• Exhaust System: for pre-catalytic converter
• for OE number: MHK100840
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 620
• Number of pins: 4
• Weight [g]: 105
• Gross Weight [g]: 138
• Manufacturer: DENSO
• Name: DN DOX-2017

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor Additional information: "Tootja: DENSO
FREELANDER (LN), 02.
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
FREELANDER (LN), 02.
(kvaliteediklass: Q)"

• for OE number: MHK101086
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 770
• Number of pins: 4
• Weight [g]: 116
• Supplementary Article/Info 2: with rubber grommet
• Gross Weight [g]: 149
• Manufacturer: DENSO

Oxygen Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor Additional information: "Tootja: DENSO
25 (RF), 09.99-05.05
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
25 (RF), 09.99-05.05
(kvaliteediklass: Q)"

• Engine Code: 14 K4F
• Spanner Size: 24
• Number of pins: 1
• Manufacturer: KAVO PARTS

• Engine Code: 14 K4F
• Colour: brown
• Pressure [bar]: 0.3
• Thread Size: M12x1,5
• Spanner Size: 24
• Manufacturer: FACET

• Fabrication Number: ECT-BM-011
• Manufacturer: NTY

• Engine Code: 14 K4F
• Colour: brown
• Pressure [bar]: 0.3
• Thread Size: M12x1,5
• Spanner Size: 24
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Thread Size: M 12x1,5
• Number of pins: 1
• Housing Colour: brown
• Manufacturer: FAE

• Colour: brown
• Pressure [bar]: 5
• Housing Colour: brown
• Thread Size: M12×1.5?6g
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Manufacturer: DELPHI
• Name: DE SW90027

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• Spanner Size: 22
• Thread Size: M12x1.5
• for OE number: 13621433076
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Engine Code: 14 K4F
• Thread Size: M12x1.5
• Manufacturer: VERNET

• Engine Code: 14 K4F
• Pressure [bar]: 0.3
• Thread Size: 1/8-27NPT
• Spanner Size: 24
• Manufacturer: FACET

• Engine Code: 14 K4F
• Pressure [bar]: 0.3
• Thread Size: 1/8-27NPT
• Spanner Size: 24
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Thread Size: M12x1,5
• Colour: brown
• Weight [kg]: 0.043
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Connector Shape: rectangular
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S22
• Thread Size: M12*1,5
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Thread Size: M12x1.5
• Manufacturer: VERNET

• Housing Colour: brown
• Number of pins: 2
• Thread Size: M 12X1.5-6g
• Spanner Size: 0
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: DLP

• Pressure [bar]: 0.35
• Thread Size: M12 x 1,5
• Number of pins: 1
• Technical Information Number: circuit N.C.
• Manufacturer: ERA

• Switch Pressure [bar]: 0.3
• Thread Size: M12x1.5
• Sensor Type: Closed-type Sensor
• Manufacturer: VERNET

• Engine Code: 14 K4F
• Housing Colour: black
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 22
• Manufacturer: DELPHI
• Name: DE TS10270

• Engine Code: 14 K4F
• Vehicle Identification Number (VIN) from: 471565
• Sensor Type: NTC Sensor
• Thread Size: M12x1,5
• Spanner Size: 22
• Colour: black
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Switch Pressure [bar]: 0.35
• Thread Size: 1/8x27 NPTF
• Sensor Type: Closed-type Sensor
• Name: OLISURVELšLITUS
• Manufacturer: VER

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: brown
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: LHE1600AA
• Manufacturer: NRF

• Engine Code: 14 K4F
• Vehicle Identification Number (VIN) from: 471565
• Thread Size: M12x1,5
• Spanner Size: 22
• Manufacturer: FACET

• Engine Code: 14 K4F
• Vehicle Identification Number (VIN) from: 471565
• Thread Size: M12x1,5
• Spanner Size: 22
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Housing Colour: black
• Number of pins: 2
• Thread Size: M 12x1,5
• Manufacturer: FAE

• Engine Code: 14 K4F
• Vehicle Identification Number (VIN) to: 471564
• Thread Size: M12x1,5
• Spanner Size: 19
• Manufacturer: FACET

• Engine Code: 14 K4F
• Vehicle Identification Number (VIN) to: 471564
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Number of pins: 2
• for OE number: MEK100060
• Weight [kg]: 0.033
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M12x1.5
• Manufacturer: VERNET

• Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of pins: 2
• Manufacturer: ERA

• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE SS11174

• Vehicle Identification Number (VIN) to: 471564
• Mounting Type: Bolted
• Voltage [V]: 12
• Thread Size: M12x1,5
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Number of pins: 2
• Corresponds to the original part in colour: brown
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Number of pins: 2
• Thread Size: M10x1,25
• Power [W]: 0.06
• Manufacturer: METZGER

• Oxygen Sensor: Regulating Probe
• Number of circuits: 4
• Manufacturer: KAMOKA

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Housing Colour: white
• Manufacturer: FAE

• Oxygen Sensor: Diagnostic Probe
• Fabrication Number: ESL-FR-011
• Cable Length [mm]: 525
• Manufacturer: NTY

• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11093

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Resistor [Ohm]: 1,300
• Name: ANDUR, VŽNTVOLL
• Manufacturer: VAL

• Voltage [V]: 12
• Resistor [Ohm]: 1,300
• Manufacturer Restriction: LUCAS
• Number of pins: 2
• Sensor Type: Impulse Sensor
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, VŽNTVOLL
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: 14 K4F
• Number of pins: 3
• Fitting Depth [mm]: 27.5
• Manufacturer: ERA

• Oxygen Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) to: 471564
• Alternatively:
• Cable Length [mm]: 605
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Oxygen Sensor: Oxygen Sensor
• Length [mm]: 972
• Number of circuits: 4
• Manufacturer: FAST

• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Length [mm]: 605
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV578
• Manufacturer: ESEN SKV

• Resistor [Ohm]: 9
• Length [mm]: 568
• Conductor Number: 4
• Number of circuits: 4
• Cable Length [mm]: 568
• Oxygen Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) to: 471564
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Oxygen Sensor: Regulating Probe, Oxygen Sensor
• Exhaust System: before catalytic converter
• Voltage [V]: 12
• Length [mm]: 568
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.14
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV730

• Engine Code: 14 K4F
• Line insulation design: with silicone-coated woven-fibre insulation
• Supplementary Article/Info 2: without plug
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Fitting Position: after catalytic converter
• Manufacturer: VEMO GERMANY

Oxygen Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Diagnostic Probe, Regulating Probe
• Vehicle Identification Number (VIN) from: 471565
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: after catalytic converter, before catalytic converter

• Oxygen Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) from: 471565
• Cable Length [mm]: 540
• Name: DE ES20303-12B1
• Manufacturer: DELPHI

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) to: 471564
• Number of circuits: 4
• Overall Length [mm]: 623
• Available as universal article as well, see article no.: 0258986506
• Recommended change interval [km]: 100,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) from: 471565
• Number of circuits: 4
• Overall Length [mm]: 568
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

• Construction Year from: 09.2003
• Transmission Type: Manual Transmission
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Length [mm]: 620
• Number of circuits: 4
• Manufacturer: VDO

• Version: IAM
• Number of pins: 3
• Rotation Direction: Anticlockwise rotation
• Manufacturer: METZGER
• Lisainfo: 0904044 METZGER
• Additional information: 0904044 METZGER

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring