• Installatsiooni pool: stirnseitig
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Width [mm]: 10
• Material: FPM (fluoride rubber)
• Tootja: JP GROUP A/S
• Lisainfo: Oil seal, 35x48x10 mm

• Fitting Position: frontal sided
• Outer Diameter [mm]: 47
• Inner Diameter [mm]: 32
• Width [mm]: 10
• Tootja: JP GROUP A/S
• Lisainfo: PAKENDIS 10 tk

• Installatsiooni pool: stirnseitig
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Width [mm]: 10
• Tootja: JP GROUP
• Lisainfo: Oil seal, 35x48x10

Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)

• Mootorikood: AJH
• Fitting Position: transmission sided
• Inner Diameter [mm]: 85
• Outer Diameter [mm]: 105
• Thickness [mm]: 11
• Lisainfo: Oil seal for crankshaft, 85x105x11 mm

• Mootorikood: AWC, AJH
• Installatsiooni pool: kastipoolselt
• Plokieraldus:
• Material: PTFE (polytetrafluoroethylene)
• Supplementary Article/Info 2: with mounting sleeve
• Tootja: JP GROUP
• Lisainfo: Seal flange for crankshaft, rear

• Installatsiooni pool: stirnseitig
• Kaal (kg): 0,016
• Siseläbimõõt [mm]: 35
• Välisläbimõõt [mm]: 48
• Materjal: ACM((Polyacryl-Kautschuk)
• vajaminev tükihulk: 1
• Jämedus/Tugevus (mm): 10
• Üldine informatsioon: seal ring;35*48*10 mm
• Tootja: VIKA

• Installatsiooni pool: stirnseitig
• Pöördeliik: Vahelduvkeere
• Materjal: FPM (Fluor-Kautschuk)/ACM (Polyacryl-Kautschuk)
• Tolmukaitse: koos tolmu kaitseäärisega
• Seerianumber: NUP-VW-010
• Tootja: NTY

• vajaminev tükihulk: 1
• Kogus pakendis: 10
• Installatsiooni pool: stirnseitig
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Installatsiooni pool: ees
• Siseläbimõõt [mm]: 35
• Välisläbimõõt [mm]: 48
• Kõrgus (mm): 10
• Seerianumber: NUP-VW-012
• Tootja: NTY

• Kerenumber (VIN) kuni: 7M-Y-509 291
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Dust Cover: with dust lip
• Swirl Type: Right-hand Twist
• Fitting Position: frontal sided
• Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Thickness [mm]: 10
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 47
• Material: FPM (fluoride rubber)
• Fitting Position: frontal sided
• Weight [kg]: 0.03
• Tootja: FEBI BILSTEIN
• Lisainfo: FE03598

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: AJH
• Kerenumber (VIN) kuni: ******7M*Y*509291
• Thickness [mm]: 10
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Material: ACM (Polyacrylate)
• Fitting Position: frontal sided
• Weight [kg]: 0.016
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: AJH
• Ehitusaasta kuni: 02.2000
• Fitting Position: frontal sided
• Height [mm]: 10
• Material: ACM (Polyacrylate)
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Tootja: BGA

• Installatsiooni pool: stirnseitig
• Siseläbimõõt [mm]: 32
• Välisläbimõõt [mm]: 47
• Jämedus/Tugevus (mm): 10
• Üldine informatsioon: Oil seal for camshaft; 47*10*32
• Tootja: VIKA

• Installatsiooni pool: stirnseitig
• Kerenumber (VIN) alates: 7M-Y-509292
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Dust Cover: with dust lip
• Tootja: TOPRAN

Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: stirnseitig
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Radial Shaft Seal Design: ASW
• Swirl Type: Right-hand Twist
• Material: FPM (fluoride rubber)
• Dust Cover: with dust lip
• Tootja: ELRING

• Installatsiooni pool: stirnseitig
• Siseläbimõõt [mm]: 35
• Välisläbimõõt [mm]: 48
• Kõrgus (mm): 10
• Pöördeliik: Paremkeere
• Tüüp simmerling tihend: ASW
• Tootja: DR MOTOR PRZEWODY PRZELEWOWE
• Nimetus: DRM 01969

• Mootorikood: AJH
• Kerenumber (VIN) kuni: -> 7MY509291
• Fitting Position: frontal sided
• Height 1 [mm]: 10
• Outer Diameter 1 [mm]: 48
• Inner Diameter 1 [mm]: 35
• Material: FPM (fluoride rubber)
• for OE number: 034115137A
• Swirl Type: Right-hand Twist
• Dust Cover: with dust lip
• Nimetus: VOLLI RONGASTIHEND, OLIPUMP
• Tootja: COT

• Mootorikood: AWC
• Kogus pakendis: 10
• Fitting Position: frontal sided
• Weight [kg]: 0.035
• Tootja: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: frontal sided
• General Information: shaft oil seal
• Tootja: BORSEHUNG

• Mootorikood: AWC
• Ehitusaasta alates: 06.2000
• Fitting Position: frontal sided
• Height [mm]: 10
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Tootja: BGA USZCZELKI

Material: NBR (nitrile butadiene rubber), PTFE (polytetrafluoroethylene)

• Mootorikood: AJH
• Thickness [mm]: 11
• Inner Diameter [mm]: 85
• Outer Diameter [mm]: 105
• Material: FPM (fluoride rubber)
• Fitting Position: transmission sided
• Weight [kg]: 0.058
• Tootja: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: AWC, AJH
• Plokieraldus:
• Kerenumber (VIN) alates: ******7M*Y*509292
• Thickness [mm]: 10
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Fitting Position: frontal sided
• Weight [kg]: 0.01
• Observe service information:
• Tootja: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: AJH
• Installatsiooni pool: stirnseitig
• Ehitusaasta kuni: 02.2000
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Swirl Type: Right-hand Twist
• Nimetus: VOLLI RONGASTIHEND, VŽNTVOLL
• Tootja: AJU

• Installatsiooni pool: stirnseitig
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Radial Shaft Seal Design: ASW
• Swirl Type: Right-hand Twist
• Dust Cover: with dust lip
• Supplementary Article/Info 2: with mounting sleeve
• Observe mounting information:
• Tootja: ELRING
• Lisainfo: 155.560 ELR

Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease

• Installatsiooni pool: stirnseitig
• Mootorikood: AWC, AJH
• Plokieraldus:
• Material: PTFE (polytetrafluoroethylene), ACM (Polyacrylate)
• Supplementary Article/Info 2: with mounting sleeve
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Radial Shaft Seal Design: A SL
• Swirl Type: Right-hand Twist
• Nimetus: VOLLI RONGASTIHEND, VŽNTVOLL
• Tootja: REI

• Mootorikood: AJH
• Fitting Position: frontal sided
• Supplementary Article/Info 2: with mounting sleeve
• Height 1 [mm]: 10
• Outer Diameter 1 [mm]: 48
• Inner Diameter 1 [mm]: 35
• Material: PTFE (polytetrafluoroethylene)
• for OE number: 038103085
• Swirl Type: Right-hand Twist
• Dust Cover: with dust lip
• Nimetus: VOLLI RONGASTIHEND, VŽNTVOLL
• Tootja: COT

• Installatsiooni pool: kastipoolselt
• Supplementary Article/Info 2: with flange
• Swirl Type: Left-hand Twist
• Outer Diameter [mm]: 152
• Inner Diameter [mm]: 85
• Height [mm]: 15
• Tootja: DELLO AUTOMEGA

• Fitting Position: transmission sided
• Housing Type: with housing
• Housing material: Cast Aluminium
• Sealing lip material: PTFE (polytetrafluoroethylene)
• Tootja: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: stirnseitig
• Mootorikood: AWC
• Ehitusaasta alates: 06.2000
• Inner Diameter [mm]: 35
• Outer Diameter [mm]: 48
• Height [mm]: 10
• Swirl Type: Right-hand Twist
• Nimetus: VOLLI RONGASTIHEND, VŽNTVOLL
• Tootja: AJU

• vajaminev tükihulk: 1
• Mootorikood: AJH
• Kogus pakendis: 5
• Installatsiooni pool: kastipoolselt
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Installatsiooni pool: kastipoolselt
• Seerianumber: NUP-VW-005
• Tootja: NTY

• Mootorikood: AWC
• Ehitusaasta alates: 08.2000
• Installatsiooni pool: kastipoolselt
• for OE number: 038103171
• Material: PTFE (polytetrafluoroethylene)
• Tootja: FAI

• Fitting Position: Pulley side
• Nimetus: Volli rongastihendikomplekt, Mootor
• Tootja: COT

• Installatsiooni pool: kastipoolselt
• Kaal (kg): 0,16
• Siseläbimõõt [mm]: 85
• Välisläbimõõt [mm]: 131, 152
• Materjal: PTFE (Polytetrafluorethylen)
• vajaminev tükihulk: 1
• Piirangutega toode/piirangu info 2: koos flantsiga
• Jämedus/Tugevus (mm): 15,7
• Üldine informatsioon: seal ring
• Tootja: VIKA

• Installatsiooni pool: kastipoolselt
• Siseläbimõõt [mm]: 85
• Korpusetüüp: koos korpusega
• Nimetus: Volli rongastihend, V„ntvoll
• Tootja: DRM

• Installatsiooni pool: kastipoolselt
• Üldine informatsioon: seal ring; rear; with aluminium frame
• Tootja: VIKA

• Mootorikood: AJH
• Ehitusaasta alates: 06.2000
• Fitting Position: transmission sided
• Height [mm]: 16
• Inner Diameter [mm]: 131
• Outer Diameter [mm]: 155
• Housing Type: with housing
• Tootja: BGA

• Mootorikood: AWC, AJH
• Plokieraldus:
• Kerenumber (VIN) alates: 7M-Y-509 292
• for OE number: 03G 105 021 C
• Thickness [mm]: 10
• Inner Diameter [mm]: 35
• Fitting Position: frontal sided
• Outer Diameter [mm]: 48
• Weight [kg]: 0.031
• Tootja: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thickness [mm]: 15.7
• Inner Diameter [mm]: 85
• Outer Diameter [mm]: 131, 152
• Material: PTFE (polytetrafluoroethylene)
• Fitting Position: transmission sided
• Weight [kg]: 0.16
• Supplementary Article/Info 2: with flange
• Observe service information:
• Tootja: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Välisläbimõõt [mm]: 47
• Jämedus/Tugevus (mm): 10
• Siseläbimõõt [mm]: 32
• Installatsiooni pool: kastipoolselt
• Kaal (kg): 0,195
• Tootja: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: kastipoolselt
• Inner Diameter [mm]: 85
• Radial Shaft Seal Design: IWD
• Swirl Type: Left-hand Twist
• Housing Type: with housing
• Observe mounting information:
• Supplementary Article/Info 2: with mounting sleeve
• Tootja: ELRING

Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease

• Installatsiooni pool: kastipoolselt
• Mootorikood: AWC, AJH
• Plokieraldus:
• Material: PTFE (polytetrafluoroethylene)
• Supplementary Article/Info 2: with flange
• Nimetus: VOLLI RONGASTIHEND, VŽNTVOLL
• Tootja: REI

• Mootorikood: AJH, AWC
• Fitting Position: transmission sided
• Supplementary Article/Info 2: with flange, with mounting sleeve
• Height 1 [mm]: 15.7
• Outer Diameter 1 [mm]: 131
• Outer Diameter 2 [mm]: 152
• Inner Diameter 1 [mm]: 85
• Material: PTFE (polytetrafluoroethylene)
• for OE number: 038103171B
• Nimetus: VOLLI RONGASTIHEND, VŽNTVOLL
• Tootja: COT

• Fitting Position: transmission sided
• General Information: shaft seal; crankshaft
• Tootja: BORSEHUNG

• Installatsiooni pool: kastipoolselt
• Plokieraldus:
• Mootorikood: AJH, AWC
• Ehitusaasta kuni: 02.2000
• Ehitusaasta alates: 06.2000
• Housing Type: with housing
• Inner Diameter [mm]: 131
• Outer Diameter [mm]: 152
• Height [mm]: 16
• Swirl Type: Left-hand Twist
• Material: PTFE (polytetrafluoroethylene)
• for OE number: 06A103171A
• Nimetus: VOLLI RONGASTIHEND, VŽNTVOLL
• Tootja: AJU