• for OE number: MHK101086
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 770
• Number of pins: 4
• Weight [g]: 116
• Supplementary Article/Info 2: with rubber grommet
• Gross Weight [g]: 149
• Manufacturer: DENSO

Oxygen Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor Additional information: "Tootja: DENSO
25 (RF), 09.99-05.05
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
25 (RF), 09.99-05.05
(kvaliteediklass: Q)"

• Switch point from [bar]: 0.2
• Length [mm]: 41
• Switch point to [bar]: 0.5
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 12
• Spanner Size: 24
• Number of connectors: 1
• Colour Coding: black
• Connector Shape: angular
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M 12x1,5
• Number of pins: 1
• Housing Colour: brown
• Manufacturer: FAE

• Length [mm]: 41
• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 12
• Spanner Size: 24
• Number of connectors: 1
• Colour Coding: black
• Connector Shape: angular
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Name: SW 20 23 0002
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 41
• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• External Thread Size: M12 x 1,5
• Thread Length [mm]: 12
• Spanner Size: 24
• Number of connectors: 1
• Colour Coding: black
• Connector Shape: angular
• Weight [kg]: 0.034
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• Spanner Size: 22
• Thread Size: M12x1.5
• for OE number: 13621433076
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Vehicle Identification Number (VIN) from: 491017
• Connector Shape: rectangular
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S22
• Thread Size: M12*1,5
• Manufacturer: NISSENS
• Name: NI 207088

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Vehicle Identification Number (VIN) from: 491017
• Housing Colour: brown
• Number of pins: 2
• Thread Size: M 12X1.5-6g
• Spanner Size: 0
• Manufacturer: DELPHI
• Name: DE TS10242-12B1

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: brown
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: LHE1600AA
• Manufacturer: NRF

• Engine Code: 20 K4F
• Thread Size: M12x1,5
• Spanner Size: 22
• Manufacturer: FACET

• Engine Code: 20 K4F
• Thread Size: M12x1,5
• Spanner Size: 22
• Name: EP 1.830.272
• Manufacturer: EPS

• Engine Code: 20 K4F
• Vehicle Identification Number (VIN) from: 491017
• Thread Size: M12x1,5
• Spanner Size: 19
• Manufacturer: FACET

• Engine Code: 20 K4F
• Vehicle Identification Number (VIN) from: 491017
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: EP 1.830.248
• Manufacturer: EPS

• Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of pins: 2
• Manufacturer: ERA

• Sensor Type: Hall Sensor
• Number of pins: 3
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE SS11174

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Oxygen Sensor: Regulating Probe
• Fabrication Number: ESL-BM-023
• Cable Length [mm]: 650
• Manufacturer: NTY

• Oxygen Sensor: Regulating Probe
• Number of circuits: 4
• Manufacturer: KAMOKA

• Oxygen Sensor: Diagnostic Probe
• Fabrication Number: ESL-SK-004
• Cable Length [mm]: 545

• Colour: black
• Number of pins: 3
• Fitting Depth [mm]: 33
• Weight [kg]: 0.03
• Manufacturer: ERA

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Oxygen Sensor: Regulating Probe
• Manufacturer: ASHIKA
• Lisainfo: 43-U04
• Additional information: 43-U04

• Technical Information Number: Universal
• Overall Length [mm]: 325
• Number of pins: 4
• Oxygen Sensor: Regulating Probe
• Manufacturer: JAPKO

• Vehicle Identification Number (VIN) from: 476900
• Voltage [V]: 12
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU012680011
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Oxygen Sensor: Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.12
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV121
• Manufacturer: ESEN SKV

• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.14
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV904
• Manufacturer: ESEN SKV

• Fitting Position: Left
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0119
• Quality class: Q

Oxygen Sensor: Regulating Probe, Heated, Finger probe, Oxygen Sensor Additional information: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)"

• Vehicle Identification Number (VIN) from: 476900
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• Name: VA 254062
• Manufacturer: VALEO

• Number of pins: 3
• Fitting Depth [mm]: 27.5
• Manufacturer: ERA

• Transmission Type: Manual Transmission
• Oxygen Sensor: Regulating Probe, Planar probe, Heated
• Vehicle Equipment: for vehicles with air conditioning
• Engine Code: 20 K4F
• Cable Length [mm]: 440
• Name: DE ES20235-12B1
• Manufacturer: DELPHI

• Oxygen Sensor: Heated, Regulating Probe
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 400
• Weight [kg]: 0.088
• Name: SW 33 10 4148
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: 20 K4F
• Vehicle Identification Number (VIN) from: 476900
• Manufacturer: FACET

• Oxygen Sensor: Regulating Probe, Oxygen Sensor
• Engine Code: 20 K4F
• Voltage [V]: 12
• Length [mm]: 650
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.14
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV686
• Manufacturer: ESEN SKV

• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Oxygen Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Oxygen Sensor: Heated
• Length [mm]: 620
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Transmission Type: Manual Transmission
• Vehicle Equipment: for vehicles with air conditioning
• Number of circuits: 4
• Overall Length [mm]: 423
• Available as universal article as well, see article no.: 0258986506
• Recommended change interval [km]: 100,000
• Manufacturer: BOSCH

• Oxygen Sensor: Regulating Probe, Heated
• Voltage [V]: 12
• Conductor Number: 1
• Cable Length [mm]: 650
• Manufacturer: PIERBURG

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring