• Mootorikood: B 5254 FS, B 5244 S
• Length [mm]: 59.5
• Outer Diameter [mm]: 20
• External Thread Size: M10 x 1,5
• Thread Length [mm]: 28.5
• Quality/ Grade: 8.8
• Spanner Size: 13
• Shaft Length [mm]: 21
• Colour: black
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.042
• Tootja: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Control/Trailing Arm Type: Control Arm
• Length [mm]: 280
• Tootja: MAGNETI MARELLI

• Fitting Position: Front Axle Left, Front Axle Right
• Height [mm]: 46
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 32
• Supplementary Article/Supplementary Info: with accessories
• reinforced version:
• Replace in pairs only:
• with environmental seal: Carbon Neutral
• Required quantity: 2
• Tootja: MEYLE

General Information: Better than OE: MEYLE-HD bushings with optimized inner sleeve profile withstand greater forces and provide a longer life and performance.

• Fitting Position: Rear Axle, inner, Right, Lower
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Supplementary Article/Info 2: with fastening material
• paired article number: F8-7695S
• Material: Aluminium
• Quantity Unit: Set
• Tootja: OPTIMAL ZAWIESZENIE

• Tootmise kuupäev alates: 2000
• Fitting Position: Rear Axle
• Weight [kg]: 0.838
• Control/Trailing Arm Type: Control Arm
• Packaging length [cm]: 56.4
• Packaging width [cm]: 5.1
• Packaging height [cm]: 3.9
• Tootja: FEBEST
• Lisainfo: FST2725-V70R

• Roolimisliik: Õõtshoob
• Installatsiooni pool: esisild vasakul, all
• paaris tootenumbrid: ZWD-VV-014
• Seerianumber: ZWD-VV-015
• Tootja: NTY

Lisainfo: Track Control Arm

• Roolimisliik: Õõtshoob
• Hulgaühik: Komplekt
• Installatsiooni pool: all, esisild vasakul
• koonusemõõt (mm): 19
• Materjal: Metall
• Õõtshoovad: Tõmbevarras
• Kvaliteediklass: PJ
• Nimetus: Control arm left

Lisainfo: "Tootja: SRL
VOLVO S/V 70 97-
(kvaliteediklass: PJ)"

• Roolimisliik: Õõtshoob
• Hulgaühik: Komplekt
• Installatsiooni pool: all, esisild paremal
• koonusemõõt (mm): 19
• Materjal: Metall
• Õõtshoovad: Tõmbevarras
• Kvaliteediklass: PJ
• Nimetus: Control arm right

Lisainfo: "Tootja: SRL
VOLVO S/V 70 97-
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left, Lower
• paired article number: S060771
• Cone Size [mm]: 19
• Control/Trailing Arm Type: Control Arm
• Tootja: GSP

• Fitting Position: Front Axle Right, Lower
• paired article number: S060772
• Cone Size [mm]: 19
• Control/Trailing Arm Type: Control Arm
• Tootja: GSP ZAWIESZENIE

• Roolimisliik: Õõtshoob
• põhikeha materjal: Malm
• Installatsiooni pool: esisild paremal
• Netokaal [kg]: 3
• Läbimõõt [mm]: 19
• paaris tootenumbrid: G40.4131/C
• Läbimõõt 1 (mm): 19
• Piirangutega toode/piirangu info 2: koos kande-/juhtliigendiga
• Nimetus: OMG G40.4130/C
• Tootja: OMG

• Ehitusaasta kuni: 01.1999
• Installatsiooni pool: esisild alla
• Roolimisliik: Õõtshoob
• Garantii: 3 aastat garantii
• Kaal (kg): 3,8
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: SKV ESEN

• Fitting Position: Front Axle Left
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with bolts/screws
• paired article number: 49398712
• Nimetus: COC 49398711
• Tootja: CORTECO

• Nimetus: Control arm left
• Kvaliteediklass: PJ

Lisainfo: "Tootja: TEKNOROT
VOLVO S/V 70 97-
(kvaliteediklass: PJ)"

• Nimetus: Control arm right
• Kvaliteediklass: PJ

Lisainfo: "Tootja: TEKNOROT
VOLVO S/V 70 97-
(kvaliteediklass: PJ)"

• Installatsiooni pool: esisild vasakul
• Roolimisliik: Õõtshoob
• Materjal: Hallmalm
• paaris tootenumbrid: 20-20072-1
• Kaal (kg): 3,17
• Nimetus: DY 20-20072-2
• Tootja: DYS

• Installatsiooni pool: esisild paremal
• Roolimisliik: Õõtshoob
• Materjal: Hallmalm
• paaris tootenumbrid: 20-20072-2
• Kaal (kg): 3,17
• Nimetus: DY 20-20072-1
• Tootja: DYS

• Ehitusaasta kuni: 01.1999
• Installatsiooni pool: esisild alla
• Roolimisliik: Õõtshoob
• Garantii: 3 aastat garantii
• Kaal (kg): 3,8
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tootja: SKV GERMANY
• Nimetus: CE 04SKV024

• Installatsiooni pool: esisild paremal
• Control/Trailing Arm Design: Triangular Control Arm
• paired article number: VKDS 326088 B
• Length [mm]: 335
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Supplementary Info: with synthetic grease
• Supplementary Article/Info 2: with ball joint
• Tootja: SKF
• Nimetus: SK VKDS326090B

• Installatsiooni pool: esisild vasakul, väljas
• Fitting Position: Left, Lower
• Material: Sheet Steel
• paired article number: TC877
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with ball joint
• Length [mm]: 300
• Width [mm]: 68
• Tootja: DELPHI
• Nimetus: DE TC876

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Lower, Front Axle Right
• Article number of the recommended special tool: V99-1020
• paired article number: V95-0026
• Axle alignment required after fitting:
• Weight [kg]: 2.8
• Tootja: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: Esisild, all
• Ehitusaasta alates: 01.1997
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Left, Lower Front Axle
• Article number of the recommended special tool: V99-1020
• paired article number: V95-0028
• Axle alignment required after fitting:
• Weight [kg]: 3.257
• Tootja: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Ehitusaasta kuni: 11.1999
• Installatsiooni pool: Esisild, all
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Right, Lower Front Axle
• Axle alignment required after fitting:
• paired article number: V95-0029
• Article number of the recommended special tool: V99-1020
• Weight [kg]: 3.257
• Tootja: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: esisild vasakul
• paired article number: VKDS 326090 B
• Length [mm]: 335
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Supplementary Info: with synthetic grease
• Supplementary Article/Info 2: with ball joint
• Tootja: SKF
• Nimetus: SK VKDS326088B

• Installatsiooni pool: esisild paremal, väljas
• Fitting Position: Right, Lower
• Material: Sheet Steel
• paired article number: TC876
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with ball joint
• Length [mm]: 300
• Width [mm]: 68
• Nimetus: DE TC877
• Tootja: DELPHI

• Installatsiooni pool: esisild vasakul
• Control/Trailing Arm Type: Control Arm
• Material: Cast Steel
• Supplementary Article/Info 2: with ball joint
• paired article number: 821 0449 10
• SVHC: No SVHC present!
• Tootja: FAG
• Nimetus: LU 821044810

• Installatsiooni pool: esisild paremal
• Control/Trailing Arm Type: Control Arm
• Material: Cast Steel
• Supplementary Article/Info 2: with ball joint
• paired article number: 821 0448 10
• SVHC: No SVHC present!
• Nimetus: LU 821044910
• Tootja: FAG

• Fitting Position: Front Axle, Lower, Right
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with rubber mount
• Material: Steel
• paired article number: JTC917
• Tootja: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, Lower, Left
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with rubber mount
• Material: Steel
• paired article number: JTC916
• Tootja: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, Lower, Left
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with rubber mount
• Material: Steel
• paired article number: JTC1064
• Tootja: TRW

SVHC: No information available, please contact the manufacturer!

• Installatsiooni pool: esisild paremal, väljas, all
• Cone Size [mm]: 19
• Supplementary Article/Info 2: with ball joint, with rubber mount
• Material: Cast Steel
• Length [mm]: 285
• Control/Trailing Arm Type: Control Arm
• as standard:
• paired article number: 210586
• Weight [kg]: 3.172
• Installation Information: Important: Observe Fitting Instructions
• Tootja: A.B.S.

• Mootorikood: B 5254 S, B 5254 FS
• Ehitusaasta kuni: 02.2000
• paired article number: 14760
• Outer Diameter [mm]: 19
• Material: Cast Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Left
• Weight [kg]: 2.85
• Observe service information:
• Tootja: FEBI BILSTEIN

Supplementary Article/Info 2: with ball joint, with rubber mount, with fastening material General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Lower, Right
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with rubber mount
• Material: Steel
• paired article number: JTC1065
• Tootja: TRW ZAWIESZENIE

SVHC: No information available, please contact the manufacturer!

• Mootorikood: B 5254 S, B 5254 FS
• Ehitusaasta kuni: 02.2000
• paired article number: 14759
• Material: Cast Steel
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front Axle Right
• Weight [kg]: 2.8
• Observe service information:
• Tootja: FEBI BILSTEIN

Supplementary Article/Info 2: with ball joint, with fastening material, with rubber mount General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Roolimisliik: Õõtshoob
• põhikeha materjal: Malm
• Installatsiooni pool: esisild vasakul
• Netokaal [kg]: 3,38
• Läbimõõt [mm]: 19
• paaris tootenumbrid: G40.4132/C
• Läbimõõt 1 (mm): 19
• Piirangutega toode/piirangu info 2: koos kande-/juhtliigendiga
• Nimetus: OMG G40.4133/C
• Tootja: OMG

• Roolimisliik: Õõtshoob
• põhikeha materjal: Malm
• Installatsiooni pool: esisild paremal
• Netokaal [kg]: 3 382
• Läbimõõt [mm]: 19
• paaris tootenumbrid: G40.4133/C
• Läbimõõt 1 (mm): 19
• Piirangutega toode/piirangu info 2: koos kande-/juhtliigendiga
• Nimetus: OMG G40.4132/C
• Tootja: OMG

• Installatsiooni pool: esisild paremal
• Control/Trailing Arm Design: Triangular Control Arm
• paired article number: VKDS 326085 B
• Length [mm]: 375
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Supplementary Info: with synthetic grease
• Supplementary Article/Info 2: with ball joint
• Tootja: SKF
• Nimetus: SK VKDS326084B

• Installatsiooni pool: esisild vasakul
• Control/Trailing Arm Design: Triangular Control Arm
• paired article number: VKDS 326084 B
• Length [mm]: 375
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Supplementary Info: with synthetic grease
• Supplementary Article/Info 2: with ball joint
• Tootja: SKF
• Nimetus: SK VKDS326085B

• Installatsiooni pool: esisild vasakul, väljas
• Fitting Position: Left, Lower
• Material: Cast Steel
• paired article number: TC979
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with ball joint
• Length [mm]: 370
• Width [mm]: 335
• Height [mm]: 65
• Nimetus: DE TC978
• Tootja: DELPHI

• Installatsiooni pool: esisild paremal, väljas
• Fitting Position: Right, Lower
• Material: Cast Steel
• paired article number: TC978
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with ball joint
• Length [mm]: 370
• Width [mm]: 335
• Height [mm]: 65
• Nimetus: DE TC979
• Tootja: DELPHI

• Installatsiooni pool: esisild vasakul
• valikuliselt:
• Control/Trailing Arm Type: Control Arm
• Material: Cast Steel
• Supplementary Article/Info 2: with ball joint
• paired article number: 821 0451 10
• SVHC: No SVHC present!
• Tootja: FAG
• Nimetus: LU 821045010

• Installatsiooni pool: esisild paremal
• valikuliselt:
• Control/Trailing Arm Type: Control Arm
• Material: Cast Steel
• Supplementary Article/Info 2: with ball joint
• paired article number: 821 0450 10
• SVHC: No SVHC present!
• Tootja: FAG

• vajaminev tükihulk: 1
• Ehitusaasta kuni: 02.2000
• Installatsiooni pool: esisild paremal
• Roolimisliik: Õõtshoob
• Tootja: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Installatsiooni pool: esisild vasakul, all
• Piirangutega toode/piirangu info 2: koos kande-/juhtliigendiga, koos kummlaagriga
• Roolimisliik: Õõtshoob
• paaris tootenumbrid: 58024602
• Garantii: Garantii 3 aastat või kuni 75 000 km
• Tootja: METZGER

• Fitting Position: Front Axle, Lower, Left
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Info 2: with rubber mount
• Material: Steel
• paired article number: 24604 02
• Tootja: LEMFORDER