• Kogus pakendis: 10
• Inner Diameter [mm]: 28.5
• Sealing Ring Diameter [mm]: 28.5
• Thickness [mm]: 3.8
• Shape: O-Ring
• Tootja: TOPRAN HANS PRIES

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Material: Plastic, Aluminium
• Core Length [mm]: 650
• Core Width [mm]: 402
• Core Depth [mm]: 27
• Tootja: JP GROUP
• Lisainfo: Radiator, engine cooling

• Nimetus: Radiator
• Kvaliteediklass: ZJ

Lisainfo: A3, 13- (kvaliteediklass Z)

• Sõidukivarustus: sõidukitele koos/ilma kliimaseade
• Ehitusaasta alates: 05.2016
• Netosügavus [mm]: 22
• Netopikkus [mm]: 650
• Netolaius [mm]: 395
• Radiaatori tüüp: Jahutusribid joodetud
• Materjal veekamber (radiaator): Plastik
• Tehniline informatsioon: quick connection inlet/outlet
• Nimetus: Radiator
• Kvaliteediklass: PJ

Lisainfo: A3, 13- (kvaliteediklass PJ)

• Kogus pakendis: 10
• Thickness [mm]: 3.8
• Outer Diameter [mm]: 28.5
• Material: Rubber
• Tootja: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: Peamine paisupaak
• Kogus pakendis: 25
• Inner Diameter [mm]: 28.3
• Outer Diameter [mm]: 32.1
• Thickness [mm]: 3.9
• Shape: O-Ring
• Tootja: ELRING

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)

• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Radiator type: Brazed cooling fins
• Core Length [mm]: 650
• Core Width [mm]: 98
• Core Depth [mm]: 32
• Tootja: ABAKUS LORO
• Lisainfo: ABA003-017-0060

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Core Length [mm]: 650
• Core Width [mm]: 98
• Core Depth [mm]: 32
• Fabrication Number: CNG-AU-027
• Radiator type: Brazed cooling fins
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Supplementary Article/Info 2: without expansion tank, without frame
• Charge Type: for vehicles with water-cooled charge air cooler
• Transmission Type: Manual Transmission, Automatic Transmission
• Tootja: NTY

Vehicle Equipment: for vehicles with air conditioning, for vehicles without air conditioning

• Core Length [mm]: 650
• Core Width [mm]: 322
• Core Depth [mm]: 23
• Heating/Cooling: for vehicles with auxiliary cooler
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Lisainfo: Radiator, engine cooling

• Radiaatori tüüp: Jahutusribid mehaaniliselt ühendatud
• Netopikkus [mm]: 322
• Netolaius [mm]: 650
• Netosügavus [mm]: 23
• Tootja: JPN

• Radiator type: Mechanically jointed cooling fins
• Core Depth [mm]: 23
• Core Length [mm]: 650
• Core Width [mm]: 416
• Inlet Ø [mm]: 33
• Outlet Ø [mm]: 33
• Tootja: TYC OŒWIETLENIE

• Core Depth [mm]: 22
• Core Length [mm]: 650
• Core Width [mm]: 327
• General Information: radiator; pipe enlarging
• Tootja: VIKA

• Ehitusaasta alates: 08.2018
• Kliimatsoonid: mitte kuuma kliimavööndi jaoks
• PR-numbri jaoks: 1D0, 1M7, 9AK, KH6, 8Z4, 8Z5, 9AC
• Plokieraldus:
• Ehitusaasta kuni: 05.2016
• Material: Aluminium
• Core Length [mm]: 650
• Core Width [mm]: 322
• Core Depth [mm]: 23
• Radiator type: Mechanically jointed cooling fins
• Tootja: NRF
• Lisainfo: 650*310*24

Sõidukivarustus: Kliimaseadmega sõidukile, sõidukitele ilma kliimaseadmeta, sõidukitele ilma haakeseadmeta

• Radiator type: Brazed cooling fins
• Core Depth [mm]: 32
• Core Length [mm]: 650
• Core Width [mm]: 328
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Tootja: TYC

• Sõidukivarustus: sõidukitele koos/ilma kliimaseade
• Ehitusaasta alates: 04.2016
• Netosügavus [mm]: 16
• Netopikkus [mm]: 648
• Netolaius [mm]: 298
• Radiaatori tüüp: Jahutusribid joodetud
• Materjal veekamber (radiaator): Plastik
• Tehniline informatsioon: quick connection inlet/outlet
• Kvaliteediklass: PJ
• Nimetus: Radiator

• Ehitusaasta kuni: 05.2016
• Kliimatsoonid: mitte kuuma kliimavööndi jaoks
• Küte/Jahutus: Lisaradiaator
• PR-numbri jaoks: 9AK, KH6, 1D0, 8Z4, 8Z5, 9AC
• Plokieraldus:
• Ehitusaasta alates: 08.2018
• Material: Aluminium
• Core Length [mm]: 650
• Core Width [mm]: 98
• Core Depth [mm]: 32
• Radiator type: Brazed cooling fins
• Tootja: NRF

Sõidukivarustus: Kliimaseadmega sõidukile, sõidukitele ilma haakeseadmeta, sõidukitele ilma kliimaseadmeta

• Ehitusaasta kuni: 05.2016
• Kliimatsoonid: mitte kuuma kliimavööndi jaoks
• PR-numbri jaoks: 9AK, KH6, 1D0, 8Z4, 8Z5, 9AC
• Plokieraldus:
• Ehitusaasta alates: 08.2018
• Netopikkus [mm]: 981
• Netolaius [mm]: 650
• Netosügavus [mm]: 32
• Tootja: JPN

Sõidukivarustus: Kliimaseadmega sõidukile, sõidukitele ilma haakeseadmeta, sõidukitele ilma kliimaseadmeta

• Sõidukivarustus: sõidukitele koos/ilma kliimaseade
• Ehitusaasta alates: 04.2016
• Netosügavus [mm]: 22
• Netopikkus [mm]: 650
• Netolaius [mm]: 328
• Radiaatori tüüp: Jahutusribid joodetud
• Materjal veekamber (radiaator): Plastik
• Tehniline informatsioon: quick connection inlet/outlet
• Nimetus: Radiator
• Kvaliteediklass: PJ

• Core Length [mm]: 651
• Core Width [mm]: 407
• Core Depth [mm]: 24
• Radiator type: Brazed cooling fins
• Inlet Ø [mm]: 32.3
• Outlet Ø [mm]: 32.3
• Weight [kg]: 2.522
• Packaging length [cm]: 81
• Packaging width [cm]: 49
• Packaging height [cm]: 15
• Tootja: AKSDASIS

• Cooling fins material: Aluminium
• Core Depth [mm]: 23
• Core Length [mm]: 650
• Core Width [mm]: 322
• Radiator type: Mechanically jointed cooling fins
• Water Tank Material (radiator): Plastic

Technical Information: Install in Minutes! Box includes all extras like O-rings, clips, and washers

• Kliimatsoonid: mitte kuuma kliimavööndi jaoks
• PR-numbri jaoks: 9AK, KH6, 1D8, 1M6, 8Z4, 8Z5
• Material: Aluminium
• Core Length [mm]: 650
• Core Width [mm]: 416
• Core Depth [mm]: 23
• Version: Alternative
• Radiator type: Mechanically jointed cooling fins
• Tootja: NRF

Sõidukivarustus: Kliimaseadmega sõidukile, Sõidukitele koos haakeseadmega

• Cooling fins material: Aluminium
• Core Depth [mm]: 23
• Core Length [mm]: 650
• Core Width [mm]: 322
• Inlet Ø [mm]: 32.5
• Outlet Ø [mm]: 32.5
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Info 2: without expansion tank
• Supplementary Article/Supplementary Info: without gasket/seal
• Water Tank Material (radiator): Plastic
• Tootja: NISSENS
• Lisainfo: VOLKSWAGEN GOLF VII SPORTSVAN (AM1) (14-) 1.6 TDI

Technical Information: Radiator with 5mm system-Advanced technology with higher power effect

• Cooling fins material: Aluminium
• Core Depth [mm]: 22
• Core Length [mm]: 647
• Core Width [mm]: 310
• Inlet Ø [mm]: 32.5
• Outlet Ø [mm]: 32.5
• Radiator type: Brazed cooling fins
• Supplementary Article/Info 2: without cap, without expansion tank
• Supplementary Article/Supplementary Info: without gasket/seal
• Water Tank Material (radiator): Plastic
• Tootja: NISSENS
• Lisainfo: AUDI A 3 / S 3 (8V) (12-) 1.6 TDI

• Fitting Position: Left
• Core Depth [mm]: 0
• Core Length [mm]: 0
• Core Width [mm]: 0
• General Information: radiator; lead welding
• Tootja: VIKA

• Core Length [mm]: 620
• Core Width [mm]: 407
• Core Depth [mm]: 16
• Inlet Ø [mm]: 22
• Outlet Ø [mm]: 22
• Radiator type: Brazed cooling fins
• Packaging length [cm]: 82
• Packaging width [cm]: 52
• Packaging height [cm]: 17
• Weight [kg]: 2
• Tootja: AKSDASIS

• Mootorikood: DDYA, DGTE
• Sõidukivarustus: Kliimaautomaatikaga sõidukile
• Käigukasti liik: Käigukast 6 käiku
• Kliimatsoonid: kuuma kliimavööndi jaoks
• Core Width [mm]: 398
• Core Length [mm]: 620
• Core Depth [mm]: 16
• Radiator type: Brazed cooling fins
• Technical Information: Aluminium core with plastyic tanks
• Nimetus: MM BM1663
• Tootja: MAGNETI MARELLI

• Ehitusaasta alates: 06.2016
• Ehitusaasta kuni: 07.2018
• Küte/Jahutus: Lisaradiaator
• Plokieraldus:
• Material: Aluminium
• Core Length [mm]: 620
• Core Width [mm]: 398
• Core Depth [mm]: 16
• Supplementary Article/Info 2: with seal ring
• Radiator type: Brazed cooling fins
• Tootja: NRF
• Lisainfo: 620*397*16

Sõidukivarustus: Kliimaseadmega sõidukile, sõidukitele ilma haakeseadmeta, sõidukitele ilma kliimaseadmeta, Sõidukitele koos haakeseadmega Kliimatsoonid: mitte kuuma kliimavööndi jaoks, kuuma kliimavööndi jaoks PR-numbri jaoks: 9AK, KH6, 1D0, 8Z4, 8Z5, 8Z6, 8Z9, 9AC, 1D8, 1M6, 1M7

• Kliimatsoonid: mitte kuuma kliimavööndi jaoks
• PR-numbri jaoks: 9AK, KH6, 1D8, 1M6, 8Z4, 8Z5
• Material: Aluminium
• Core Length [mm]: 650
• Core Width [mm]: 417
• Core Depth [mm]: 24
• Radiator type: Brazed cooling fins
• Tootja: NRF
• Lisainfo: 650*402*27

Sõidukivarustus: Kliimaseadmega sõidukile, Sõidukitele koos haakeseadmega

• Cooling fins material: Aluminium
• Core Depth [mm]: 32
• Core Length [mm]: 648
• Core Width [mm]: 96
• Inlet Ø [mm]: 22.3
• Outlet Ø [mm]: 22.3
• Radiator type: Brazed cooling fins
• Supplementary Article/Info 2: without expansion tank
• Supplementary Article/Supplementary Info: with gaskets/seals
• Water Tank Material (radiator): Plastic
• Tootja: NISSENS
• Lisainfo: VOLKSWAGEN GOLF VII SPORTSVAN (AM1) (14-) 1.6 TDI

• Core Depth [mm]: 0
• Core Length [mm]: 0
• Core Width [mm]: 0
• General Information: charge air cooler
• Tootja: VIKA

• Core Depth [mm]: 0
• Core Length [mm]: 0
• Core Width [mm]: 0
• Surface: Brazed
• General Information: radiator; lead welding
• Tootja: VIKA

• Netosügavus [mm]: 32
• Netopikkus [mm]: 650
• Netolaius [mm]: 98
• Radiaatori tüüp: Jahutusribid joodetud
• Materjal veekamber (radiaator): Plastik
• Tehniline informatsioon: quick connection inlet/outlet
• Kvaliteediklass: PJ
• Nimetus: Radiator

• Radiator type: Mechanically jointed cooling fins
• Core Length [mm]: 650
• Core Width [mm]: 322
• Core Depth [mm]: 23
• Water Tank Material (radiator): Plastic
• Packaging height [cm]: 11.5
• Net Weight [g]: 2,008
• Packaging width [cm]: 45
• Packaging length [cm]: 83.5
• Nimetus: MH CR2057000S
• Tootja: MAHLE

General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.

• PR-numbri jaoks: 1D8, 1M6, 8Z4, 8Z5, 8Z6, 8Z9, 9AK, KH6
• Radiator type: Mechanically jointed cooling fins
• Core Length [mm]: 650
• Core Width [mm]: 416
• Core Depth [mm]: 24
• Water Tank Material (radiator): Plastic
• Packaging height [cm]: 13.2
• Net Weight [g]: 2,679
• Packaging width [cm]: 50
• Packaging length [cm]: 82.5
• Tootja: MAHLE

Sõidukivarustus: Kliimaseadmega sõidukile, Elektr.lisasoojendusega sõidukile Kliimatsoonid: kuuma kliimavööndi jaoks, mitte kuuma kliimavööndi jaoks General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.

• Ehitusaasta alates: 06.2016
• Ehitusaasta kuni: 07.2018
• Mootorikood: DDYA, DGTE
• Küte/Jahutus: Lisaradiaator
• Core Width [mm]: 388
• Core Length [mm]: 620
• Core Depth [mm]: 16
• Material: Aluminium
• Housing Type: Synthetic Material Housing
• Inlet Ø [mm]: 22
• Outlet Ø [mm]: 22
• Heating/Cooling: for vehicles without oil cooler
• Supplementary Article/Info 2: without coolant regulator, without cap
• Radiator type: Brazed cooling fins
• Weight [kg]: 3.82
• Tootja: VALEO

PR-numbri jaoks: 1D0, 1D8, 1M6, 1M7, 8Z4, 8Z5, 8Z6, 8Z9, 9AC, 9AK, KH6

• Ehitusaasta kuni: 07.2018
• Plokieraldus:
• Cooling fins material: Aluminium
• Core Depth [mm]: 23
• Core Length [mm]: 651
• Core Width [mm]: 415
• Radiator type: Mechanically jointed cooling fins
• Water Tank Material (radiator): Plastic

Sõidukivarustus: sõidukitele ilma kliimaseadmeta, Kliimaseadmega sõidukile

• Cooling fins material: Aluminium
• Core Depth [mm]: 23
• Core Length [mm]: 650
• Core Width [mm]: 399
• Inlet Ø [mm]: 32.5
• Outlet Ø [mm]: 32.5
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Info 2: without expansion tank
• Water Tank Material (radiator): Plastic

Technical Information: Install in Minutes! Box includes all extras like O-rings, clips, and washers

• Ehitusaasta kuni: 05.2016
• Weight [g]: 910
• Core Length [mm]: 648
• Core Width [mm]: 115
• Core Depth [mm]: 27
• Gross Weight [g]: 1,420
• Nimetus: DN DRM02042
• Tootja: DENSO

• Cooling fins material: Aluminium
• Core Depth [mm]: 22
• Core Length [mm]: 650
• Core Width [mm]: 438
• Inlet Ø [mm]: 32.5
• Outlet Ø [mm]: 32.5
• Radiator type: Brazed cooling fins
• Supplementary Article/Info 2: without cap, without expansion tank
• Supplementary Article/Supplementary Info: with gaskets/seals
• Water Tank Material (radiator): Plastic
• Tootja: NISSENS
• Nimetus: NI 606218
• Lisainfo: SEAT LEON (5F) (12-) 1.2 TSI

• Weight [g]: 1,880
• Core Length [mm]: 650
• Core Width [mm]: 420
• Core Depth [mm]: 27
• Gross Weight [g]: 3,560
• Nimetus: DN DRM32048
• Tootja: DENSO

• Cooling fins material: Aluminium
• Core Depth [mm]: 22
• Core Length [mm]: 650
• Core Width [mm]: 396
• Inlet Ø [mm]: 32.5
• Outlet Ø [mm]: 32.5
• Radiator type: Brazed cooling fins
• Supplementary Article/Info 2: without cap, without expansion tank
• Supplementary Article/Supplementary Info: with gaskets/seals
• Water Tank Material (radiator): Plastic
• Tootja: NISSENS
• Nimetus: NI 65303
• Lisainfo: VOLKSWAGEN PASSAT B8 (3G2, 3G5) (14-) 1.4 TSI

Technical Information: Radiator with 5mm system-Advanced technology with higher power effect

• Ehitusaasta alates: 11.2016
• Weight [g]: 2,520
• Core Length [mm]: 620
• Core Width [mm]: 391
• Core Depth [mm]: 18
• Gross Weight [g]: 4,200
• Tootja: DENSO
• Nimetus: DN DRM02018

• Ehitusaasta alates: 06.2016
• Ehitusaasta kuni: 07.2018
• Mootorikood: DDYA, DGTE
• Sõidukivarustus: Sõidukitele koos haakeseadmega
• Core Width [mm]: 411
• Core Length [mm]: 650
• Core Depth [mm]: 24
• Material: Aluminium
• Inlet Ø [mm]: 33
• Outlet Ø [mm]: 33
• Heating/Cooling: for vehicles without oil cooler
• Radiator type: Mechanically jointed cooling fins
• Weight [kg]: 3.54
• Tootja: VALEO
• Lisainfo: 735558 VALEO

PR-numbri jaoks: 1D0, 1D8, 1M6, 1M7, 8Z4, 8Z5, 8Z6, 8Z9, 9AC, 9AK, KH6

• Nimetus: Radiator
• Kvaliteediklass: Q

Lisainfo: "Tootja: OEM/OES (VALEO)
A3, 13-
(kvaliteediklass: Q)"