• Construction Year from: 09.1996
• Fitting Position: Rear Axle
• Brake System: ATE
• Height [mm]: 61.2
• Width [mm]: 62
• Thickness [mm]: 15.8
• Wear Warning Contact: excl. wear warning contact
• Manufacturer: JP GROUP
• Lisainfo: Brake pad set, rear, 15.7 mm
• Additional information: Brake pad set, rear, 15.7 mm

• Construction Year from: 09.1996
• Fitting Position: Front Axle
• Brake System: ATE
• Height 1 [mm]: 74
• Height 2 [mm]: 74
• Width 1 [mm]: 156.3
• Width 2 [mm]: 155.1
• Thickness 1 [mm]: 19.8
• Thickness 2 [mm]: 20.3
• Wear Warning Contact: prepared for wear warning indicator
• Manufacturer: JP GROUP
• Lisainfo: Brake pad set, front, 19.8 mm
• Additional information: Brake pad set, front, 19.8 mm

• Construction Year from: 09.1996
• Brake Type: Disc Brake
• Fitting Position: Front Axle
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Front Axle
• Required quantity: 2
• Construction Year from: 09.1996
• Brake Type: Disc Brake
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 740
• Manufacturer: JP GROUP
• Lisainfo: Sensor, brake lining wear
• Additional information: Sensor, brake lining wear

• Brake Type: Disc Brake
• Fitting Position: Front Axle
• Warning Contact Length [mm]: 720
• Required quantity: 2
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MEY

• Construction Year from: 09.1996
• Required quantity: 2
• Fitting Position: Front Axle, Front Axle Right
• Brake Type: Disc Brake
• Warning Contact Length [mm]: 720
• Weight [kg]: 0.049
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 08.1996
• Fitting Position: Rear Axle
• Width [mm]: 61.7
• Thickness [mm]: 15
• Height [mm]: 57.5
• Brake System: ATE
• Manufacturer: DENCKERMANN ZAWIESZENIE

Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact

• Fitting Position: Rear Axle
• Width [mm]: 62
• Thickness [mm]: 16
• Height [mm]: 61
• Wear Warning Contact: excl. wear warning contact
• Brake System: ATE
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Construction Year to: 08.1996
• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Thickness [mm]: 15.3
• Width [mm]: 61.7
• Height [mm]: 57.5
• Brake System: ATE
• Manufacturer: LPR

• Construction Year from: 09.1996
• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Brake System: ATE
• Thickness [mm]: 15.5
• Width [mm]: 61.5
• Height [mm]: 61
• Manufacturer: LPR

• Construction Year from: 09.1996
• Thickness [mm]: 15.6
• Length [mm]: 62
• Height 1 [mm]: 61
• WVA Number: 21050
• Fitting Position: Rear Axle
• Manufacturer: JAPKO

• Construction Year to: 08.1996
• WVA Number: 21140
• Fitting Position: Rear Axle
• Manufacturer: ASHIKA-KLOCKI

• Vehicle Identification Number (VIN) from: V*000001
• Length [mm]: 61.5
• Width [mm]: 61
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 15.6
• Weight [kg]: 0.66
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 08.1996
• Height [mm]: 61.2
• Thickness [mm]: 15.2
• Wear Warning Contact: excl. wear warning contact
• Brake System: Teves
• Fitting Position: Rear Axle
• Width [mm]: 62
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Construction Year from: 09.1996
• Fitting Position: Rear Axle
• Width [mm]: 61.6
• Thickness [mm]: 15.8
• Height [mm]: 61.2
• Brake System: ATE
• Manufacturer: DENCKERMANN ZAWIESZENIE

Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact

• Construction Year to: 08.1996
• Fitting Position: Front Axle
• Brake System: ATE
• Height 1 [mm]: 60.7
• Height 2 [mm]: 70.6
• Width 1 [mm]: 156.3
• Width 2 [mm]: 155.1
• Thickness 1 [mm]: 17.5
• Thickness 2 [mm]: 18.3
• Wear Warning Contact: excl. wear warning contact
• Lisainfo: Brake pad set, front, 17.5 mm
• Additional information: Brake pad set, front, 17.5 mm

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Width 1 [mm]: 61.8
• Height 1 [mm]: 61
• Thickness 1 [mm]: 15
• Brake System: DELCO
• Wear Warning Contact: without integrated wear sensor
• Weight [kg]: 1.2
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Construction Year to: 08.1996
• Fitting Position: Rear Axle
• Width [mm]: 61.7
• Height [mm]: 57.5
• Thickness [mm]: 15.7
• Wear Warning Contact: excl. wear warning contact
• Brake System: ATE
• Supplementary Article/Info 2: with anti-squeak plate
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

• Vehicle Identification Number (VIN) from: V*000001
• Length [mm]: 61.5
• Width [mm]: 61
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 15.6
• Weight [kg]: 0.66
• Name: SW 40 91 6155
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 08.1996
• Quantity per packing unit: 4
• Fitting Position: Rear Axle
• Thickness [mm]: 15.5
• Width [mm]: 61.5
• Height [mm]: 61
• Brake System: ATE
• Weight [kg]: 0.63
• Manufacturer: TOMEX BRAKES

• Fitting Position: Rear Axle
• Construction Year to: 08.1996
• Quantity per packing unit: 4
• FMSI Code: D427-7316
• Test Mark: E1 90R-011094/467
• Brake System: Continental
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• WVA Number: 21140
• Friction Lining Material: Organic
• Wear Warning Contact: not prepared for wear warning indicator
• Width 1 [mm]: 61.8
• Width 2 [mm]: 61.6
• Height 1 [mm]: 57.6
• Height 2 [mm]: 57.6
• Thickness 1 [mm]: 15.5
• Thickness 2 [mm]: 15.5
• Name: DE LP586
• Manufacturer: DELPHI

• Fitting Position: Rear Axle
• Construction Year from: 08.1996
• Quantity per packing unit: 4
• Manufacturer Restriction: ATE
• Wear Warning Contact: not prepared for wear warning indicator
• Height [mm]: 61
• Width [mm]: 61.5
• Thickness [mm]: 15.5
• Manufacturer: AUTO-GH

• Construction Year from: 09.1996
• Required quantity: 2
• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Brake Type: Disc Brake
• Length [mm]: 720
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: ATE

• Fitting Position: Rear Axle
• Brake System: TEVES
• Width [mm]: 62
• Height [mm]: 61.1
• Thickness [mm]: 14.5
• WVA Number: 21051
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• Name: VA 301183
• Manufacturer: VALEO

• Fitting Position: Rear Axle
• Construction Year from: 06.1996
• Brake System: Ate
• Quantity per packing unit: 4
• Test Mark: ECE-R90
• Height 1 [mm]: 61.2
• Wear Warning Contact: excl. wear warning contact
• Vibration: with vibration damper
• Width 1 [mm]: 61.7
• Thickness 1 [mm]: 15.5
• Manufacturer: CIFAM

• Construction Year from: 09.1996
• Fitting Position: Rear Axle
• Width [mm]: 61.5
• Height [mm]: 61
• Thickness [mm]: 15.7
• Wear Warning Contact: excl. wear warning contact
• Brake System: ATE
• Supplementary Article/Info 2: with anti-squeak plate
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

• Construction Year to: 08.1996
• Quantity per packing unit: 4
• Fitting Position: Rear Axle
• Thickness [mm]: 15.5
• Width [mm]: 61.7
• Height [mm]: 57.5
• Brake System: ATE
• Weight [kg]: 0.57
• Manufacturer: TOMEX BRAKES

• Fitting Position: Rear Axle
• Construction Year from: 08.1996
• Quantity per packing unit: 4
• FMSI Code: D709-7614 D811-7686
• Test Mark: E1 90R-011094/470
• Brake System: Continental
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• WVA Number: 21050
• Friction Lining Material: Organic
• Wear Warning Contact: not prepared for wear warning indicator
• Width 1 [mm]: 61.8
• Width 2 [mm]: 61.8
• Height 1 [mm]: 61
• Height 2 [mm]: 61
• Thickness 1 [mm]: 15.2
• Thickness 2 [mm]: 15.2
• Manufacturer: DELPHI
• Name: DE LP590

• Fitting Position: Rear Axle
• Brake System: TEVES
• Width [mm]: 62
• Height [mm]: 57.6
• Thickness [mm]: 15
• WVA Number: 21140
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• Manufacturer: VALEO

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• FMSI Code: D709-7614 D811-7686
• Test Mark: E1 90R-011094/470
• Brake System: Continental
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• WVA Number: 21050
• Friction Lining Material: Organic
• Wear Warning Contact: not prepared for wear warning indicator
• Width 1 [mm]: 61.8
• Width 2 [mm]: 61.8
• Height 1 [mm]: 61
• Height 2 [mm]: 61
• Thickness 1 [mm]: 14.5
• Thickness 2 [mm]: 14.5
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP1441

• Construction Year from: 09.1996
• Fitting Position: Rear Axle
• Width [mm]: 61.5
• Height [mm]: 61
• Thickness [mm]: 15.7
• Wear Warning Contact: excl. wear warning contact
• Brake System: ATE
• Supplementary Article/Info 2: with anti-squeak plate
• Quality: PREMIUM
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

General Information: Different chamfers on the leading and trailing edges of the brake pads support the silent performance of MEYLE-PD. To ensure this silent performance, slotting and chamfer are individually designed for each brake pad.

• Construction Year from: 06.1996
• Fitting Position: Rear Axle
• Brake System: Ate
• Quantity per packing unit: 4
• Test Mark: ECE-R90
• Height 1 [mm]: 61.2
• Wear Warning Contact: excl. wear warning contact
• Vibration: with vibration damper
• Width 1 [mm]: 61.7
• Thickness 1 [mm]: 15.5
• Manufacturer: METELLI UKL.HAMULCOWY

• Vehicle Identification Number (VIN) from: R*000001
• Vehicle Identification Number (VIN) to: T*999999
• Length [mm]: 61.7
• Width [mm]: 57.5
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 15.5
• Wear Warning Contact: excl. wear warning contact
• Weight [kg]: 0.741
• Observe service information:
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Construction Year to: 07.1996
• Brake Disc Type: solid
• Manufacturer Restriction: ATE
• Wear Warning Contact: not prepared for wear warning indicator
• WVA Number: 21140
• Test Mark: E1 90R-01814/128
• Width [mm]: 61.7
• Thickness [mm]: 15.8
• Height [mm]: 57.5
• Manufacturer: BRECK KLOCKI HAMULCOWE

• Fitting Position: Rear Axle
• Construction Year to: 05.1996
• Brake System: Ate
• Quantity per packing unit: 4
• Test Mark: ECE-R90
• Height 1 [mm]: 57.7
• Wear Warning Contact: excl. wear warning contact
• Vibration: with vibration damper
• Width 1 [mm]: 61.7
• Thickness 1 [mm]: 15.5
• Manufacturer: METELLI UKL.HAMULCOWY

• Construction Year to: 08.1996
• Fitting Position: Rear Axle
• Width [mm]: 61.7
• Height [mm]: 57.5
• Thickness [mm]: 15
• Brake System: ATE
• ABE No.: KBA 60401
• MAPP code available:
• Article number of recommended accessories: 13.0460-0217.2
• Observe dimensions:
• Manufacturer: ATE

Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact

• Fitting Position: Rear Axle
• Construction Year from: 08.1996
• Width [mm]: 62
• Height [mm]: 61.2
• Thickness [mm]: 15.2
• Wear Warning Contact: excl. wear warning contact
• Brake System: Teves
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: QUARO

• Construction Year to: 08.1996
• Fitting Position: Rear Axle
• Block Separation:
• Construction Year from: 03.1994
• Article number of recommended accessories: 1987474014, 1987474928, 1987474277, 1987474192
• Observe technical data:
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 21140
• Thickness [mm]: 15
• Width [mm]: 61.7
• Height [mm]: 57.5
• Brake System: ATE
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: BOS

• Construction Year from: 09.1996
• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with anti-squeak plate, with mounting manual
• Article number of recommended accessories: 1987474130, 1987474307, 1987474277
• Observe technical data:
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 21050
• Thickness [mm]: 14.3
• Width [mm]: 61.5
• Height [mm]: 61
• Brake System: ATE
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: BOS

• Fitting Position: Rear Axle
• Construction Year to: 07.1996
• Quantity per packing unit: 4
• Manufacturer Restriction: ATE
• Wear Warning Contact: not prepared for wear warning indicator
• Test Mark: E1 90R 01025/012
• Height [mm]: 57.5
• Width [mm]: 61.7
• Thickness [mm]: 15.5
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Height [mm]: 74
• Wear Warning Contact: excl. wear warning contact
• Brake System: ATE
• Width 1 [mm]: 156
• Width 2 [mm]: 155
• Thickness 1 [mm]: 19
• Thickness 2 [mm]: 20
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Construction Year from: 09.1996
• Width 1 [mm]: 156.5
• Width 2 [mm]: 155.2
• Height 1 [mm]: 74
• Thickness [mm]: 19.6
• Wear Warning Contact: prepared for wear warning indicator
• WVA Number: 23115, 21829
• Fitting Position: Front Axle
• Manufacturer: JAPKO

• Construction Year to: 08.1996
• Fitting Position: Front Axle
• Height 1 [mm]: 70.4
• Height 2 [mm]: 60.5
• Thickness [mm]: 17.5
• Wear Warning Contact: prepared for wear warning indicator
• Brake System: Teves
• Article number of recommended accessories: 27-0555
• Width 2 [mm]: 157
• Width 1 [mm]: 155
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Construction Year from: 09.1996
• Fitting Position: Front Axle
• Brake System: ATE
• Width 1 [mm]: 156.3
• Width 2 [mm]: 155.1
• Thickness 1 [mm]: 19.8
• Thickness 2 [mm]: 20.3
• Height 1 [mm]: 74
• Height 2 [mm]: 74
• Manufacturer: DENCKERMANN ZAWIESZENIE

Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact

• Construction Year from: 09.1996
• Fitting Position: Front Axle
• WVA Number: 21829, 23116, 23117
• Manufacturer: JAPKO

• Fitting Position: Rear Axle
• Construction Year to: 08.1996
• Width [mm]: 61.8
• Height [mm]: 57.5
• Thickness [mm]: 15.7
• Wear Warning Contact: not prepared for wear warning indicator
• WVA Number: 21140
• Brake System: Teves
• Article number of recommended accessories: 82025700
• Packaging length [cm]: 9.5
• Packaging width [cm]: 8.2
• Packaging height [cm]: 7.3
• Weight [kg]: 0.65
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TEX

• Fitting Position: Rear Axle
• Construction Year to: 08.1996
• Quantity per packing unit: 4
• Width [mm]: 62
• Thickness [mm]: 16
• Height [mm]: 58
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Teves
• WVA Number: 21140
• Manufacturer: BREMBO
• Name: BR P 59 018

• Height 1 [mm]: 74
• Height 2 [mm]: 74
• Thickness [mm]: 19.6
• Wear Warning Contact: prepared for wear warning indicator
• Brake System: Teves
• Fitting Position: Front Axle
• Width 1 [mm]: 157
• Width 2 [mm]: 155
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX
• Lisainfo: 19-0642
• Additional information: 19-0642

• Fitting Position: Rear Axle
• Construction Year from: 08.1996
• Width [mm]: 61.9
• Height [mm]: 61.2
• Thickness [mm]: 15.2
• Wear Warning Contact: not prepared for wear warning indicator
• WVA Number: 21050
• Brake System: Teves
• Article number of recommended accessories: 82025700
• Packaging length [cm]: 9.5
• Packaging width [cm]: 8.2
• Packaging height [cm]: 7.3
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TEX

• Construction Year from: 09.1996
• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Thickness [mm]: 19.5
• Brake System: ATE
• Article number of recommended accessories: KS0098, KS0084, KS0080
• Height [mm]: 74.2
• Width 1 [mm]: 155
• Width 2 [mm]: 156.3
• Manufacturer: LPR

• Fitting Position: Rear Axle
• Construction Year from: 09.1996
• Wear Warning Contact: without integrated wear sensor
• Height 1 [mm]: 61
• Brake System: DELCO
• Width 1 [mm]: 61.8
• Thickness 1 [mm]: 15
• Manufacturer: PROFIPOWER

• Construction Year to: 07.1996
• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Brake System: ATE-TEVES
• Width [mm]: 62
• Height [mm]: 58
• Thickness [mm]: 16
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Construction Year to: 08.1996
• Fitting Position: Front Axle
• Width 1 [mm]: 155.2
• Width 2 [mm]: 156.4
• Height 1 [mm]: 70.6
• Height 2 [mm]: 60.8
• Thickness [mm]: 17.5
• Wear Warning Contact: prepared for wear warning indicator
• Brake System: ATE
• Supplementary Article/Info 2: with anti-squeak plate
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Construction Year from: 08.1996
• Brake Disc Type: solid
• Manufacturer Restriction: ATE
• Wear Warning Contact: not prepared for wear warning indicator
• WVA Number: 21050
• Test Mark: E1 90R-01814/074
• Width [mm]: 61.7
• Thickness [mm]: 15.7
• Height [mm]: 61.2
• Manufacturer: BRECK KLOCKI HAMULCOWE

• Fitting Position: Rear Axle
• Construction Year from: 08.1996
• Quantity per packing unit: 4
• Brake System: ATE-TEVES
• Width [mm]: 62
• Height [mm]: 61
• Thickness [mm]: 16
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Fitting Position: Rear Axle
• Construction Year from: 08.1996
• Quantity per packing unit: 4
• Width [mm]: 62
• Thickness [mm]: 15
• Height [mm]: 61
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Teves
• WVA Number: 21050
• Name: BR P 59 014
• Manufacturer: BREMBO

• Construction Year from: 09.1996
• Fitting Position: Front Axle
• WVA Number: 21829, 23116, 23117
• Manufacturer: ASHIKA-KLOCKI

• Construction Year from: 09.1996
• Fitting Position: Rear Axle
• Width [mm]: 61.6
• Height [mm]: 61.2
• Thickness [mm]: 15.8
• Brake System: ATE
• Test Mark: E9 90R-02A1382/1350
• MAPP code available:
• Article number of recommended accessories: 13.0460-0198.2, 13.0460-0246.2, 13.0460-0347.2
• Observe dimensions:
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: ATE
• Quality class: Q

Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact

• Fitting Position: Front Axle
• Construction Year from: 09.1996
• Quantity per packing unit: 4
• FMSI Code: D840-7711
• Test Mark: E1 90R-01881/540
• Brake System: Continental
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• WVA Number: 21829, 23115
• Friction Lining Material: Semi-Metallic
• Wear Warning Contact: prepared for wear warning indicator
• Width 1 [mm]: 156.5
• Width 2 [mm]: 155
• Height 1 [mm]: 74
• Height 2 [mm]: 73.9
• Thickness 1 [mm]: 19.5
• Thickness 2 [mm]: 19.5
• Manufacturer: DELPHI
• Name: DE LP1600

• Construction Year from: 08.1996
• Manufacturer Restriction: ATE
• Wear Warning Contact: prepared for wear warning indicator
• Height [mm]: 74.2
• Thickness [mm]: 19.5
• directional:
• Fitting Position: Front Axle
• Width [mm]: 156
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX
• Lisainfo: 19-1405
• Additional information: 19-1405

• Construction Year to: 08.1996
• Quantity per packing unit: 4
• Fitting Position: Front Axle
• Thickness [mm]: 18
• Height 1 [mm]: 70.6
• Height 2 [mm]: 60.8
• Wear Warning Contact: prepared for wear warning indicator
• Brake System: ATE
• Width 1 [mm]: 155.1
• Width 2 [mm]: 156.4
• Weight [kg]: 1.66
• Manufacturer: TOMEX BRAKES

• Construction Year from: 09.1996
• Fitting Position: Front Axle
• Width 1 [mm]: 155.2
• Width 2 [mm]: 156.3
• Height [mm]: 74
• Thickness [mm]: 19.6
• Number of wear indicators [per axle]: 2
• Wear Warning Contact: with acoustic wear warning
• Brake System: ATE
• Supplementary Article/Info 2: with anti-squeak plate
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Construction Year from: 08.1996
• Quantity per packing unit: 4
• Manufacturer Restriction: ATE
• Wear Warning Contact: not prepared for wear warning indicator
• Test Mark: E1 90R 01025/450
• Height [mm]: 61
• Width [mm]: 61.5
• Thickness [mm]: 15.5
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Brake System: Ate
• Construction Year from: 06.1996
• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Test Mark: ECE-R90
• Height 1 [mm]: 74.4
• Height 2 [mm]: 74.4
• Wear Warning Contact: prepared for wear warning indicator
• Vibration: with vibration damper
• Width 1 [mm]: 156.3
• Width 2 [mm]: 155.1
• Thickness 1 [mm]: 19.5
• Manufacturer: METELLI UKL.HAMULCOWY

• Fitting Position: Front Axle
• Construction Year to: 08.1996
• Quantity per packing unit: 4
• FMSI Code: D644-7522
• Test Mark: E1 90R-01881/463
• Brake System: Continental
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• WVA Number: 21411, 21413
• Friction Lining Material: Semi-Metallic
• Wear Warning Contact: prepared for wear warning indicator
• Width 1 [mm]: 155.5
• Width 2 [mm]: 156.3
• Height 1 [mm]: 70.8
• Height 2 [mm]: 60.6
• Thickness 1 [mm]: 17.5
• Thickness 2 [mm]: 17.5
• Manufacturer: DELPHI
• Name: DE LP873

• Construction Year to: 12.1996
• Length [mm]: 156.4, 155.1
• Width [mm]: 60.8, 70.6
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with piston clip
• Fitting Position: Front Axle
• Thickness 1 [mm]: 17.2, 18
• Wear Warning Contact: excl. wear warning contact
• Weight [kg]: 1.66
• Observe service information:
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 08.1996
• Quantity per packing unit: 4
• Fitting Position: Front Axle
• Height [mm]: 74.1
• Wear Warning Contact: with acoustic wear warning
• Brake System: ATE
• Width 1 [mm]: 156.4
• Width 2 [mm]: 155.4
• Thickness 1 [mm]: 19.5
• Thickness 2 [mm]: 20.3
• Weight [kg]: 2.25
• Manufacturer: TOMEX BRAKES

• Construction Year from: 01.1996
• Construction Year to: 01.1998
• not for country specific design: Europe
• Length [mm]: 155.19, 156.31
• Width [mm]: 74
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with piston clip
• Fitting Position: Front Axle
• Thickness 1 [mm]: 18.3, 19.1
• Weight [kg]: 1.977
• Name: SW 40 91 6107
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 09.1996
• Fitting Position: Rear Axle
• Alternatively:
• Quantity per packing unit: 4
• Thickness [mm]: 15.6
• Test Mark: R90 Homologated
• Width [mm]: 62
• Height [mm]: 61
• Weight [kg]: 0.654
• Height 1 [mm]: 61
• Wear Warning Contact: not prepared for wear warning indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: ATE
• Packing Type: Box
• WVA Number: 21050
• Packaging length [cm]: 15
• Packaging width [cm]: 10.5
• Packaging height [cm]: 4.3
• Manufacturer: JURID

• Fitting Position: Front Axle
• Construction Year from: 08.1996
• Quantity per packing unit: 4
• FMSI Code: D800-7605 D819-7605
• Test Mark: E1 90R-01881/1259
• Brake System: Continental
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• WVA Number: 21829, 23116, 23117
• Friction Lining Material: Semi-Metallic
• Wear Warning Contact: with acoustic wear warning
• Width 1 [mm]: 156.3
• Width 2 [mm]: 155
• Height 1 [mm]: 74
• Height 2 [mm]: 73.9
• Thickness 1 [mm]: 19.5
• Thickness 2 [mm]: 19.5
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP1731

• Construction Year from: 09.1996
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with anti-squeak plate, with piston clip
• Article number of recommended accessories: 1987473018, 1987474973, 1987474587, 1987474241
• Observe technical data:
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 23116
• Height [mm]: 74.2
• Width 1 [mm]: 155.4
• Width 2 [mm]: 156.4
• Thickness 1 [mm]: 19.5
• Thickness 2 [mm]: 20.3
• Brake System: ATE
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: BOS

Wear Warning Contact: with integrated wear sensor, with acoustic wear warning

• Fitting Position: Rear Axle
• Construction Year from: 08.1996
• Quantity per packing unit: 4
• Width [mm]: 61.9
• Height [mm]: 61.2
• Thickness [mm]: 15.2
• Wear Warning Contact: not prepared for wear warning indicator
• WVA Number: 21050
• Brake System: Teves
• Article number of recommended accessories: 8DZ 355 202-891
• Assy./disassy. by qualified personnel required!:
• Name: HE 8DB355007381
• Manufacturer: HELLA PAGID

• Construction Year to: 08.1996
• Fitting Position: Front Axle
• Block Separation:
• Construction Year from: 03.1994
• Supplementary Article/Info 2: with piston clip, with anti-squeak plate
• Observe technical data:
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 21411
• Height 1 [mm]: 60.6
• Height 2 [mm]: 70.7
• Width 1 [mm]: 155.4
• Width 2 [mm]: 156.5
• Thickness 1 [mm]: 17.5
• Thickness 2 [mm]: 18.4
• Brake System: ATE
• Manufacturer: BOSCH HAMULCE

Article number of recommended accessories: 1987474241, 1987474588, 1987474974, 1987474933, 1987474934, 1987474929

• Fitting Position: Front Axle
• Construction Year from: 08.1996
• Quantity per packing unit: 4
• Manufacturer Restriction: ATE
• Wear Warning Contact: prepared for wear warning indicator
• Test Mark: E9 90R 01107/054
• Height [mm]: 74.2
• Width [mm]: 156.4
• Thickness [mm]: 19.5
• directional:
• Article number of recommended accessories: PFK302
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW
• Quality class: Q

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Construction Year to: 07.1996
• Quantity per packing unit: 4
• Brake System: ATE
• Width 1 [mm]: 155
• Width 2 [mm]: 156
• Height 1 [mm]: 71
• Height 2 [mm]: 61
• Thickness [mm]: 17
• Wear Warning Contact: prepared for wear warning indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Construction Year from: 08.1996
• Quantity per packing unit: 4
• Brake System: ATE
• Width 1 [mm]: 155
• Width 2 [mm]: 156
• Height [mm]: 74
• Thickness [mm]: 20
• Wear Warning Contact: prepared for wear warning indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Construction Year from: 08.1996
• Manufacturer Restriction: ATE
• Wear Warning Contact: prepared for wear warning indicator
• WVA Number: 20676, 21828, 21829
• Test Mark: E1 90R-01811/052
• Width [mm]: 156.2, 155
• Thickness [mm]: 19.6, 20.3
• Height [mm]: 74
• Manufacturer: BRECK KLOCKI HAMULCOWE

• Fitting Position: Front Axle
• Construction Year to: 08.1996
• Quantity per packing unit: 4
• Thickness [mm]: 18
• Height 1 [mm]: 61
• Height 2 [mm]: 71
• Wear Warning Contact: prepared for wear warning indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Teves
• Width 1 [mm]: 155
• Width 2 [mm]: 156
• WVA Number: 21411, 21413
• Manufacturer: BREMBO
• Name: BR P 59 019

• Construction Year from: 09.1996
• Fitting Position: Front Axle
• Width 1 [mm]: 156.3
• Height 1 [mm]: 74
• Thickness 1 [mm]: 19.8
• Width 2 [mm]: 155.1
• Height 2 [mm]: 74
• Thickness 2 [mm]: 20.3
• Brake System: ATE
• Test Mark: E1 90R-01085/011
• MAPP code available:
• Article number of recommended accessories: 24.8190-0713.2, 24.8190-0714.2, 24.8190-0718.2
• Observe dimensions:
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: ATE