• Exhaust System: for pre-catalytic converter
• for OE number: MHK100840
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 620
• Number of pins: 4
• Weight [g]: 105
• Gross Weight [g]: 138
• Manufacturer: DENSO
• Name: DN DOX-2017

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor Additional information: "Tootja: DENSO
FREELANDER (LN), 02.
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
FREELANDER (LN), 02.
(kvaliteediklass: Q)"

• for OE number: MHK101086
• Quality: OE
• Manufacturer Restriction: DENSO
• Connector type: with rubber grommet
• Thread Size: M18x1.5
• Cable Length [mm]: 770
• Number of pins: 4
• Weight [g]: 116
• Gross Weight [g]: 149
• Manufacturer: DENSO

Oxygen Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor Additional information: "Tootja: DENSO
25 (RF), 09.99-05.05
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
25 (RF), 09.99-05.05
(kvaliteediklass: Q)"

Fabrication Number: ECT-BM-011

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• Spanner Size: 22
• Thread Size: M12x1.5
• for OE number: 13621433076
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Connector Shape: rectangular
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S22
• Thread Size: M12*1,5
• Name: NI 207088
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Housing Colour: brown
• Number of pins: 2
• Thread Size: M 12X1.5-6g
• Spanner Size: 0
• Manufacturer: DELPHI
• Name: DE TS10242-12B1

• Engine Code: 14 K4F
• Housing Colour: black
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 22
• Manufacturer: DELPHI
• Name: DE TS10270

• Engine Code: 14 K4F
• Vehicle Identification Number (VIN) from: 471565
• Thread Size: M12x1,5
• Spanner Size: 22
• Name: EP 1.830.272
• Manufacturer: EPS

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: brown
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: LHE1600AA
• Manufacturer: NRF

• Engine Code: 14 K4F
• Vehicle Identification Number (VIN) to: 471564
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: EP 1.830.248
• Manufacturer: EPS

• Number of pins: 2
• for OE number: MEK100060
• Weight [kg]: 0.033
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Housing Colour: brown
• Number of pins: 2
• Thread Size: M 12x1,5
• Manufacturer: FAE

• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE SS11174

• Brake Disc Type: Vented
• Brake Type: Disc Brake
• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-RV-002

• Vehicle Identification Number (VIN) to: 471564
• Mounting Type: Bolted
• Voltage [V]: 12
• Thread Size: M12x1,5
• Spanner Size: 19
• Sensor Type: NTC Sensor
• Number of pins: 2
• Corresponds to the original part in colour: brown
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Rear Axle
• Quantity: 2
• Brake Disc Type: Vented
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 740
• Name: DE SS20267
• Manufacturer: DELPHI

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Name: NTY ESL-SK-000
• Manufacturer: NTY

• Number of circuits: 4
• Oxygen Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Number of pins: 4
• Pressure from [kPA]: 15
• Manufacturer: DELPHI
• Name: DE PS10133

• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11093

• Voltage [V]: 12
• Resistor [Ohm]: 1,300
• Manufacturer Restriction: LUCAS
• Number of pins: 2
• Sensor Type: Impulse Sensor
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU009146731
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Front Axle Left
• Overall Length [mm]: 1,040
• Length [mm]: 28
• Sensor Type: Passive sensor
• Socket colour: white
• Cable Length [mm]: 960
• paired article number: 30463
• Weight [kg]: 0.19
• Manufacturer: A.B.S.

• Fitting Position: Front Axle Right
• Overall Length [mm]: 1,040
• Length [mm]: 28
• Sensor Type: Passive sensor
• Socket colour: white
• Cable Length [mm]: 960
• paired article number: 30460
• Weight [kg]: 0.19
• Manufacturer: A.B.S.

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Housing Colour: white
• Manufacturer: FAE

• Engine Code: 14 K4F
• Pressure from [kPA]: 10
• Pressure to [kPA]: 118
• Output Voltage, from [V]: 0.31
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.087
• Manufacturer: EPS

• Oxygen Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) to: 471564
• Cable Length [mm]: 605
• Manufacturer: DELPHI
• Name: DE ES20239-12B1

• Oxygen Sensor: Oxygen Sensor
• Length [mm]: 972
• Number of circuits: 4
• Manufacturer: FAST

• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Length [mm]: 605
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV578
• Manufacturer: ESEN SKV

• Resistor [Ohm]: 9
• Number of circuits: 4
• Length [mm]: 568
• Conductor Number: 4
• Cable Length [mm]: 568
• Oxygen Sensor: Heated
• Manufacturer: MAGNETI MARELLI

• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) to: 471564
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986506

• Oxygen Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) from: 471565
• Cable Length [mm]: 540
• Name: DE ES20303-12B1
• Manufacturer: DELPHI

• Oxygen Sensor: Regulating Probe, Oxygen Sensor
• Exhaust System: before catalytic converter
• Voltage [V]: 12
• Length [mm]: 568
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.14
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV730
• Manufacturer: ESEN SKV

• Oxygen Sensor: Diagnostic Probe, Regulating Probe
• Vehicle Identification Number (VIN) from: 471565
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986615

Fitting Position: after catalytic converter, before catalytic converter

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) to: 471564
• Number of circuits: 4
• Overall Length [mm]: 623
• Available as universal article as well, see article no.: 0258986506
• Recommended change interval [km]: 100,000
• Manufacturer: BOSCH

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Vehicle Identification Number (VIN) from: 471565
• Number of circuits: 4
• Overall Length [mm]: 773
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

• Construction Year from: 09.2003
• Transmission Type: Manual Transmission
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Length [mm]: 620
• Number of circuits: 4
• Manufacturer: VDO

• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) from: 471565
• Number of circuits: 4
• Overall Length [mm]: 568
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring