• Kasutuspinge [V]: 12
• Lülitamispunkt alates [°C]: 84, 91
• Lülituspunkt kuni [°C]: 95, 102
• Võtmekaugus: 29
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Värv: must
• Keermemõõt: M22 x 1,5
• Pistikkontaktide arv: 3
• Tootja: JP GROUP
• Lisainfo: Thermo switch for fan 102-91/95-84 C

• Kasutuspinge [V]: 12
• Anduritüüp: NTC-andur
• Lülituspunkt [°C]: 150
• Läbimõõt [mm]: 20
• Pistikkontaktide arv: 4
• Tootja: JP GROUP
• Lisainfo: Temperature sensor for cooling system, 4 pins

• Siseläbimõõt [mm]: 19,5
• Jämedus/Tugevus (mm): 3,5
• Materjal: Kumm
• OE-numbri jaoks: 7198663
• Tootja: DELLO AUTOMEGA

• Mootorikood: APE
• Siseläbimõõt [mm]: 19,5
• Jämedus/Tugevus (mm): 3,5
• Kaal (kg): 0,001
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• OE-numbri jaoks: 1331294
• Pistikkontaktide arv: 4
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Installatsiooniläbimõõt (mm): 20
• Tootja: KAMOKA

• OE-numbri jaoks: 357919501A
• Tootja: KAMOKA

• OE-numbri jaoks: 1100619
• Tootja: KAMOKA

• Hulk: 1
• Kaal (kg): 0,2
• Ühenduste arv: 4
• Välisläbimõõt [mm]: 20
• Pistikuteostus-ID: 4
• Värv: sinine
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• vajaminev tükihulk: 1
• Üldine informatsioon: temperature sensor; blue; 4 pins
• Tootja: VIKA

• Seerianumber: ECT-AU-008
• Pistikkontaktide arv: 4
• Tootja: NTY

• Hulk: 1
• Kaal (kg): 0,02
• Ühenduste arv: 4
• Välisläbimõõt [mm]: 20
• Pistikuteostus-ID: 4
• Värv: roheline
• vajaminev tükihulk: 1
• Üldine informatsioon: temperature sensor; green; 4 pins
• Tootja: VIKA

• Seerianumber: ECT-AU-004
• Pistikkontaktide arv: 4
• Värvimarkeering: roheline
• Pistikukatte kuju: ovaalne
• Tootja: NTY

• Mootorikood: APE
• Ühenduste arv: 4
• Tootja: 3RG

• Värv: must
• Värvimarkeering: sinine
• Pistikkontaktide arv: 4
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: MAX

• Pistikkontaktide arv: 4
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: MAX

• Anduritüüp: NTC-andur
• Montaaživiis: klemmitud
• Pistikukatte kuju: ristkülik
• Pistikkontaktide arv: 4
• Pistiku värv: must
• OE-numbri jaoks: 059919501
• Piirangutega toode/piirangu info 2: koos osadega
• Nimetus: Andur,Jahutusvedeliku temp.
• Tootja: NRF

• Korpusevärv: must
• Pistikkontaktide arv: 4
• Võtmekaugus: 0
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: DLP

• Anduritüüp: NTC-andur
• Montaaživiis: klemmitud
• Pistikukatte kuju: D-kuju
• Pistikkontaktide arv: 4
• OE-numbri jaoks: 059919501A
• Piirangutega toode/piirangu info 2: koos osadega
• Nimetus: Andur,Jahutusvedeliku temp.
• Tootja: NRF

• Mootorikood: APE
• Keermemõõt: M10x1
• Võtmekaugus: 13
• Vastab originaalosa värvile: valge
• Tootja: FACET

• Mootorikood: APE
• Pistikkontaktide arv: 4
• Piirangutega toode/piirangu info: koos tihendiga
• Piirangutega toode/piirangu info 2: koos klemmihoidjaga
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Kaal (kg): 0,02
• Ühenduste arv: 4
• Välisläbimõõt [mm]: 20
• Pistikuteostus-ID: 4
• Värv: must
• vajaminev tükihulk: 1
• Üldine informatsioon: temperature sensor; black; 4 pins
• Tootja: VIKA

• Mootorikood: APE
• Keermemõõt: M10x1
• Võtmekaugus: 13
• Vastab originaalosa värvile: valge
• Nimetus: ANDUR,OLITEMPERATUUR
• Tootja: EPS

• uus mudel:
• Välisläbimõõt [mm]: 20
• Ühenduste arv: 4
• Värv: must
• Värvimarkeering: sinine
• Piirangutega toode/piirangu info 2: ilma rõngastihendita
• Kaal (kg): 0,023
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Keermemõõt: M10x1.0
• Tootja: VERNET

• Anduritüüp: NTC-andur
• Montaaživiis: klemmitud
• Pistikukatte kuju: ristkülik
• Pistikkontaktide arv: 4
• Pistiku värv: must
• OE-numbri jaoks: 357919501A
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Nimetus: Andur,Jahutusvedeliku temp.
• Tootja: NRF

• Anduritüüp: NTC-andur
• Ühenduskeere: M10 x 1
• Tootja: ERA

• uus mudel:
• Välisläbimõõt [mm]: 20
• Ühenduste arv: 4
• Värv: must
• Värvimarkeering: sinine
• Piirangutega toode/piirangu info 2: ilma rõngastihendita
• Kaal (kg): 0,023
• Nimetus: SW 30 93 0616
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Piirangutega toode/piirangu info: Pistikuhülsi korpusega, koos tihenditega
• Pistikkontaktide arv: 3
• Pistikute teostus: Female
• Tootja: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Hulk: 1
• Kaal (kg): 0,048
• Ühenduste arv: 3
• Väliskeere [mm]: M22 x 1,5
• temperatuurivahemik alates [°C]: 84
• Temperatuurivahemik kuni [°C]: 95
• vajaminev tükihulk: 1
• Võtmekaugus: 29
• Värvimarkeering: must
• Üldine informatsioon: thermal switch;84-95C
• Tootja: VIKA

• Mootorikood: APE
• Keermemõõt: M22 x 1,5
• Võtmekaugus: 29
• Vastab originaalosa värvile: sinine, must
• Nimetus: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Tootja: MAX

• Kerenumber (VIN) kuni: 6K-X-448 600
• Anduritüüp: NTC-andur
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Pistikkontaktide arv: 4
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: MEY

• Ühenduste arv: 4
• Kaal (kg): 0,038
• Piirangutega toode/piirangu info: hoidevedruga, koos tihendiga
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: FEB
• Lisainfo: FE32510

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: APE
• Värv: roheline
• Vastab originaalosa värvile: must
• Tootja: FACET

• Mootorikood: APE
• Värv: roheline
• Vastab originaalosa värvile: must
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: EPS

• Kerenumber (VIN) kuni: F 6K-X-448 600
• Pistikkontaktide arv: 4
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Värv: must
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• OE-numbri jaoks: 078 919 501 C
• Tootja: TRUCKTEC

• Pistikkontaktide arv: 4
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Värv: roheline
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Ühenduste arv: 4
• Kaal (kg): 0,038
• Piirangutega toode/piirangu info: koos tihendiga, hoidevedruga
• Nimetus: SW 30 93 2510
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pinge [V]: 12
• Pistikkontaktide arv: 4
• Garantii: 3 aastat garantii
• Kaal (kg): 0,02
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: SKV GERMANY
• Nimetus: CE 17SKV345

• Keermemõõt: M20
• Pistikkontaktide arv: 4
• Piirangutega toode/piirangu info 2: ilma kaablita
• Pistikukatte kuju: ristkülik
• Installatsiooniläbimõõt (mm): 20
• Tootja: ERA

• Töötemperatuur alates [°C]: 95, 102
• Töötemperatuur kuni [°C]: 84, 91
• Keermemõõt: M22x1.5
• Anduritüüp: lahtine anduri ehitusviis
• Nimetus: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Tootja: VER

• Pistikkontaktide arv: 4
• Värv: roheline
• Piirangutega toode/piirangu info: koos tihendiga
• Versioon: IAM
• soovitava lisavarustuse artiklinumber: 0905458
• Võimsus [W]: 0,06
• Tootja: METZGER

• Ehitusaasta kuni: 10.2002
• Mootorikood: APE, AUA, ABD/AEX/AFH/AKV/ANX, APQ/AQQ/AUB
• Pistikkontaktide arv: 2
• Pistikukatte kuju: ristkülik
• Tootja: DELPHI
• Nimetus: DE TS10321

• uus mudel:
• Välisläbimõõt [mm]: 20
• Ühenduste arv: 4
• Värv: must
• Värvimarkeering: sinine
• Kaal (kg): 0,026
• Piirangutega toode/piirangu info: hoidevedruga, koos tihendiga
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mootorikood: APE
• Pistikkontaktide arv: 4
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Värv: must
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Läbimõõt [mm]: 25
• Pikkus (mm): 42
• Kaal (kg): 0,03
• Piirangutega toode/piirangu info: koos tihendiga
• OE-numbri jaoks: 6U0 919 501 B
• Värvimarkeering: sinine
• Pistikkontaktide arv: 4
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mootorikood: APE
• Värv: roheline
• Vastab originaalosa värvile: sinine
• Tootja: FACET

• Mootorikood: APE
• Värv: roheline
• Vastab originaalosa värvile: sinine
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: EPS

• Kaal (kg): 0,017, 0,027
• Piirangutega toode/piirangu info: koos tihendiga
• OE-numbri jaoks: 059 919 501 A
• Värvimarkeering: roheline
• Vedrukuju: Kinnitusvedru
• Pistikkontaktide arv: 4
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pistikkontaktide arv: 4
• Korpusevärv: sinine
• Vastab originaalosa värvile: roheline, sinine
• Piirangutega toode/piirangu info: koos tihendiga
• Võimsus [W]: 0,06
• Tootja: METZGER

• uus mudel:
• Välisläbimõõt [mm]: 20
• Ühenduste arv: 4
• Värv: must
• Värvimarkeering: sinine
• Kaal (kg): 0,026
• Piirangutega toode/piirangu info: hoidevedruga, koos tihendiga
• Nimetus: SW 32 93 9142
• Tootja: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• vajaminev tükihulk: 1
• Kerenumber (VIN) kuni: 6K-TR099 000
• Lülituspunkt [°C]: 84
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Kerenumber (VIN) alates: 6K-X-400 000
• Kerenumber (VIN) kuni: 6K-X-499 999
• Kasutuspinge [V]: 12
• Lülitamispunkt alates [°C]: 70, 77
• Lülituspunkt kuni [°C]: 75, 82
• Võtmekaugus: 29
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Värv: must
• Keermemõõt: M22 x 1,5
• Pistikkontaktide arv: 3
• Nimetus: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Tootja: MEY

• Lülituspunkt [°C]: 84
• Lülitamispunkt alates [°C]: 102
• Lülituspunkt kuni [°C]: 91
• Värvimarkeering: must
• Piirangutega toode/piirangu info: koos tihendiga
• Võtmekaugus: 29
• Pistikkontaktide arv: 3
• Tootja: METZGER

• Keermemõõt: M22 x 1,5
• Võtmekaugus: 29
• Pistikkontaktide arv: 3
• Lülitamispunkt alates [°C]: 102, 95
• Lülituspunkt kuni [°C]: 90, 97
• Tootja: ERA

• Välisläbimõõt [mm]: 20
• Kaal (kg): 0,02
• Ühenduste arv: 4
• Värv: must
• vajaminev tükihulk: 1
• Üldine informatsioon: coolant temperature sensor
• Tootja: BORSEHUNG

• Kerenumber (VIN) alates: 6K-X-400 000
• Kerenumber (VIN) kuni: 6K-X-499 999
• Kasutuspinge [V]: 12
• Lülitamispunkt alates [°C]: 84, 91
• Lülituspunkt kuni [°C]: 95, 102
• Võtmekaugus: 29
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Värv: must
• Keermemõõt: M22 x 1,5
• Pistikkontaktide arv: 3
• Nimetus: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Tootja: MEY

• Mootorikood: APE
• Värv: kollane
• Vastab originaalosa värvile: kollane, sinine, must
• Tootja: FACET

• Mootorikood: APE
• Värv: kollane
• Vastab originaalosa värvile: kollane, sinine, must
• Nimetus: ANDUR,JAHUTUSVEDELIKU TEMP.
• Tootja: EPS

• Hulk: 1
• Välisläbimõõt [mm]: 20
• Kaal (kg): 0,02
• Ühenduste arv: 4
• Värv: roheline
• vajaminev tükihulk: 1
• Üldine informatsioon: coolant temperature sensor
• Tootja: BORSEHUNG

• Hulk: 1
• Värv: must (3x)
• Üldine informatsioon: temperature switch
• Tootja: BORSEHUNG

• Pikkus (mm): 29
• Kõrgus (mm): 45
• Kaal (kg): 0,073
• Keermemõõt: M22x1,5
• Lülituspunkt [°C]: 102, 85
• Värv: must
• Lüliti: koos topelt termolülitiga
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 3
• Lülitamispunkt alates [°C]: 102
• Lülituspunkt kuni [°C]: 85
• Tootja: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Ehitusaasta kuni: 10.2002
• Mootorikood: APE, AUA, ABD/AEX/AFH/AKV/ANX, APQ/AQQ/AUB
• Keermemõõt: M22*1.5
• Võtmekaugus: S29
• Pistikkontaktide arv: 3
• Pistikukatte kuju: ristkülik
• Tootja: DELPHI

• Pistikkontaktide arv: 3
• Lülitamispunkt alates [°C]: 95
• Lülituspunkt kuni [°C]: 84
• Tootja: FAE

• Mootorikood: APE
• Keermemõõt: M22x1,5
• Võtmekaugus: 29
• Vastab originaalosa värvile: sinine, must
• Nimetus: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Tootja: EPS

• Läbimõõt [mm]: 25
• Pikkus (mm): 50
• Kaal (kg): 0,02, 0,2
• Piirangutega toode/piirangu info: koos tihendiga
• OE-numbri jaoks: 059 919 501
• Vedrukuju: Kinnitusvedru
• Pistikkontaktide arv: 4
• Pistikukatte kuju: nurgeline
• Tootja: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.