• for OE number: 46548478
• Spanner Size: 16 mm
• Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode
• Thread Length [mm]: 19
• Manufacturer: KAMOKA

• Fuel Type: CNG/LPG
• Supplementary Article/Info 2: Electrode gap must be set for operation on gas
• Replace after km: 15,000
• Electrode Gap [mm]: 0.7
• Length [mm]: 126
• Height [mm]: 51
• Weight [kg]: 0.062
• Spark Plug: 1 - Earthed Electrode
• Version: VR7EC1
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 12 12 1 704 399
• Spanner Size: 16 mm
• Spark Plug: Nickel Middle Electrode, 2 - Earthed Electrode
• Thread Length [mm]: 19
• Manufacturer: KAMOKA

• Fuel Type: CNG/LPG
• Supplementary Article/Info 2: Electrode gap must be set for operation on gas
• Replace after km: 15,000
• Required quantity: 6
• Electrode Gap [mm]: 0.9
• Tightening Torque [Nm]: 28
• Thread Size: M 14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 16
• Spark Position [mm]: 3
• Number of pins: 1
• Name: SššTEKššNAL
• Manufacturer: BOS

• Engine Code: B258I
• Required quantity: 6
• Fuel Mixture Formation: Motronic
• Quantity per packing unit: 4
• for OE number: 1WT318110
• Connector type: Solid SAE
• Diameter [mm]: 14
• Spanner Size: 16
• Tightening Torque [Nm]: 22
• Weight [g]: 43
• Spark Plug: 1 - Earthed Electrode, Nickel Middle Electrode
• Thread Length [mm]: 19
• Gross Weight [g]: 46
• alternative item: IK20
• Manufacturer: DENSO
• Name: DN K20TT
• Lisainfo: K20TT DENSO
• Additional information: K20TT DENSO

• Construction Year to: 08.1997
• Required quantity: 6
• Electrode Gap [mm]: 1
• Tightening Torque [Nm]: 28
• Thread Size: M 14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 16
• Spark Position [mm]: 6
• Number of pins: 2
• Name: SššTEKššNAL
• Manufacturer: BOS

• Engine Code: B258I
• Fuel Mixture Formation: Motronic
• Quantity: 6
• Spark Plug: 2 - Earthed Electrode
• Weight [kg]: 0.044
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 03.1994
• Supplementary Article/Info 2: for difficult operating conditions
• Required quantity: 6
• Electrode Gap [mm]: 0.9
• Tightening Torque [Nm]: 28
• Thread Size: M 14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 16
• Spark Position [mm]: 6
• Number of pins: 2
• Name: SššTEKššNAL
• Manufacturer: BOS

• Engine Code: B258I
• Required quantity: 6
• Fuel Mixture Formation: Motronic
• Quantity per packing unit: 10
• for OE number: 7700500168
• Connector type: Removable SAE
• Diameter [mm]: 14
• Spanner Size: 16
• Tightening Torque [Nm]: 22
• Weight [g]: 43
• Spark Plug: 2 - Earthed Electrode, Nickel Middle Electrode
• Thread Length [mm]: 19
• Gross Weight [g]: 46
• alternative item: K20TT
• Manufacturer: DENSO
• Name: DN K20TXR
• Lisainfo: K20TXR DENSO
• Additional information: K20TXR DENSO

• Construction Year from: 01.1994
• Engine Code: B258i MOTRONIC
• Quantity per packing unit: 4
• Spanner Size: 16 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 6
• Name: SššTEKššNAL
• Manufacturer: NGK
• Additional information: V-LINE 20
• Lisainfo: V-LINE 20

Spark Plug: Nickel Middle Electrode, 2 - Earthed Electrode, Interference Suppression 1 kOhm, with gasket seat, Fixed SAE connector

• Construction Year from: 01.1994
• Engine Code: B258i MOTRONIC
• Spanner Size: 16 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 6
• Name: SššTEKššNAL
• Manufacturer: NGK
• Additional information: BKR6EK
• Lisainfo: BKR6EK

Spark Plug: Nickel Middle Electrode, 2 - Earthed Electrode, Interference Suppression 1 kOhm, with gasket seat, Fixed SAE connector

• Engine Code: B 258 I
• Construction Year from: 03.1994
• Supplementary Article/Info 2: for difficult operating conditions
• Electrode Gap [mm]: 0.8
• External Thread [mm]: M14 x 1,25
• Spanner Size: 16
• Spark Plug: 3 - Earthed Electrode
• Thread Length [mm]: 19
• Weight [kg]: 0.044
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Required quantity: 6
• Quantity per packing unit: 10
• Electrode Gap [mm]: 0.6
• Connector type: SAE
• Thread Size: M14x1.25
• Spanner Size: 16 mm
• Quality/ Grade: Nickel GE
• Packing Type: Box
• Thread Length [mm]: 19
• Technical Information Number: RC89TMC
• Spark Position [mm]: 5
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Packaging length [cm]: 8.85
• Packaging width [cm]: 2.6
• Packaging height [cm]: 2.35
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 9
• Projection [mm]: 3
• Name: CH OE120/T10
• Manufacturer: CHAMPION

Spark Plug: 3 - Earthed Electrode, with gasket seat, Copper Centre Electrode

• Required quantity: 6
• Alternatively:
• Quantity per packing unit: 10
• Electrode Gap [mm]: 0.75
• Connector type: SAE
• Thread Size: M14x1.25
• Spanner Size: 16 mm
• Quality/ Grade: Ti Poly-V
• Packing Type: Box
• Thread Length [mm]: 19
• Technical Information Number: CET12P
• Spark Position [mm]: 3
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Packaging length [cm]: 8.85
• Packaging width [cm]: 2.6
• Packaging height [cm]: 2.35
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 10
• Projection [mm]: 1.5
• Name: CH CET12P
• Manufacturer: CHAMPION

Spark Plug: 1 - Earthed Electrode, with gasket seat, Platinum Middle Electrode

• Required quantity: 6
• Quantity per packing unit: 10
• Electrode Gap [mm]: 1.2
• Connector type: SAE
• Thread Size: M14x1,25
• Spanner Size: 16 mm
• Spark Plug: 3 - Earthed Electrode, with gasket seat
• Thread Length [mm]: 19
• Technical Information Number: 14 FGR-8 CTU
• Self-service suited packaging see parts list:
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Name: SššTEKššNAL
• Manufacturer: BERU

• Engine Code: B258I
• Spark Plug: 1 - Earthed Electrode, with resistor
• Electrode Gap [mm]: 0.9
• Thread Size: M14 x 1.25
• Thread Length [mm]: 19
• Spanner Size: 16
• Technical Information: Platinum-tip
• Name: MM SPB7206-9
• Manufacturer: MAGNETI MARELLI

• Construction Year from: 03.1994
• Required quantity: 6
• Electrode Gap [mm]: 0.9
• Tightening Torque [Nm]: 28
• Thread Size: M 14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 16
• Spark Position [mm]: 5
• Number of pins: 4
• Manufacturer: BOSCH

• Required quantity: 6
• Alternatively:
• Quantity per packing unit: 10
• Electrode Gap [mm]: 0.75
• Connector type: SAE
• Thread Size: M14x1,25
• Spanner Size: 16 mm
• Quality/ Grade: Poly-V Tit
• Thread Length [mm]: 19
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 10
• Name: SššTEKššNAL
• Manufacturer: BERU

Spark Plug: 1 - Earthed Electrode, with gasket seat, Platinum Middle Electrode

• Fuel Type: CNG/LPG
• Replace after km: 30,000
• Electrode Gap [mm]: 1.1
• Thread Size: M14
• Spanner Size: 16 [mm]
• Number of pins: 1
• Thread Length [mm]: 19
• Thread Pitch [mm]: 1.25
• Weight [kg]: 0.045
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fuel Type: CNG/LPG
• Replace after km: 30,000
• Required quantity: 6
• Electrode Gap [mm]: 0.7
• Tightening Torque [Nm]: 28
• Thread Size: M 14 x 1,25
• Thread Length [mm]: 19
• Spanner Size: 16
• Spark Position [mm]: 4
• Number of pins: 1
• Name: SššTEKššNAL
• Manufacturer: BOS

• Tightening Torque [Nm]: 25
• Electrode Gap [mm]: 1
• Thread Size: M14 x 1.25
• Spanner Size: 16
• Spark Plug: 1 - Earthed Electrode
• Thread Length [mm]: 19
• Assy./disassy. by qualified personnel required!:
• Name: HE 8EH188706071
• Manufacturer: HELLA

• Required quantity: 6
• Alternatively:
• Quantity per packing unit: 4
• Electrode Gap [mm]: 0.8
• Connector type: SAE
• Thread Size: M14x1.25
• Spanner Size: 16 mm
• Quality/ Grade: Pt GE
• Packing Type: Box
• Thread Length [mm]: 19
• Technical Information Number: RC10WMPB3
• Spark Position [mm]: 5
• Tightening torque from [Nm]: 25
• Tightening torque to [Nm]: 30
• Packaging length [cm]: 9.5
• Packaging width [cm]: 2.4
• Packaging height [cm]: 2.4
• Resistor from [kOhm]: 3
• Resistor to [kOhm]: 10
• Projection [mm]: 3
• Name: CH CCH9013
• Manufacturer: CHAMPION

Spark Plug: 1 - Earthed Electrode, with gasket seat, Iridium Middle Electrode

• Engine Code: B258I
• Required quantity: 6
• Fuel Type: CNG/LPG
• Fuel Mixture Formation: Motronic
• Quantity per packing unit: 4
• Connector type: Solid SAE
• Diameter [mm]: 14
• Spanner Size: 16
• Tightening Torque [Nm]: 22
• Weight [g]: 43
• Thread Length [mm]: 19
• Gross Weight [g]: 46
• alternative item: IK20TT
• Manufacturer: DENSO
• Name: DN IK20TT
• Lisainfo: IK20TT DENSO
• Additional information: IK20TT DENSO

Spark Plug: with resistor, 1 - Earthed Electrode, Iridium Middle Electrode, Platinum mass electrode

• Construction Year from: 01.1994
• Engine Code: B258i MOTRONIC
• Spanner Size: 16 mm
• Thread Size: M14 x 1,25
• Thread Length [mm]: 19
• Spark Position [mm]: 3
• Name: SššTEKššNAL
• Manufacturer: NGK

Spark Plug: Iridium Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat, Fixed SAE connector

• Construction Year from: 01.1994
• Engine Code: B258i MOTRONIC
• Spanner Size: 16 mm
• Thread Size: M14 x 1,25
• Spark Plug: Iridium Middle Electrode, Fixed SAE connector
• Fuel Type: CNG/LPG
• Recommended change interval [km]: 60,000
• Name: SššTEKššNAL
• Manufacturer: NGK
• Lisainfo: LPG1
• Additional information: LPG1