
• Keermemõõt: M12 x 1,5
• Pistikkontaktide arv: 1
• tehnilise informatsiooni number: circuit N.C.
• Manufacturer: ERA

• Lülitusrõhk [bar]: 0,3
• Keermemõõt: M12x1.5
• Anduritüüp: kinnine anduri ehitusviis
• Manufacturer: VERNET

• for model code: 2 Pin
• Korpusevärv: must
• Pistikkontaktide arv: 2
• Keermemõõt: M12X1.5-6g
• Võtmekaugus: 22
• Manufacturer: DELPHI
• Name: DE TS10270

• Anduritüüp: NTC-andur
• Montaaživiis: kruvitud
• Pistikukatte kuju: ristkülik
• Pistikkontaktide arv: 2
• Pistiku värv: pruun
• Võtmekaugus: 19
• Keermemõõt: M12x1.5
• OE-numbri jaoks: LHE1600AA
• Manufacturer: NRF

• Engine Code: KV 6
• Keermemõõt: M12x1,5
• Võtmekaugus: 22
• Name: EP 1.830.272
• Manufacturer: EPS

• Engine Code: KV 6
• Keermemõõt: M12x1,5
• Võtmekaugus: 22
• Manufacturer: FACET

• Korpusevärv: must
• Pistikkontaktide arv: 2
• Keermemõõt: M 12x1,5
• Manufacturer: FAE

• Keermemõõt: M12 x 1,5
• Võtmekaugus: 22
• Pistikkontaktide arv: 2
• Manufacturer: ERA

• Pistikkontaktide arv: 2
• OE-numbri jaoks: MEK100060
• Kaal (kg): 0,033
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 3
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Keermemõõt: M12 x 1,5
• Võtmekaugus: 19
• Pistikkontaktide arv: 2
• Manufacturer: ERA

• Pistikkontaktide arv: 2
• Manufacturer: DELPHI
• Name: DE SS11174

• Vehicle Identification Number (VIN) from: 152063
• Required quantity: 1
• Pinge [V]: 12
• Pistikkontaktide arv: 3
• Anduritüüp: Hallsensor
• Piirangutega toode/piirangu info 2: ilma kaablita
• Korpusevärv: must
• Manufacturer: BREMI

• Lambda andur: Diagnoosisond, Keere eelmääritud
• Seerianumber: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Lambda andur: Sond
• Seerianumber: ESL-BM-023
• Kaablipikkus (mm): 650
• Manufacturer: NTY

• Engine Code: 25KV6,25KV6F
• Pistikkontaktide arv: 3
• Ühenduste arv: 3
• Piirangutega toode/piirangu info 2: väntvõlli jaoks, ilma kaablita
• Värv: must
• Anduritüüp: Hallsensor, Aktiivne andur
• Piirangutega toode/piirangu info: koos hoidjaga
• Nominaalpinge (V): 12
• Installatsiooni sügavus (mm): 33
• Pistikukatte kuju: D-kuju
• Kinnitusaukude hulk: 1
• Kinnitusnurk (kraad): 90
• Kaal (kg): 0,04
• Manufacturer: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pistikkontaktide arv: 3
• Pistikukatte kuju: ovaalne
• Piirangutega toode/piirangu info 2: ilma kaablita
• Kinnitusaukude hulk: 1
• Anduritüüp: Hallsensor
• Installatsiooni sügavus (mm): 28
• OE-numbri jaoks: NSC100932
• Manufacturer: MEAT&DORIA

• tehnilise informatsiooni number: Universal
• pikkus üle kõige (mm): 325
• Pistikkontaktide arv: 4
• Lambda andur: Sond
• Manufacturer: ASHIKA
• Lisainfo: 43-U04
• Additional information: 43-U04

• Pinge [V]: 12
• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 3
• Piirangutega toode/piirangu info 2: ilma kaablita
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: HELLA
• Name: HE 6PU012680011

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• tehnilise informatsiooni number: Universal
• pikkus üle kõige (mm): 325
• Pistikkontaktide arv: 4
• Lambda andur: Sond
• Manufacturer: JAPKO

• Lambda andur: Bistabiilne andur
• Garantii: 3 aastat garantii
• Kaal (kg): 0,12
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV121

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,14
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV904
• Manufacturer: ESEN SKV

• Fitting Position: Left
• Oxygen Sensor: Regulating Probe
• Exhaust System: for pre-catalytic converter
• Kvaliteet: OE
• Tootja piirang: DENSO
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 750
• Pistikkontaktide arv: 4
• Kaal (g): 103
• Lambda andur: soojendatud, Sõrmesensor, Bistabiilne andur
• Brutokaal [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0119
• Quality class: Q

Additional information: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)"

• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 3
• Pinge [V]: 12
• Pistikukatte kuju: D-kuju
• Piirangutega toode/piirangu info 2: ilma kaablita
• Kaal (kg): 0,04
• Manufacturer: VALEO

• Pistikkontaktide arv: 3
• Installatsiooni sügavus (mm): 27,5
• Manufacturer: ERA

• Oxygen Sensor: Diagnostic Probe, Regulating Probe
• Engine Code: KV 6, KV6
• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Pikkus (mm): 650
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,14
• Takistus [oom]: 6
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV686
• Manufacturer: ESEN SKV

• Engine Code: KV 6
• Vehicle Identification Number (VIN) to: YM152062
• Transmission Type: Manual Transmission
• Manufacturer: FACET

• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Keermemõõt: M18 x 1,5
• Ühendushulk: 4
• Pistikukatte kuju: D-kuju
• Pikkus (mm): 650
• Lambda andur: Sond, Keere eelmääritud
• Väljalaskesüsteem: katalüsaatori ees
• Kaal (kg): 0,148
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda andur: soojendatud
• Pikkus (mm): 620
• tehnilise informatsiooni number: Universal 77004
• Manufacturer: FAE

• Lambda andur: Sond, soojendatud
• Pinge [V]: 12
• Ühendushulk: 1
• Kaablipikkus (mm): 650
• Manufacturer: PIERBURG

• Anduritüüp: Hallsensor
• Montaaživiis: Kruviühendus
• Kuju: ovaalne
• Ühenduste arv: 3
• Piirangutega toode/piirangu info 2: koos rõngastihendiga