Tootekategooriad
Filter Pidurid Šassii Roolimine Jahutus/kliima Elektrisüsteem Lisad Jõuülekanne Väljalaskesüsteem Kere Süüte-/eelsüütesüsteem Mootor Klaasid/klaasipuhastus Valgustus Kütusesüsteemi seadmed Kabiinivarustus HooldusToode
Kirjeldus
Laoseis
Hind
(km-ga)

- Värvimarkeering: hall
- Pistikkontaktide arv: 2
- Tootja: JP GROUP
-
Lisainfo: Sender for water temperature gauge,
2 pins

- Lambda andur: Diagnoosisond
- Ülekandeliinide arv: 4
- pikkus üle kõige (mm): 750
-
Tootja: JP GROUP A/
S - Lisainfo: Lambda sensor

- Keermemõõt: M 10x1
- Korpusevärv: sinine
- Tootja: FAE

-
Pistikukatte kuju: D-
kuju - Rakendustüüp: hüdrauliline
- Värvimarkeering: roheline
- Keermemõõt: M 10
- Keerme samm (mm): 1
- Pistikkontaktide arv: 1
-
Lülitusulatus (bar): 0,
3 - 0, 6 - Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Tootja: TOPRAN HANS PRIES
Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

- OE-numbri jaoks: 95510612500
- Tootja: KAMOKA

-
Seerianumber: ECC-
AU- 003 - Keermemõõt: M10x1
- Võtmekaugus: 24
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Pistiku värv: roheline
- Pistikkontaktide arv: 1
- Tootja: NTY
-
Nimetus: NTY ECC-
AU- 003
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.

- Üldine informatsioon: temperature sensor
- Tootja: VIKA

- Värvimarkeering: hall
-
Seerianumber: ECT-
VW- 000 - Tootja: NTY
-
Nimetus: NTY ECT-
VW- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.

-
Kaal (kg): 0,
015 - Ühenduste arv: 2
- Kruvipikkus kruvipea all [mm]: 20
- Värv: hall
- Värvimarkeering: hall
- Üldine informatsioon: temperature sensor; grey; 2 pins
- Tootja: VIKA

-
Kaal (kg): 0,
015 - Ühenduste arv: 2
- Kruvipikkus kruvipea all [mm]: 20
- Värv: must
- Värvimarkeering: hall
- Üldine informatsioon: temperature sensor; black
- Tootja: VIKA

-
Pistikukatte kuju: ovaalne,
D- kuju - Värvimarkeering: hall
-
Anduritüüp: NTC-
andur - Pistikkontaktide arv: 2
- soovitatav remondilaiendus, vaata lisavarustuse nimekirja:
- Tootja: TOPRAN
Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

- Kogus pakendis: 3
- Ühenduste arv: 2
- Tootja: 3RG

- Surve (bar): 6
- Korpusevärv: roheline
-
Keermemõõt: M10×1-
6g - Läbimõõt [mm]: 24
- Võtmekaugus: 24
- Pistikkontaktide arv: 1
- Tootja: DELPHI
- Nimetus: DE SW90024
- Lisainfo: SW90024

- Mootorikood: BAH
- Värv: roheline
-
Surve (bar) kuni: 0,
6 -
Surve alates (bar): 0,
3 -
Surve (bar): 0,
5 - Keermemõõt: M10x1
- Võtmekaugus: 24
- Tootja: FACET

-
Lülitusrõhk [bar]: 0,
5 - Keermemõõt: M10x1.0
- Anduritüüp: lahtine anduri ehitusviis
- Tootja: VERNET

- Mootorikood: BAH
- Värv: roheline
-
Surve (bar) kuni: 0,
6 -
Surve alates (bar): 0,
3 -
Surve (bar): 0,
5 - Keermemõõt: M10x1
- Võtmekaugus: 24
- Nimetus: EP 1.800.139
- Tootja: EPS

-
Anduritüüp: NTC-
andur - Montaaživiis: klemmitud
-
Pistikukatte kuju: D-
kuju - Pistikkontaktide arv: 2
- OE-numbri jaoks: 06A919501
- Piirangutega toode/piirangu info 2: koos osadega
- Tootja: NRF

-
Piirangutega toode/piirangu info: Pistikuhülsi korpusega,
koos tihenditega - Pistikkontaktide arv: 3
- Pistikute teostus: Female
- Tootja: ABAKUS LORO
Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

- Keermemõõt: 20 mm
- Pins'ide arv: 2
- Tootja: VERNET
- Lisainfo: WS2607

- Üldine informatsioon: oil pressure switch
- Tootja: BORSEHUNG

- OE-numbri jaoks: 06A 919 501
- Tootja: TRUCKTEC

- Piirangutega toode/piirangu info 2: koos klemmihoidjaga
- Pistikkontaktide arv: 2
- Piirangutega toode/piirangu info: koos tihendiga
- Tootja: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

- Mootorikood: BAH
- Värv: hall
-
tootekoodile: 26.0015K,
7.3278K, 7.7946 - Tootja: FACET

- Keermemõõt: M 10x1
- Korpusevärv: must
-
Surve (bar): 1,
4 - Tootja: FAE

- Keermemõõt: M20
- Pistikkontaktide arv: 2
- Korpusevärv: hall
- Pistikukatte kuju: ovaalne
- Tootja: ERA

- Pistikkontaktide arv: 2
- Pistiku värv: must
- Pistikukatte kuju: ristkülik
-
Keermemõõt: M 12x1,
5 - Võtmekaugus: 19
- OE-numbri jaoks: 13621711371
- Tootja: MEAT&DORIA

- Mootorikood: BAH
- Värv: hall
-
tootekoodile: 1.660.015K,
1.830.278K, 1.879.946 - Nimetus: EP 1.830.278
- Tootja: EPS
-
Lisainfo: 1-
830- 278

- Keermemõõt: M 10 x 1
-
Lülitusulatus (bar): 0,
3- 0, 6 - Tootja: VEMO GERMANY
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

- Mootorikood: BAH
- Värv: sinine
- Rakendustüüp: mehhaaniliselt
- Tootja: FACET

- Mootorikood: BAH
- Värv: sinine
- Rakendustüüp: mehhaaniliselt
- Nimetus: EP 1.810.220
- Tootja: EPS

- Korpusevärv: hall
- Pistikkontaktide arv: 2
- Võtmekaugus: 0
- Tootja: DELPHI
- Nimetus: DE TS10278

- Üldine informatsioon: temperature sensor
- Tootja: VIKA

- Versioon: 2
-
Pistikukatte kuju: D-
kuju - Materjal: Plastik
- Pistikkontaktide arv: 2
- Pistikute teostus: Female
-
Anduritüüp: NTC-
andur - Võtmekaugus: 0
- Keermemõõt: 0
- Tootja: NISSENS
Tehniline informatsioon: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

- Montaaživiis: pistetud
- Pinge [V]: 12
- Piirangutega toode/piirangu info: koos tihendiga
- Värv: must
-
Anduritüüp: NTC-
andur - Pistikkontaktide arv: 2
- Piirangutega toode/piirangu info 2: koos turvarõngaga
-
Vastab originaalosa värvile: must,
hall - Installatsiooni sügavus (mm): 20
- Monteerimist/demonteerimist peab tegema spetsialist!:
-
SVHC: 7439-
92- 1; plii - Tootja: HELLA
- Nimetus: HE 6PT009309331
Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

- Pistikkontaktide arv: 3
- Garantii: 3 aastat garantii
-
Kaal (kg): 0,
04 - Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Nimetus: CE 17SKV551
- Tootja: ESEN SKV

- Kruvipikkus kruvipea all [mm]: 20
-
Kaal (kg): 0,
015 - Ühenduste arv: 2
- Värvimarkeering: hall
- Üldine informatsioon: coolant temperature sensor
- Tootja: BORSEHUNG

- Pistikkontaktide arv: 3
- Tootja: ENERGY

- Pistikkontaktide arv: 2
-
Kaal (kg): 0,
3 - pakendi pikkus [cm]: 12
- pakendi laius [cm]: 8
- pakendi kõrgus [cm]: 6

- Pistikkontaktide arv: 2
- Pistikute teostus: Lamepistik
- Tootja: ABAKUS
Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

- Piirangutega toode/piirangu info 2: ilma kaablita
- Pistiku värv: must
-
Seerianumber: ESS-
VW- 000 - Tootja: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.

- Pistikkontaktide arv: 3
- Garantii: 3 aastat garantii
-
Kaal (kg): 0,
05 - Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Tootja: SKV GERMANY
- Nimetus: CE 17SKV552

- Pistikkontaktide arv: 2
- Pistikukatte kuju: ristkülik
- Pistiku värv: must
-
Väliskeere [mm]: M 12x1,
5 - Tootja: ERA

- Anduritüüp: Hallsensor
- Pistikkontaktide arv: 3
-
Korpusevärv: sinine,
must - Tootja: ABAKUS
Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

- OE-numbri jaoks: 03D 907 601
- Pikkus (mm): 60
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
-
Seerianumber: ECP-
AU- 004 - Tootja: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.

-
Keermemõõt: M12x1,
5 - Pistikkontaktide arv: 2
- Pistikukatte kuju: ristkülik
- Pistiku värv: must
- Tootja: FAE

- Värvimarkeering: hall
- Vastab originaalosa värvile: must
- Pistikkontaktide arv: 2
- Piirangutega toode/piirangu info: koos tihendiga
- Versioon: IAM
-
soovitava lisavarustuse artiklinumber: 0899250,
0905513 -
Võimsus [W]: 0,
06 - Tootja: METZGER

- Ühenduste arv: 2
- Värvimarkeering: hall
- Kruvipikkus kruvipea all [mm]: 20
-
Kaal (kg): 0,
03 -
Piirangutega toode/piirangu info: koos tihendiga,
hoidevedruga - Nimetus: SW 30 92 9318
- Tootja: SWAG
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

- OE-numbri jaoks: 30907601
- Anduritüüp: Aktiivne andur
- Tootja: KAMOKA

- Pistikkontaktide arv: 2
- Piirangutega toode/piirangu info 2: ilma kaablita
-
Pistikukatte kuju: D-
kuju - Tootja: TOPRAN
Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

- Anduritüüp: Hallsensor
- Pistikkontaktide arv: 3
- Piirangutega toode/piirangu info 2: ilma kaablita
- OE-numbri jaoks: 090 307 601 E
- Tootja: ABAKUS LORO
Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

- Ehitusaasta alates: 04.2003
- Pistikkontaktide arv: 2
-
Pistikukatte kuju: D-
kuju - Piirangutega toode/piirangu info 2: ilma kaablita
- OE-numbri jaoks: 1205185
- Tootja: MEAT&DORIA

Tootja: MAGNETI MARELLI

-
Kaal (kg): 0,
48 - Ühenduste arv: 2
- Värv: must
- Üldine informatsioon: knock sensor
- Tootja: VIKA

- Käigukasti liik: Käigukast 5 käiku
- Pistikkontaktide arv: 3
- Garantii: 3 aastat garantii
-
Kaal (kg): 0,
03 - Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Nimetus: CE 17SKV553
- Tootja: ESEN SKV

- Pistikkontaktide arv: 3
- Tootja: ABAKUS
Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

- Värv: must
- Pistikkontaktide arv: 2
-
Kaal (kg): 0,
058 - Tootja: ERA

- OE-numbri jaoks: 036 906 433 A
- Värv: hall
- Anduritüüp: Aktiivne andur
- Tootja: KAMOKA

- Ehitusaasta kuni: 06.2006
-
Kõrgus (mm): 23,
9 - Anduritüüp: Hallsensor
- Ühenduste arv: 3
- Tootja: VERNET

- Pistikkontaktide arv: 3
-
Pistikukatte kuju: D-
kuju - Anduritüüp: Hallsensor
- Piirangutega toode/piirangu info 2: ilma kaablita
-
Installatsiooni sügavus (mm): 24,
3 - Kvaliteet: OE EQUIVALENT
- OE-numbri jaoks: 0986280432
- Tootja: MEAT&DORIA

- Ehitusaasta alates: 07.2006
- Pistikkontaktide arv: 3
- Garantii: 3 aastat garantii
-
Kaal (kg): 0,
03 - Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Tootja: SKV ESEN

- Ehitusaasta alates: 07.2006
- Tootja: NRF

- Ühenduste arv: 3
- Korpusevärv: hall
- Piirangutega toode/piirangu info 2: koos kaabliga
- Tootja: JP GROUP
-
Lisainfo: Sensor,
camshaft position

- tootmise kuupäev kuni: 19.06.2006
-
Pistikukatte kuju: D-
kuju - Pistikkontaktide arv: 3
- Piirangutega toode/piirangu info 2: ilma kaablita
- Tootja: TOPRAN
Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

- Üldine informatsioon: Transmission speed sensor
- Tootja: VIKA

-
Kõrgus (mm): 24,
4 - Anduritüüp: Hallsensor
- Ühenduste arv: 3
- Tootja: VERNET

- Mootorikood: BAH
- Ehitusaasta kuni: 06.2006
- Tootja piirang: KACO
- Tootja: FACET

- Ehitusaasta alates: 07.2006
- Kõrgus (mm): 20
- Anduritüüp: Hallsensor
- Ühenduste arv: 3
- Tootja: VERNET

- Pistikkontaktide arv: 3
-
Pistikukatte kuju: D-
kuju - Kinnitusaukude hulk: 1
- Piirangutega toode/piirangu info: koos tihendiga
- OE-numbri jaoks: 030907601E
- Tootja: DELLO AUTOMEGA

- Mootorikood: BAH
- Ehitusaasta kuni: 06.2006
- Tootja piirang: KACO
- Nimetus: EP 1.953.464
- Tootja: EPS
-
Lisainfo: 1-
953- 464

- Pinge [V]: 12
- Piirangutega toode/piirangu info: ilma trossideta
- Pistikkontaktide arv: 3
- Garantii: 3 aastat garantii
-
Kaal (kg): 0,
03 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Tootja: SKV GERMANY
- Nimetus: CE 17SKV278

-
Kaal (kg): 0,
02 - Laius (mm): 31
- Ühenduste arv: 3
- Pikkus (mm): 69
- Värv: must
- Piirangutega toode/piirangu info 2: koos kruviga
- vajaminev tükihulk: 1
- Üldine informatsioon: impulse sender; crackshaft; black
- Tootja: VIKA

- valikuliselt:
- Pistikkontaktide arv: 3
-
Installatsiooni sügavus (mm): 24,
5 -
Kaal (kg): 0,
02 - alternatiivne remondikomplekt: 550120
- Tootja: ERA

- Pistikkontaktide arv: 3
- Tootja: JPN

- Pistikkontaktide arv: 2
- Piirangutega toode/piirangu info 2: ilma kaablita
- Korpusevärv: must
- Tootja: FAE ELEKTRYKA

- Mootorikood: BAH
- Ehitusaasta alates: 07.2006
- Tootja: FACET

- vajaminev tükihulk: 1
- Pinge [V]: 12
- Pistikkontaktide arv: 3
- Anduritüüp: Hallsensor
- Piirangutega toode/piirangu info 2: ilma kaablita
- Korpusevärv: must
- Tootja: BREMI

- Pistikkontaktide arv: 2
- Korpusevärv: hall
- Tootja: FAE

- Läbimõõt [mm]: 26
- Pistikkontaktide arv: 2
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Vedrukuju: Kinnitusvedru
- Pikkus (mm): 20
- Korpusevärv: sinine
- Kõrgus (mm): 57
- Värv: hall
- Ühenduste arv: 2
- Tootja: VEMO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

- Mootorikood: BAH
- Korpusevärv: must
- Tootja: FACET

- Mootorikood: BAH
- Ehitusaasta alates: 07.2006
- Nimetus: EP 1.953.598
- Tootja: EPS

- Mootorikood: BAH
- Korpusevärv: must
- Nimetus: EP 1.957.144
- Tootja: EPS

- vajaminev tükihulk: 1
- Ehitusaasta alates: 07.2006
- Pinge [V]: 12
- Pistikkontaktide arv: 3
- Anduritüüp: Hallsensor
- Piirangutega toode/piirangu info 2: ilma kaablita
- Korpusevärv: hall
- Tootja: BREMI

- Pistikkontaktide arv: 2
- Värv: must
- Materjal: Plastik
- Tootja: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

- Anduritüüp: Hallsensor
- Montaaživiis: Kruviühendus
-
Kuju: D-
kuju - Ühenduste arv: 3
-
Installatsiooni sügavus (mm): 24,
3 - Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Tootja: NRF

- Mootorikood: BAH
- Pistikkontaktide arv: 3
- Tootja: DELPHI
-
Nimetus: DE SS10773-
12B1 - Kvaliteediklass: PJ
Lisainfo: "Tootja: DELPHI
BORA (1J2), 10.98-09
(kvaliteediklass: PJ)"

- Pikkus (mm): 60
- Laius (mm): 40
- Jämedus/Tugevus (mm): 22
- Ühenduste arv: 3
-
Kaal (kg): 0,
02 - Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Tootja: FEBI BILSTEIN
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

-
Lambda andur: Diagnoosisond,
Keere eelmääritud - Installatsiooni pool: pärast katalüsaatorit
-
Seerianumber: ESL-
AU- 007 - Tootja: NTY
-
Nimetus: NTY ESL-
AU- 007
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.

- Pinge [V]: 12
- Pistikkontaktide arv: 2
- Väändejõud [Nm]: 20
- Piirangutega toode/piirangu info 2: ilma kaablita
- Vastab originaalosa värvile: must
- Pistikute teostus: Lamepistik
- Pistikukatte kuju: ovaalne
- Monteerimist/demonteerimist peab tegema spetsialist!:
- Tootja: HELLA
- Nimetus: HE 6PG013114301
Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

-
Lambda andur: Diagnoosisond,
Keere eelmääritud -
Seerianumber: ESL-
SK- 000 - Tootja: NTY
-
Nimetus: NTY ESL-
SK- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.

- Tootja: BOSCH
- Nimetus: BS 0261231146

- Ehitusaasta kuni: 06.2006
- Pistikkontaktide arv: 3
- Tootja: DELPHI
-
Nimetus: DE SS10772-
12B1

- Ühenduste arv: 2
- Värv: must
-
Kaal (kg): 0,
48 - Tootja: FEBI BILSTEIN
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

- Pistikkontaktide arv: 2
- Nimetus: DE AS10169
- Tootja: DELPHI

- Ehitusaasta alates: 06.2006
- Pistikkontaktide arv: 3
- Tootja: DELPHI
- Nimetus: DE SS11170

- Värv: hall
- valikuliselt:
- Pistikkontaktide arv: 3
-
Installatsiooni sügavus (mm): 19,
5 -
Kaal (kg): 0,
024 - alternatiivne remondikomplekt: 550119
- Tootja: ERA

- Pikkus (mm): 60
- Laius (mm): 40
- Jämedus/Tugevus (mm): 22
- Ühenduste arv: 3
-
Kaal (kg): 0,
02 - Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Nimetus: SW 30 94 4382
- Tootja: SWAG
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

- Anduritüüp: Hallsensor
- Pistikkontaktide arv: 3
- Pinge [V]: 12
-
Pistikukatte kuju: D-
kuju - Piirangutega toode/piirangu info 2: ilma kaablita
- Tootja: VALEO
- Nimetus: VA 253802

- Anduritüüp: Hallsensor
- Pistikkontaktide arv: 3
-
Pistikukatte kuju: D-
kuju - Tootja: FAE

- Ehitusaasta alates: 04.2003
- Anduritüüp: Hallsensor
- Pistikkontaktide arv: 3
- Pinge [V]: 12
- Pistikukatte kuju: nurga all
- Piirangutega toode/piirangu info 2: koos kaabliga
- Tootja: VALEO
- Nimetus: VA 254038

- Mootorikood: BAH
- Tootja: FACET

- Pistikkontaktide arv: 3
- Korpusevärv: must
- Versioon: IAM
- Tootja: METZGER

- Ehitusaasta kuni: 06.2006
- Kinnitusaukude hulk: 1
- Pinge [V]: 12
-
Installatsiooni sügavus (mm): 23,
9 - Anduritüüp: Hallsensor
- Pistikkontaktide arv: 3
- Vastab originaalosa värvile: piimvalge
- Monteerimist/demonteerimist peab tegema spetsialist!:
- Tootja: HELLA
- Nimetus: HE 6PU009163491
Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

- Mootorikood: BAH
- Nimetus: EP 1.953.368
- Tootja: EPS

- Pistikkontaktide arv: 3
- Anduritüüp: Hallsensor
-
Pistikukatte kuju: D-
kuju - Tootja: VDO

- Lambda andur: Sond
- Ülekandeliinide arv: 4
- Tootja: KAMOKA

- Pistikkontaktide arv: 3
-
Pistikukatte kuju: D-
kuju - Pistiku värv: helehall
- Tootja: FAE

- Ehitusaasta alates: 07.2006
- Installatsiooni sügavus (mm): 20
- Anduritüüp: Hallsensor
- Pistikkontaktide arv: 3
- Piirangutega toode/piirangu info 2: koos kruviga
- Monteerimist/demonteerimist peab tegema spetsialist!:
-
SVHC: 7439-
92- 1; plii, 872- 50- 4; 1- Methyl- 2- pyrrolidone - Tootja: HELLA
- Nimetus: HE 6PU009167131
Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

Tootja: BOSCH

- Anduritüüp: Hallsensor
- Pistikkontaktide arv: 3
- Monteerimist/demonteerimist peab tegema spetsialist!:
- Nimetus: HE 6PU013122671
- Tootja: HELLA
Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

- Mootorikood: BAH
-
Kerenumber (VIN) kuni: 6L-
2- 000 001 - Pistikkontaktide arv: 2
- Värv: must
- Tootja: VDO

- Mootorikood: BAH
- Pistikkontaktide arv: 3
- Piirangutega toode/piirangu info 2: koos kaabliga
- Pistiku värv: valge
- Tootja: FAE

- Ehitusaasta alates: 07.2006
- Anduritüüp: Hallsensor
- Pistikkontaktide arv: 3
- Pistikukatte kuju: ovaalne
- Piirangutega toode/piirangu info 2: ilma kaablita
- Tootja: VALEO

- Ehitusaasta kuni: 06.2006
- Tootja: BOSCH

- Värv: hall
- Pistikkontaktide arv: 3
-
Installatsiooni sügavus (mm): 19,
5 -
Kaal (kg): 0,
024 - Tootja: ERA

- Mootorikood: BAH
- Anduritüüp: Hallsensor
- Tootja: FAE

- Ehitusaasta alates: 07.2006
- Tootja: BOSCH

- Installatsiooni pool: pärast katalüsaatorit
- Pistikkontaktide arv: 4
- Nominaalpinge (V): 12
-
Lambda andur: Titaanandur,
soojendatud -
Pistikukatte kuju: D-
kuju - Kaablipikkus (mm): 730
- pikkus üle kõige (mm): 757
- Võtmekaugus: 22
- Keermemõõt: M 18
-
Keerme samm (mm): 1,
5 - Piirangutega toode/piirangu info: Kaablisidemega
- Õlitus: koos rasvmäärdega
- Täiskomplekt:
- Tootja: TOPRAN HANS PRIES
Piirangutega toode/piirangu info 2: koos plastiksokliga, koos kuumakaitsetoruga, koos paigaldusjuhisega Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

- Pinge [V]: 12
- Pistikkontaktide arv: 2
- Väändejõud [Nm]: 20
- Piirangutega toode/piirangu info 2: ilma kaablita
- Vastab originaalosa värvile: must
- Pistikute teostus: Lamepistik
- Pistikukatte kuju: ovaalne
- Hulk: 1
- Monteerimist/demonteerimist peab tegema spetsialist!:
- Nimetus: HE 6PG009108561
- Tootja: HELLA
SVHC: 1317-36-8; Lead monoxide (lead oxide), 12060-00-3; Lead titanium trioxide, 7439-92-1; plii Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

- Lambda andur: Diagnoosisond
- Installatsiooni pool: pärast katalüsaatorit
- Ehitusaasta alates: 04.2003
- Pikkus (mm): 550
- tehnilise informatsiooni number: Universal 77015
- Tootja: FAE

- Installatsiooni pool: ees
- Lambda andur: Diagnoosisond
- Pikkus (mm): 940
- Ühenduste arv: 4
- Tootja: VERNET

- Lambda andur: Titaanandur
- pikkus üle kõige (mm): 750
- Ülekandeliinide arv: 4
- Garantii: 5 aastat garantii
-
Üldine informatsioon: Sold in Hueco brand:
printing and packaging - Nimetus: HU 135332
- Tootja: HITACHI

- Mootorikood: BAH
-
Installatsiooni pool: pärast katalüsaatorit,
katalüsaatori ees - Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
- Pistiku värv: pruun
- OE-numbri jaoks: 036 906 265 H
- Pikkus (mm): 625
-
Keermemõõt: M18 x 1,
5 -
Pistikukatte kuju: D-
kuju - Kaablipikkus (mm): 620
- Pistikkontaktide arv: 4
-
Lambda andur: Diagnoosisond,
Keere eelmääritud - Ülekandeliinide arv: 4
- Tootja: VEMO GERMANY
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

-
Lambda andur: Diagnoosisond,
Titaanandur, soojendatud - valikuliselt:
- Kaablipikkus (mm): 700
- Tootja: DELPHI
-
Nimetus: DE ES20168-
12B1 - Kvaliteediklass: PJ
Lisainfo: "Tootja: DELPHI
BORA (1J2), 10.98-09
(kvaliteediklass: PJ)"

- Lambda andur: soojendatud
- Soovituslik vahetusintervall (km): 160 000
- Pistikkontaktide arv: 4
- pikkus üle kõige (mm): 470
- Üldine informatsioon: lambda probe; 4 wire
- Tootja: VIKA

- Ehitusaasta alates: 04.2003
- Lambda andur: Diagnoosisond
- Pinge [V]: 12
- Pikkus (mm): 760
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 4
-
Kaal (kg): 0,
15 - Takistus [oom]: 9
- Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Tootja: SKV GERMANY
- Nimetus: CE 09SKV694

- Takistus [oom]: 9
- Ühendushulk: 4
- Pikkus (mm): 350
- Ülekandeliinide arv: 4
- Kaablipikkus (mm): 350
- Lambda andur: soojendatud
- Tootja: MAGNETI MARELLI
- Nimetus: MM OSM093

-
Lambda andur: Diagnoosisond,
soojendatud -
Väliskeerme mõõde: M18 x 1,
5 - Võtmekaugus: 22
- Ülekandeliinide arv: 4
- Kaablipikkus (mm): 580
-
Kaal (kg): 0,
097 - OE-numbri jaoks: 06A 906 262 AH
- Nimetus: SW 33 10 3202
- Tootja: SWAG
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

-
Lambda andur: Diagnoosisond,
Titaanandur, soojendatud - Installatsiooni pool: pärast katalüsaatorit
- Kaablipikkus (mm): 740
- Tootja: DELPHI
-
Nimetus: DE ES20348-
12B1

- Mootorikood: BAH
- Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
- Piirangutega toode/piirangu info 2: ilma pistikuta
- Pistikkontaktide arv: 4
- OE-numbri jaoks: V99760001
- Kaablipikkus (mm): 210
- Ülekandeliinide arv: 4
- Pikkus (mm): 350
- Installatsiooni pool: pärast katalüsaatorit
- Tootja: VEMO GERMANY
Lambda andur: Diagnoosisond, Sõrmesensor, soojendatud, Keere eelmääritud Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

- Ehitusaasta alates: 04.2003
- Lambda andur: Diagnoosisond
- Pinge [V]: 12
- Pikkus (mm): 650
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 4
-
Kaal (kg): 0,
15 - Takistus [oom]: 6
- Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Tootja: SKV GERMANY
- Nimetus: CE 09SKV706

-
Lambda andur: Sond,
Diagnoosisond -
Installatsiooni pool: katalüsaatori ees,
pärast katalüsaatorit - Plokieraldus:
- Ülekandeliinide arv: 4
- Soovituslik vahetusintervall (km): 160 000
- Ühendus/klemm: vajadusel kohandada pistikühendus
- Tootja: BOSCH
- Nimetus: BS 0258986615

- Lambda andur: soojendatud
- Soovituslik vahetusintervall (km): 160 000
- Pistikkontaktide arv: 4
- pikkus üle kõige (mm): 330
- Üldine informatsioon: lambda probe; 4 wire
- Tootja: VIKA

- Ehitusaasta alates: 04.2003
- Mootorikood: BAH
- Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
- Ühendushulk: 4
-
Pistikukatte kuju: D-
kuju - Kaablipikkus (mm): 225
-
Keermemõõt: M18 x 1,
5 - Pikkus (mm): 350
- Pistikkontaktide arv: 4
-
Versioon: ZR-
PLANAR - Lambda andur: Keere eelmääritud
- Tootja: VEMO GERMANY
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

- Ühendushulk: 4
- Pikkus (mm): 721
- Ülekandeliinide arv: 4
- Takistus [oom]: 9
- Kaablipikkus (mm): 721
- Lambda andur: soojendatud
- Tootja: MAGNETI MARELLI
- Nimetus: MM OSM001

-
Installatsiooni pool: ees,
katalüsaatori ees -
Lambda andur: Sond,
Diagnoosisond, Keere eelmääritud - Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
- Kaablipikkus (mm): 720
- Ülekandeliinide arv: 4
- Tootja: VEMO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

- Väljalaskesüsteem: eelkatalüsaatori jaoks
- Kvaliteet: OE
- Tootja piirang: DENSO
- Keermemõõt: M18x1.5
- Kaablipikkus (mm): 750
- Pistikkontaktide arv: 4
- Kaal (g): 93
- Brutokaal [g]: 140
- Tootja: DENSO
-
Nimetus: DN DOX-
0150 - Kvaliteediklass: Q
Lambda andur: Sond, soojendatud, Titaanandur, Keere eelmääritud, Bistabiilne andur
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

- Ehitusaasta alates: 04.2003
- Mootorikood: BAH
- Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
- Pistiku värv: pruun
-
Pistikukatte kuju: D-
kuju -
Keermemõõt: M18 x 1,
5 - Pikkus (mm): 570
- OE-numbri jaoks: 06A 906 262 F
- Kaablipikkus (mm): 570
- Pistikkontaktide arv: 4
-
Lambda andur: Diagnoosisond,
Keere eelmääritud - Ülekandeliinide arv: 4
- Installatsiooni pool: pärast katalüsaatorit
- Tootja: VEMO GERMANY
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

- Lambda andur: soojendatud
- Pikkus (mm): 645
-
Väliskeerme mõõde: M18 x 1,
5 - Võtmekaugus: 22
- Ülekandeliinide arv: 4
- Kaablipikkus (mm): 740
-
Kaal (kg): 0,
095 - Nimetus: SW 30 93 4388
- Tootja: SWAG
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

-
OE-numbri jaoks: 06A906262AH,
022906262BG - Kvaliteet: OE
- Tootja piirang: DENSO
- Keermemõõt: M18x1.5
- Kaablipikkus (mm): 650
- Pistikkontaktide arv: 4
- Kaal (g): 189
- Brutokaal [g]: 222
- Tootja: DENSO
-
Nimetus: DN DOX-
2000 - Kvaliteediklass: Q
Lambda andur: Diagnoosisond, soojendatud, Titaanandur, Keere eelmääritud, Bistabiilne andur
Lisainfo: "Tootja: DENSO
POLO SEDAN, 09.02-
(kvaliteediklass: Q)"

-
Käigukasti liik: Käigukast 5 käiku,
Käigukast - Kinnitusaukude hulk: 3
- Pistikkontaktide arv: 6
- vasak/paremroolimine: vasakpoolse roolimise jaoks
- Monteerimist/demonteerimist peab tegema spetsialist!:
- Tootja: HELLA
- Nimetus: HE 6PV008496701
Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

-
Lambda andur: Diagnoosisond,
Titaanandur - Installatsiooni pool: pärast katalüsaatorit
- Kaablipikkus (mm): 750
- Pistikkontaktide arv: 4
- Monteerimist/demonteerimist peab tegema spetsialist!:
- Tootja: HELLA
- Nimetus: HE 6PA358066401
Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

- Lambda andur: Diagnoosisond
- Installatsiooni pool: pärast katalüsaatorit
- Ülekandeliinide arv: 4
- pikkus üle kõige (mm): 760
- ka universaaltootena saadav vaata toode-nr.: 0258986615
- Soovituslik vahetusintervall (km): 160 000
- Ühendus/klemm: vajadusel kohandada pistikühendus
- Tootja: BOSCH
- Nimetus: BS 0258010032

- Lambda andur: Sond
- Installatsiooni pool: katalüsaatori ees
- Ülekandeliinide arv: 4
- pikkus üle kõige (mm): 340
- ka universaaltootena saadav vaata toode-nr.: 0258986615
- Soovituslik vahetusintervall (km): 160 000
- Tootja: BOSCH

- Ehitusaasta alates: 04.2003
- Installatsiooni pool: katalüsaatori ees
-
Lambda andur: Titaanandur,
Keere eelmääritud, soojendatud - Pistikkontaktide arv: 4
- Kaablipikkus (mm): 720
-
Keermemõõt: M18x1,
5 - Lülitusrõhk [bar]: 4
- Pistikukatte kuju: ovaalne
- Tootja: VALEO
- Nimetus: VA 368041

- Lambda andur: soojendatud
- Soovituslik vahetusintervall (km): 160 000
- Ühendus/klemm: vajadusel kohandada pistikühendus
- Pistikkontaktide arv: 4
- pikkus üle kõige (mm): 750
- Üldine informatsioon: lambda probe
- Tootja: BORSEHUNG

- Ehitusaasta alates: 04.2003
- Käigukasti liik: Käigukast
- Lambda andur: Diagnoosisond
- Installatsiooni pool: pärast katalüsaatorit
- Pikkus (mm): 650
- Ülekandeliinide arv: 4
- Tootja: VDO

- Installatsiooni pool: ees
- Lambda andur: Sond
- Pikkus (mm): 465
- Ühenduste arv: 4

- Lambda andur: Sond
- Installatsiooni pool: katalüsaatori ees
- Ehitusaasta alates: 04.2003
- Pikkus (mm): 350
- tehnilise informatsiooni number: Universal 77015
- Tootja: FAE

- Pinge [V]: 12
- Pikkus (mm): 870
- Garantii: 3 aastat garantii
-
Kaal (kg): 0,
13 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Tootja: SKV GERMANY
- Nimetus: CE 17SKV304

- Ehitusaasta alates: 04.2003
- Installatsiooni pool: katalüsaatori ees
-
Lambda andur: Titaanandur,
Keere eelmääritud, soojendatud - Pistikkontaktide arv: 4
- Kaablipikkus (mm): 350
-
Keermemõõt: M18x1,
5 - Lülitusrõhk [bar]: 4
- Pistikukatte kuju: ovaalne
- Nimetus: VA 368212
- Tootja: VALEO

- Lambda andur: Bistabiilne andur
- Garantii: 3 aastat garantii
-
Kaal (kg): 0,
16 - Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Tootja: SKV GERMANY
- Nimetus: CE 09SKV911

- Pistikkontaktide arv: 3
-
Pistikukatte kuju: D-
kuju - Anduritüüp: Hallsensor
- Piirangutega toode/piirangu info 2: ilma kaablita
-
Installatsiooni sügavus (mm): 24,
3 - OE-numbri jaoks: 030907601E
- Lisainfo: 87281 NIS